Attwood 17211-3 sada vypouštěcí zátky a přijímače, ¾-palcový průměr 1dílná zástrčka, závitový přijímač, lisovaný černý plast

Name: Attwood 17211-3 sada vypouštěcí zátky a přijímače, ¾-palcový průměr 1dílná zástrčka, závitový přijímač, lisovaný černý plast
Brand: attwood
SKU: 0022697004253
Price: 889.11 CZK
Availability: InStock

Brand:attwood

3.5/5

Kč
889.11

Nerezová ocel. 3 1/4 průměr. Čtyři otvory pro 6 spojovacích prvků. Obsahuje upevňovací šrouby a elastomerové těsnění pro vodotěsné uchycení. Lisovaný přídržný popruh. Lisovaný černý ABS plast se závitovým pouzdrem. 1 kus zástrčky o průměru 3/4 palce.

Množství

Přidat do košíku Kup nyní

EAN: 0022697004253

Kategorie Sport a outdoor, Sport a fitness, Jachting a plachtění, Čluny a vybavení, Lodní instalatérství, Vodovodní zařízení Armatury,

Brand	attwood
Color	Unspecified
Item Dimensions LxWxH	4.5 x 96 x 3.5 inches
Material	Other

5 Star

4 Star

3 Star

2 Star

1 Star

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena^*

Vase hodnoceni

Scritto da: Beachdog3

Works well for drain on dinghy

I needed to have a drain plug on a dinghy that sits up on wheels on the back. I put a drain on the front of the dinghy. I needed something fairly narrow to work and this fit the bill.

Scritto da: Don in South Carolina

And it leaks…

Well I cut a hole. I install plug. Looks good, but a piece of foam and two screws to seal off the water? I Put water in boat and it leaks. If it won’t hold the water inside the boat, it won’t keep water out of the boat. At least I didn’t go on the lake to find this out. Silicone next time. Now, what to do about this hole in my boat…

Scritto da: Mr. Dale A. Stagg

Good Item and Easy to Install

My Hobie Revolution Kayak had one drain plug for the hull and it was on the very back and towards to top. I wanted a drain plug towards the bottom to allow draining while it is sitting right side up. This item was easy to install and includes a rugger gasket, but I also added a little silicone also to insure a good seal. My only issue with this item is it has more profile sticking out from the kayak than I would have preferred and would have loved it to have most of the profile on the inside of the kayak, but this works well either way. I am happy with this and I added one to front and back side of my kayak.

Scritto da: Brook Roberts

Works as expected.

I'm very satisfied with this drain. I put two in a kayak and was pleased with the result. When installing I used a 7/8 spade bit and it was a tight fit but worked well. I also used some silicone to make the seal water resistant because my surface was slightly curved so I didn't use the included seal. My only gripe would be that if you are installing this in a kayak be careful of the mounting screws protruding into the kayak. They are sharp and could easily puncture, tear or otherwise damage anything that brushed against them.

Scritto da: David.A

Does the job!

I was looking for a small drain plug for my 12ft aluminum boat, it had no drain plug so water would just collect at the bottom very fast. This plug worked great and after using it for a year, I do wish it was a bit bigger so that leaves didn't plug it easily. I might just remove the parts that keeps it from being removed completely to allow more draining. I knew the size and went for it, I am happy with it as it does what it was meant to. Construction, very strong and sturdy, no problem of it moving or bending as it's screwed in. It's a plastic drain, it does what you need it to do, make sure you understand its size before buying, get some good marine sealant and the job should be easy.

Scritto da: A2theJackson

Dependable Drain

Added this to the rear of an Old Town Otter plus kayak that didnt' have a drain. I got the kayak as a secondary so my friends wouldn't have to rent/borrow to go on trips with me, and it was a very basic kayak (but cheap and stable). Added to the top just before the foam floats in the rear; it drains very well and easily. It does not drain all the water out, but that is bc I placed it high due to the foam packs. I solved the water issue with some car wash sponges under the seat to soak up what little water remains. Point is, it's a plastic drain. It seals well (I used marine sealant also), is easy to open/close, and was low priced. I do like the attached plug so that you won't lose it.

Scritto da: deepdiver1

Do it yourself and save a bundle

The plugs were easy to install. I completed the two plugs in about 20 minutes. Taking in consideration, the price of the plugs, I saved my self about $300.00 by doing it myself.

Scritto da: Eric

Good quality, slightly misleading.

It's a good quality drain plug, but the advertised dimensions are a bit misleading. The interior diameter of the drain is 3/4 in, exterior diameter is a tad over 1 inch. I used a stepped bit to cut the hole. I'm not sure a 1 inch hole saw would be big enough.

Scritto da: Larry Ketchabaw

Perfect solution for what I needed

Did exactly what it was supposed to.

Scritto da: Barry Hajewich

fit perfectly.

This kit fit perfectly. the product was described accurately and shipping was quick.

Scritto da: Amazon Customer

Works as it should

Added drain plugs to my WJ500. Good after market product with gasket and screws.