Cubitron II Scotch-Brite Clean and Strip XT Pro Disc, XO-DC, SiC Extra hrubý, TN, fialový, 4-1/2 palce x 5/8-11, balení 10 kusů TN Rychlá výměna 4-1/2 palce x 5/8-11

Brand:Cubitron

3.1/5

5476.67

Disk Scotch-Brite Clean and Strip XT Pro Disc obsahuje abrazivní minerál z karbidu křemíku začleněný do otevřené nylonové tkaniny. Účinně odstraňuje rez, barvu, okuje, nátěry a lepidla z povrchů, aniž by výrazně změnil základní materiál. Vysoce pevná vlákna jsou vysoce přizpůsobivá, odolávají trhání a zatížení a dobře fungují na hranách obrobku. Díky zvýšené přizpůsobivosti tento kotouč dosahuje větší kontaktní plochy s obrobkem pro rychlejší úběr. Vyhovuje také zvlnění svarových housenek pro leštění svarů bez jejich odstranění a pracuje v těžko dostupných místech bez poškození podkladu. Kromě vysoké přizpůsobivosti nabízí Scotch-Brite Clean and Strip XT Pro Disc nízké vibrace, snížené trhání, nízkou jiskru, vysokou rychlost a dlouhou životnost. To vše dává dohromady kotouč, který můžete na své úhlové brusce s důvěrou natočit. Doporučené aplikace zahrnují čištění, konečnou úpravu, přípravu povrchu, odstraňování okují a odstraňování nátěrů.

Pouze pro průmyslové/pracovní použití. Není určeno pro spotřebitelský prodej ani použití. DOPORUČENÉ APLIKACE: Čištění, konečná úprava, příprava povrchu, odstraňování okují a odstraňování nátěrů. VÝKON BEZ KOMPROMISŮ: Vyšší řezná rychlost, delší životnost, nízké vibrace a nízká jiskra. KONZISTENTNÍ ŘEZ V ČASE: Otevřený nylonový pás odolává zatížení pro konzistentní řezání. OSTRÉ ABRAZIVNÍ ZRNO: Minerální karbid křemíku řeže agresivně a zanechává jemný povrch. DISK DOSAHUJE VĚTŠÍ KONTAKTNÍ PLOCHU: Vysoká přizpůsobivost poskytuje větší kontaktní plochu pro rychlejší odstraňování a zvyšuje produktivitu. REENGINEERED FIBER: Vysoce pevné vlákno odolává trhání a funguje dobře na hranách. FUNGUJE EFEKTIVNĚ A RYCHLE: Rychle odstraňuje rez, barvu, lehké okuje a povlaky z kovu.
Brand Cubitron
Compatible Devices Angle Grinder
Country of Origin USA
Grit Material Silicon Carbide
Item Diameter 4.5 Inches
Item Dimensions LxWxH 0.79 x 4.5 x 4.5 inches
Item model number 05588
Manufacturer 3M
Product Dimensions 0.79 x 4.5 x 4.5 inches; 3.2 Ounces

3.1

9 Review
5 Star
65
4 Star
10
3 Star
3
2 Star
9
1 Star
13

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: john moses photography
They’re really good for rust and paint.
These things last a while and are nice and abrasive. Probably the best thing I’ve used for removing rust. The only issue for me was the stupid way it attached to my grinder. It screwed on itself in a weird way that left a piece of the threading metal hanging. And it was sharp. It still needs the lock nut to hold it on but had to be screwed on. Kinda weird and unnecessary.
Scritto da: Michael S.
Great for removing mill scale
I love these things. They're excellent for taking off mill scale, which is exactly what I needed. They don't clog up like flapper disks. They don't wear away the steel quickly like grinding discs. One thing to note, these are not for all purposes. These things probably take off paint great, but it turns out that my paint had a clay-like filler material underneath, which clogged right up on these discs. But what they're meant for, these are fantastic. They're the best I've found for removing mill scale and brightening the finish on steel.
Scritto da: Jimmyp
Great alternative to flap discs
I use these on the front side of the metal art pieces I create to give me a uniform appearance. They would work on the dross side, but they wear down too fast and are too expensive to be wasting on a side that won't be visible.
Scritto da: C. Clendening
Bad Axx and last a long time
Mill scale and metal work.... no problem!
Scritto da: Mike M.
Not 3M
These are NOT 3m scotchbrite disks, rather, some cheap foreign imitation.
Scritto da: Jin Russell
Wrong description,
Product is silicon carbide abrasive , not aluminum oxide A XCS,. the description is wrong. had to return and order from a different supplier
Scritto da: Chris Barton
off center discs
Several discs made off center
Scritto da: NoMore SurePost
Fantastic cut, horrible mount
For 7" TN quick change. After using the 4 1/2" versions, I decided to get some 7" disks. Same fantastic cut as the 4 1/2", biggest piece of junk quick mount, not like the nice plastic one on the 4 1/2". It is a stamped steel 1 thread wonder that lasted all of 5 minutes before falling off the disk. Fortunately, it has a standard center hole size and my type 27 mounting hardware worked fine. This disk is great for removing mill scale.
Scritto da: SHAWN BAINES
great producy
auto retoration

Související produkty

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array