CURT 56320 Vlastní 4kolíkový kabelový svazek návěsu na straně vozidla, pasuje na vybraný Ford Escape

Brand:CURT

3.5/5

2672.03

Pokud vaše vozidlo není vybaveno elektroinstalací pro tažení přívěsu, je vlastní elektroinstalace CURT ideálním řešením. Vlastní kabelový svazek – také nazývaný T-konektor – je jednoduché elektrické zařízení plug-and-play, které se zapojuje do vašeho automobilového elektrického systému a poskytuje standardní, univerzální připojení kabeláže přívěsu. To se provádí pomocí dvou nebo více konektorů specifických pro vozidlo, kompatibilních s OEM, které se zapojují do sestavy zadního světla, čímž se eliminuje potřeba řezání, spojování a pájení během instalace. Vlastní kabelové svazky jsou vyráběny pro konkrétní vozidlo, a přestože nejsou k dispozici pro všechna vozidla, nabízejí jeden z nejrychlejších, nejjednodušších a nejbezpečnějších způsobů, jak zapojit vozidlo pro tažení. Tento konkrétní zásuvný kabelový svazek poskytuje 4cestnou zásuvku plochého konektoru a je navržen jako vlastní kabelový svazek vhodný pro určité roky Fordu Escape (pro ověření kompatibility vašeho vozidla viz informace o aplikaci). Dodává se se všemi nezbytnými elektroinstalačními součástmi pro vytvoření spolehlivého připojení kabeláže přívěsu, stejně jako s prachovým krytem, ​​který udržuje konektor čistý, když se nepoužívá. Máte na mysli obrázek svého dalšího cíle – možná je to loď přistávající na vašem oblíbeném rybářském místě, možná je to kemp, který má výhled na jedno z mistrovských děl přírody, nebo možná je to další velké staveniště. Proměnit tento obrázek ve skutečnost však vyžaduje více než pouhé snění. Vyžaduje pevné připojení a správné množství energie. Zakázková elektroinstalace CURT je vyrobena pomocí některé z nejsofistikovanějších technologií v oboru a je navržena tak, aby se snadno instalovala, což vám poskytuje dlouhotrvající elektrické připojení pro nastavení tažného zařízení.

KRYT PROTI PRACHU. Pro podporu dlouhodobého používání a odolnosti vůči povětrnostním vlivům je tento 4pólový kabelový svazek pro osvětlení přívěsu dodáván s pryžovým protiprachovým krytem. Když se nepoužívá, snadno se hodí na 4cestný plochý konektor a chrání jej před vnějšími vlivy. SPOLEHLIVÝ VÝKON. Tento 4cestný kabelový svazek přívěsu je vyroben technologií povrchové montáže. Tento typ obvodů generuje méně tepla, optimální intenzitu světla a trvanlivý výkon. SPECIFICKÉ VOZIDLO. Tento kabelový svazek vozidla-návěs pro trh s náhradními díly je navržen pro vybrané roky Fordu Escape. STANDARDNÍ KONEKTOR. Tuto zásuvnou 4-plochou kabeláž přívěsu lze použít k připojení koncových světel přívěsu, brzdových světel a směrových světel. 4cestná kabeláž osvětlení přívěsu je oblíbená u různých přívěsů a přidává všestranné možnosti tažení vašeho vozidla. SNADNÁ INSTALACE. Žádné řezání! Žádné spojování! Tato sada kabelového svazku přívěsu se zapojuje do stávající tovární kabeláže na vašem vozidle a vybavuje ji standardním zadním 4kolíkovým konektorem kabeláže přívěsu pro připojení a tažení přívěsu.
Brand CURT
Brand ‎CURT
Connector Type Plug-in
Country of Origin ‎Mexico
Customer Reviews 4.5 4.5 out of 5 stars 254 ratings 4.5 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 6 x 3 inches
Item model number ‎56320
Item Weight 1.72 Pounds
Item Weight ‎1.72 pounds
Manufacturer ‎CURT
Manufacturer Part Number ‎56320
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56320
Product Dimensions ‎9 x 6 x 3 inches

3.5

13 Review
5 Star
76
4 Star
11
3 Star
4
2 Star
1
1 Star
8

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: phillip scarboro
Great easy installation
This product is a plug and play interface with the factory wiring. All you have to do is run a power wire to the battery from the back.
Scritto da: Larry
Works as it should, a lot of plastic has to be removed
The unit works great, but a lot of plastic and spare tire has to be removed
Scritto da: Bangster
Very infrequent towing of a Horrible Fright folding trailer that I upgraded to the LED ...
This one actually fits my 2017 Escape, I should have done more due diligence and not listened to Amazons "this will fit your car" for the harness for the 2013-2016 Escape. I did cut it up so I didn't have to make hack and make giant holes for the entire connector to pass through to the tail lights, and I didn't run the wire to the front to the battery, but I utilized a fuse tap and the cargo area fuse panel, 5 feet of wire versus 20 running under the car. Everything was long enough, only part of the instructions I read was what side the single green wire went to. I was going to reverse engineer it to mount the box on the passenger side close to the power, but decided I might be pushing my luck. I chose to keep the 4 pin end bundled up in the spare tire well and will feed it out the lift gate bottom/gasket when connecting to a trailer. Tested it with a small light tester and with the trailer itself, everything works, doesn't cause any issues with the vehicle's lights. Very infrequent towing of a Horrible Fright folding trailer that I upgraded to the LED lights, but I am sure this would have driven the incandescent lights as well. Might try that out if I get a cargo hauler and feel it might cover the tail lights, toss the shipped lights on it. Easy to install, like that it is inside the vehicle and not mounted outside and wires ran outside, but were I live it really wouldn't matter.
Scritto da: GARY L GOLDSMITH
Works great.
Not really that hard to install. Took me maybe 2 hours taking my time. I'm still not sure why the vendor opposes connecting the power source wire to the extra fuse panel in the rear of a 2018 Ford Escape Titanium ! It has constant power ! Using something like the AutoEC ATO ATC 21AMP Add-A-Circuit Fuse Holder Fuse Box Tap Kit would work fine. But since they don't support that Option I ran it to the battery which was pretty simple on the Escape hiding it above the drivers skid pan . I will also say I could not get the harness end inside the CURT 58300 Vehicle-Side Trailer Wiring Harness Mounting Bracket for 4-Way Flat. I tried everything
Scritto da: Ron
Easy install
Ford installed there version at the dealership when first owner purchased. After we bought car used, we later found out that brake lights didn't work for towing. Purchased this unit and installed the correct way. Works perfect.
Scritto da: Jake W ia
Fast "Plug & Play" Install. Under 1hr and done.
Installed by myself on my 2018 Ford Escape (SEL) Perfect!!! Install took just under 1hr with the right tools and a general idea of where to run and hide the wires. Direct Plug and Play set up with only wiring work needed was positive terminal hook up. Saved a couple hours compared to a universal wiring kit where you'd have to hunt down each wire coming off your tail light to splice into. Not to mention you'd have to alter factory wiring.. with this kit, you do not alter any factory wiring at all! All my trailer lights work perfectly when plugged into this harness. And I couldn't beat the Amazon Warehouse Pricing!!!
Scritto da: Benjamin Sutton
Perfect fit for 2017 Ford Escape Titanium
Had some issues finding a wiring harness that would fit my 2017 Ford Escape Titanium. After some research I found this product along with installation instructions on eTrailer's Youtube. It fits just as advertised! As for the product itself, I was impressed with how easy it was to install, even if it didn't come with the best instructions (just watch the video instead!). I drove over 600 miles this weekend hauling a small trailer with LED lights and had no issues. If you are looking for a trailer wiring harness for your 2017 Ford Escape Titanium, this is what you need!
Scritto da: Kathryn S
Mostly good
Does NOT work with the Hopkins 48595 mounting bracket as another review mentioned. The shape is completely different. I'm mostly happy with this wiring harness for my 2017 Ford Escape Titanium. I was able to get all of it installed myself. I ran the power wire to an unused fuse in the cargo area fuse box. My only negative is that the instructions have no mention of the fact that my Escape has some sort of part in the way of where it says to mount the black box. I had to zip tie the box beneath that same metal piece.
Scritto da: Greg B.
Returned defective.
Got a defective one, 1 of the circuits didn't work had to return. Refund no problem. Got a second one works great have used Curt products on other vehicles with no problem.
Scritto da: Customer
Positive purchase.
Ease of installation and worked as advertised.
Scritto da: vern
Worked perfectly
Easy to install, good instructions, worked as described
Scritto da: TaylorMartine
Included instructions are bad
I was able to install this easily after looking up a video with much better instructions.
Scritto da: waveyq
Worked for my car
followed instruction to install it. not easy one but worked finally.

Související produkty

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array