Cen-Tec Systems Premium Shop vakuová prodlužovací hadice, 30 stop 30'

Name: Cen-Tec Systems Premium Shop vakuová prodlužovací hadice, 30 stop 30'
Brand: Cen-Tec Systems
SKU: 0810178030095
Price: 3627.80 CZK
Availability: InStock

Brand:Cen-Tec Systems

3.7/5

Kč
3627.80

Hadice 93158 Cen-Tec Systems je 30 stop dlouhá prodlužovací hadice, která se vejde do vašeho domácího vysavače. Vysoce kvalitní hadice odolná proti nárazu o průměru 1,25 palce je vysoce flexibilní a odolná, s hladkým vnitřkem, který zlepšuje proudění vzduchu. Na jednom konci je 1,25 palcová otočná trubka, která se hodí do standardních 1,25 palcových (32 mm) odsávacích tyčí a nástrojů. Na druhém konci je 2,125 až 2,25 palcový dílenský vysavačový adaptér, který bude fungovat s většinou modelů Shop-Vac, Ridgid, Craftsman, Stanley, Vacmaster a také s většinou dalších značek vysavačů v dílnách. Hadice má stříbrnou barvu a je ideální pro připojení k vysavači ve vašem obchodě, abyste mohli vyčistit garáž, auto nebo domácí obchod. Vynikne i jen vysáváním po domě.

Množství

Přidat do košíku Kup nyní

EAN: 0810178030095

Kategorie Nástroje a domácí potřeby, Elektrické a ruční nářadí, Díly a příslušenství elektrického nářadí, Příslušenství k vysavačům a sběračům prachu, Hadice,

Konec nádrže je navržen tak, aby pasoval na všechny hlavní značky domácích vysavačů včetně Shop-Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, Workshop, Fein, Stanley, Porter-Cable. Nárazuvzdorná hadice je vysoce flexibilní a odolná. 1,25palcová otočná trubka bude fungovat se všemi 1,25palcovými doplňkovými nástroji, hůlkami a nástavci. Hladký vnitřek hadice pro vynikající proudění vzduchu. 30 celých stop vysavače do vašeho dílenského vysavače je ideální pro čištění aut, garáží nebo domácích obchodů. Dodává se s vakuovým adaptérem 2,125 palce až 2,25 palce, který se hodí pro všechny hlavní značky vysavačů v dílnách.

Assembly required	No
Batteries required	No
Country of Origin	USA
Customer Reviews	4.6 4.6 out of 5 stars 1,558 ratings 4.6 out of 5 stars
Included Components	30 Foot Hose with installed shop vacuum adapter
Is Discontinued By Manufacturer	No
Item model number	93158
Item Weight	5.5 pounds
Manufacturer	Cen-Tec Systems
Product Dimensions	25 x 17 x 7 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena^*

Vase hodnoceni

Scritto da: Jazz

Good deal for long hose

I only needed about 1/2 this length, but at time of purchase, this was the best value on Amazon for a hose that fit my needs. It's well made & the extra length means I can use it in more places without having to move the vac (it's not stiff - coils up well - so not a pain to be too long).

Scritto da: Mike Cummings

Great hose. This is my second hose.

The media could not be loaded. Great commercial first grade hose. Worth paying more than manufacturer’s hoses. I have my shop vac in the basement and with the first 50’ hose in was able to clean the basement and first floor of the house. The house has wood floors. With this second hose I can go all the way up to the second floor to clean. The best thing is even with 100’ of hose it does not lose and suction due to the hose having a larger inside dimension and less kinking than manufacturer hoses.

Scritto da: Amazon Customer

As good or better than original

Purchased the Cen-Tec Systems Premium Shop Vacuum Extension Hose, 20 Feet for my wall hanging shop vac in the garage. The hose is a few feet longer, seems more flexible because of a "softer" vinyl material which may be nicer when pulling into vehicles. The ends are more durable especially at the connection point to the hose, which has a swivel connection point vs a rigid attachment point. Only used a few times so unsure on the durability but I can't believe it will fail under normal use.

Scritto da: Jess

Quality

Great quality and light weight

Scritto da: WILLIAM H. PAULY

WORKS AS ADVERTISED

i use it to clean my gutters, it and a curved end attachment, no ladder needed

Scritto da: B

Now That I've Had A Chance To Put This Hose Through Some Real World Cleaning ... Here's What I Found

It fits my "Shop Vac" (a Ridgid shop-vac-like vacuum) that uses 2.5" hoses. The connector included that connects to the vacuum is tapered so that it'll fit anything that uses hoses sized between 2.125 & 2.5 inches. What you get in the box is the gray plastic hose and two black plastic ends that you screw onto the hose. They do not lock on or even stay particularly firmly attached from friction. The one end that connects to whatever tool you're using twists completely around so that what every orientation you need for your tool can readily be accommodated. The hose itself is surprisingly durable. Better than the hoses that normally come with a shop-vac-like vacuum by A LOT. Despite it's description, the hose isn't particularly stream-lined, air-flow-wise, and attaching it to the vacuum raises the motors RPM considerably as the motor struggles to pull in air through this 1.25 inch hose (half the diameter) connecting to a vacuum designed for a 2.5" hose. Air-flow is significantly impinged, so don't expect big sucking action from your monster 6hp super-sucker. The hose is fairly crush-proof and quite flexible. It's slick surface helps the hose to slide along surfaces, but the DEEP spiral crevice that runs the length of hose tends to try and snag on things, so it's basically a wash, sliding-wise. The length, combined with the great flexibility, are a welcome modification to the normal routine encountered while vacuuming with shop-vac-like vacuums. The hose is super-slinky and slinks right along, when it's not getting snagged on something Like I said, earlier: it isn't snag-prone, nor is it snag-proof. It just snags sometimes. With these few gripes aside, overall I'm happy with the product. It is doing what I need doing and saving me all kinds of frustration.

Scritto da: The Green Guru

Great Replacement Hose For Automotive Detailers!

I purchased the 30 Ft. version to allow me to keep my ShopVac in one location yet still be able to reach all that hidden dirt in vehicles! I use a 4.5HP metal canister ShopVac, the connector was snug but fits perfectly and suction is just as good as the OEM hose. The swiveling nozzle is awesome to keep your hose from rolling and knotting while you work also!

Scritto da: Elfjoy

Attached to a craftsman shop vac no problem.

Sturdy hose for sucking crap out of my car.

Scritto da: Rémi

Very happy with tube

Very happy. I was conserved it wouldn't fit my cheaper home line shopvac but it does fit just fine. Works great and the quality of the material is better than what I initially had with the shopvac

Scritto da: BarryTorrance

Well made

Perfect hose for my dust collection system,

Scritto da: Cherry Raisin

Affordable solution to have a long hose extension for special needs

Fits Shop Vac vacuums and holds in place during use. Can be used on either the intake or exhaust side of the vacuum thus providing flexibility to exhaust outside and eliminate the need for a HEPA type filter for fine particle vacuuming. Easy to store and requires little space.

Scritto da: Morgan Williams

Just the best

The best system for vacuuming your shop floor, if you have a wand for a regular vacuum kicking around

Scritto da: Amazon Customer

It gets used every day and had stayed in good shape. It connects to any screw type vac ...

It doesnt specify being crush proof but ive stepped on it lots.I use it to hook up our flooring edger to our dust containment system which is used for floor refinishing.It gets used every day and had stayed in good shape.It connects to any screw type vac fitting or a 1 1/4" rubber plumbing fitting.