CURT 56217 Vlastní 4kolíkový kabelový svazek návěsu na straně vozidla, pasuje na vybraný Toyota Highlander, Lexus RX350

Name: CURT 56217 Vlastní 4kolíkový kabelový svazek návěsu na straně vozidla, pasuje na vybraný Toyota Highlander, Lexus RX350
Brand: CURT
SKU: 612314562176
Price: 1832.15 CZK
Availability: InStock

Brand:CURT

3.7/5

Kč
1832.15

Vlastní kabelové konektory CURT představují nejjednodušší způsob, jak vybavit vaše vozidlo připojením kabeláže přívěsu CURT. Jsou vyrobeny pomocí nejmodernějších technologií v oboru a každý z nich je přizpůsoben tak, aby fungoval s konkrétní značkou a modelem. Někteří výrobci automobilů instalují na vozidlo speciální zásuvku, která se používá pro kabeláž mezi vozidlem a přívěsem. Ačkoli tato speciální zásuvka není vybavena na každém vozidle, vlastní kabelový konektor CURT – také nazývaný T-konektor – využívá zásuvku pro jednoduchou instalaci bez stresu. Namísto toho, abyste museli stříhat, spojovat a pájet do kabelového systému vašeho vozidla, vlastní konektor kabeláže používá jedinou zástrčku kompatibilní s OEM a okamžitě poskytuje standardní, univerzální kabelové připojení vozidla k přívěsu, obvykle ve formě 4cestného byt. Všechny vlastní kabelové konektory CURT jsou vyrobeny speciálně pro vozidlo pro co nejjednodušší instalaci a co nejlepší přizpůsobení. Tento konkrétní zásuvný konektor poskytuje 4cestnou plochou zásuvku a je navržen jako vlastní možnost zapojení pro některé roky vozů Toyota Highlander a Lexus RX350 (může být vyžadována tovární tažná sada; pro ověření kompatibility vašeho vozidla viz informace o aplikaci) . Dodává se s veškerým potřebným hardwarem pro navázání pevného spojení. Dodává se také s prachovým krytem, který udržuje zásuvku konektoru čistou, když se nepoužívá. Pro zajištění dlouhodobé spolehlivosti jsou všechny vlastní kabelové konektory CURT důkladně testovány na optimální funkčnost. Stres je to poslední, co byste měli cítit při tažení přívěsu – ať už táhnete svůj obytný vůz do oblíbeného kempu, své čtyřkolky do lovišť nebo rybářskou loď do nového skrytého hotspotu. V CURT si myslíme, že vaše tažné zařízení by mělo přispívat k požitku z vašeho zážitku, nikoli jej snižovat.

Množství

Přidat do košíku Kup nyní

EAN: 612314562176

Kategorie Automobilový průmysl, Příslušenství pro exteriér, Tažné zařízení a navijáky, Spojky na přívěs Příslušenství, Kabeláž,

Typ elektrického systému: 3W. KRYT PROTI PRACHU. Pro podporu dlouhodobého používání a odolnosti vůči povětrnostním vlivům je tento 4pólový kabelový svazek pro osvětlení přívěsu dodáván s pryžovým protiprachovým krytem. Když se nepoužívá, snadno se hodí na 4cestný plochý konektor a chrání jej před vnějšími vlivy. SPOLEHLIVÝ VÝKON. Tento 4cestný kabelový svazek přívěsu je vyroben technologií povrchové montáže. Tento typ obvodů generuje méně tepla, optimální intenzitu světla a trvanlivý výkon. SPECIFICKÉ VOZIDLO. Tento kabelový svazek pro auto-přívěs pro trh s náhradními díly je navržen pro vybrané roky vozů Toyota Highlander a Lexus RX350 (může být vyžadována tovární tažná sada). STANDARDNÍ KONEKTOR. Tuto zásuvnou 4-plochou kabeláž přívěsu lze použít k připojení koncových světel přívěsu, brzdových světel a směrových světel. 4cestná kabeláž osvětlení přívěsu je oblíbená u široké řady přívěsů a přidává všestranné možnosti tažení vašeho vozidla. SNADNÁ INSTALACE. Žádné řezání! Žádné spojování! Tato sada kabelového svazku přívěsu se zapojuje do stávající tovární kabeláže na vašem vozidle a vybavuje ji standardním zadním 4kolíkovým konektorem kabeláže přívěsu pro připojení a tažení přívěsu.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 1,409 ratings 4.7 out of 5 stars
Exterior	‎Painted
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9 x 4 x 3 inches
Item model number	‎56217
Item Weight	0.4 Kilograms
Item Weight	‎14.1 ounces
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎56217
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎BKDK56217
Product Dimensions	‎9 x 4 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena^*

Vase hodnoceni

Scritto da: Carolyn Ann

Won't work on 2020 Lexus Rx350

4 pin connector is male should be female. I had to return product. Also Curt reps (2) were no help. Last one told me I was looking at wrong connector, and it should not be outside the cabin, Wrong, it is outside left rear close to exhaust. Curt does not have a kit for my car which is not equipped with a tow pkg. Don't fret there is a kit available from Tekonsha, PN 118255. The installation is simple as well. Good luck!

Scritto da: Aceman

Where to put the 10 Amp fuse in the vehicle is the only confusing part of the instructions.

So as most folks said this is very easy to install. I installed it in a 2015 Highlander Hybrid. Plenty of videos on the Internet as to how to reach the wiring in the back of the vehicle so check those out. But there are a few things you should know and reading this should make it easier for you than it was for me. Once you get to the point where you have removed the pieces and hooked up the two connectors, you have two decisions to make. First is whether to drill a hole for the ground wire screw provided or use a screw or bolt already in the vehicle. I chose to drill the hole, sand and that's the best option in my opinion because you don’t need to sand any nuts or screws and you can put that screw where you want it--there are plenty of safe places to drill in the rear near where the adapter plugs in. The second decision is where to put the 4-pin plug (inside or outside the vehicle). I think the best option is to leave it inside the vehicle unless you will be using it a lot. You run it to the compartment where the spare tire tools are. I ran it through the piece of plastic that goes over the battery--see the picture (non-hybrid owners will not have a battery in the back), When you leave it there, it’s easy to get to--you never see it unless you use it and you don't need to worry about running it under the car and mounting it somewhere. Also, if it is outside the vehicle it can corrode, the wires can be cut, it can be damaged, etc. The only downside is it sticks out the back of the vehicle when in use, so if you are anal and don't want to see the wires then run it under and mount it. If you do run it under, the hybrid drain hole is in a different place from regular Highlanders, or at least it was from the one I saw in the video for a non-hybrid. In a hybrid, it is between the battery and the rear at the bottom—you’ll probably need a light to see it. I was confused by a video of a non-hybrid which showed the drain plug against the back of the vehicle (i.e., the hole points out the rear of the vehicle rather than down to the pavement as it is in the hybrid). As to the 10 amp fuse (the one that goes in the vehicle not the inline one in the adapter) the instructions say to consult the manual as to where to put it (there were two in my kit you only need one plus the inline one so you’ll use 2 out of the 3). Well, I could not find where in the manual to put the "trailer" fuse, but I watched the etrailer video and kind of "guessed" where it was from that. First, the fuse box is under the engine hood and it’s the main box (there is more than one) --see the picture as to where that fuse goes. There were only 2 possible places for it and it's the one closest to the front of the vehicle. Next, you must test your installation. If you do not have a trailer to hook up to it (or even if you do) there is a very cheap (under $7) and easy solution. Do yourself a HUGE favor and buy a tester. They are cheap and I don’t care if you are an electrician and have all kinds of ways to test it, this is so easy using a generic tester is not worth the extra trouble to save $7. I bought the SeaSense EZ TROUBLESHOOTER Circuit Tester here on Amazon and highly recommend it. Did I mention you should buy the tester? Finally, once you reconnect the negative post on the battery and clean up, you’ll try to close the hatch door with the button on the door, it is probably going to beep at you and not close. The reason is that you disconnected the battery (assuming you do during installation and you should) with the door open the door "open/close sensor" won’t know whether it's open or closed hence the beeping. Close the door manually and it should work fine after that.

Scritto da: Stephen Cutlip

durable and well made

curt makes good products, durable, heavy duty

Scritto da: Greg Crockett

missing M8 nut for grounding attachment.

missing M8 nut for grounding attachment. otherwise fine.

Scritto da: Karina Van Camp

Perfect fit, easy install

Installed on my 2011 Toyota Highlander LTD and it was a perfect fit. Found a utube video and installed in about 20 minutes.

Scritto da: ktennyson77

2010 Highlander WITH Tow Package and Still Needed This Converter!

I purchased this for my 2010 Toyota Highlander WITH tow package. I made the mistake of trusting the etrailer.com website which stated I only needed the 4-wire adapter for the rear of the SUV to hook to the trailer lights since I had the factory tow package. I have my original sticker for my vehicle which states that is has the tow package, which apparently only means it has the transmission cooler installed but no converter or flat 4-wire trailer plug for trailer lights. I did my research and verified the transmission cooler was installed by looking at the front air dam on the driver side through the small lovers and seeing the cooler itself, check. Then I opened the rear hatch and removed two rear floor panels and driver's side rear corner panel which revealed a black plastic tub held by two thumb screws. Remove the screws and you will find a small rectangular white plug, this is where the pig tail will plug in to go to the trailer lights. I cut a slit in the 2" rubber grommet and fed the pig tail through it to the rear hitch. I drilled a few small holes in the plastic underneath the rear bumper and used some zip ties to secure the wiring in place. After taking 15 minutes to perform the above task when I purchased CURT 56042 T-Connector only, a few days later I arrived at the U-haul dealership on a Friday evening to pick up the trailer to use for our 2,000 mile cross country move. I hooked up the tail lights and they did not work. Next, I broke out the manual to check the fuse box layout and found that the 30A towing fuse was not installed and I was like "DUH" so I installed a spare and the light still did not work. I took the trailer home to figure it out there and that is when I discovered I was missing the converter. The first clue to check and see if your Toyota is pre-wired for towing is to check and see if the fuse has been installed for towing in the fuse box. This is located under the hood on the driver's side. Next, check to see if the converter is installed which is under the dash on the driver's side. You should see a large white male rectangular plug. If there is nothing plugged into it, you are missing the converter. This costs $125 from Toyota and they do not keep it in stock. I was supposed to be on the road by Saturday to make our trip, but Amazon was my quickest option and could get the part for 1/4 of the cost to my by Sunday. I wanted to take the time and share my experience, especially if your Toyota has the tow package.

Scritto da: DJ El Cordero Mayor

Trailer Wiring Harness

Easy to install, watched a YouTube video according to the make, model and year of vehicle. You might need an additional fuse from the auto store for under the hood.

Scritto da: Amazon Customer

Works as designed for a 2009 Highlander

I first put in an aftermarket hitch and trailer wiring for my then-new 2009 Highlander a few weeks after purchasing it. The electronic control module of that installation lasted 13 years before getting flaky, with one trailer light dead and the other continuously on even when the ignition was turned off, and intermittently blowing the 10A fuse. This replacement unit was plug and play and immediately solved the problem. I had been using the loose trailer connector cable from the previous product, but for this upgrade I also purchased a frame mounted connector with a lid ( see https://www.amazon.com/gp/product/B07Z6RZCVF ) to make the whole installation more professional. This involved cutting the provided trailer harness to a shorter length, and using butt splices to connect each of the 4 wires from the two different products. Looks great, works great.

Scritto da: DaveT

Works perfectly on Toyoto Highlander

Perfect fit to existing connectors in the back of the SUV. Included everything, including fuses. Easy to install.

Scritto da: Daniel

Direct fit, easy to install!

Works great, easy installation, great value for the cost.

Scritto da: Customer

Everything you need

Make sure you read the instructions carefully. It fits several models and the instructions are specific for each model. The instructions are good and installation is straight forward as long as you are a contortionist! Kit has everything you need and more and is of good quality.

Scritto da: Adam M.

Simple and easy

Extremely easy installation, works great. No issues! Search you tube for the video to help with your installation. Doesn't get much easier than this.

Scritto da: Dingaholic

Super easy to install

Bought it for my Highlander. Works like a charm. You have to find instructions from etrailers.