Curt Manufacturing 56009 Vlastní 4kolíkový kabelový svazek přívěsu na straně vozidla, pasuje na vybraný Jeep Grand Cherokee

Brand:Curt Manufacturing

3.7/5

1662.93

Pokud vaše vozidlo není vybaveno elektroinstalací pro tažení přívěsu, je vlastní elektroinstalace CURT ideálním řešením. Vlastní kabelový svazek – také nazývaný T-konektor – je jednoduché elektrické zařízení plug-and-play, které se zapojuje do vašeho automobilového elektrického systému a poskytuje standardní, univerzální připojení kabeláže přívěsu. To se provádí pomocí dvou nebo více konektorů specifických pro vozidlo, kompatibilních s OEM, které se zapojují do sestavy zadního světla, čímž se eliminuje potřeba řezání, spojování a pájení během instalace. Vlastní kabelové svazky jsou vyráběny pro konkrétní vozidlo, a přestože nejsou k dispozici pro všechna vozidla, nabízejí jeden z nejrychlejších, nejjednodušších a nejbezpečnějších způsobů, jak zapojit vozidlo pro tažení. Tento konkrétní zásuvný kabelový svazek poskytuje 4cestnou zásuvku plochého konektoru a je navržen jako vlastní kabelový svazek pro určité roky Jeep Grand Cherokee (pro ověření kompatibility vašeho vozidla viz informace o aplikaci). Dodává se se všemi nezbytnými elektroinstalačními součástmi pro vytvoření spolehlivého připojení kabeláže přívěsu, stejně jako s prachovým krytem, ​​který udržuje konektor čistý, když se nepoužívá. Máte na mysli obrázek svého dalšího cíle – možná je to loď přistávající na vašem oblíbeném rybářském místě, možná je to kemp, který má výhled na jedno z mistrovských děl přírody, nebo možná je to další velké staveniště. Proměnit tento obrázek ve skutečnost však vyžaduje více než pouhé snění. Vyžaduje pevné připojení a správné množství energie. Zakázková elektroinstalace CURT je vyrobena pomocí některé z nejsofistikovanějších technologií v oboru a je navržena tak, aby se snadno instalovala, což vám poskytuje dlouhotrvající elektrické připojení pro nastavení tažného zařízení.

Vhodné pro vozy 2007-2013. Podporováno omezenou roční zárukou. Včetně krytu proti prachu, který udržuje konektor čistý, když se nepoužívá. 4cestný plochý výstup propojuje koncová světla, brzdová světla a směrová světla. Jednoduchý plug-and-play design eliminuje potřebu řezání nebo spojování. Zapojuje se do sestavy zadního světla vozidla a poskytuje 4cestnou plochou zásuvku.
Brand ‎Curt Manufacturing
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 567 ratings 4.6 out of 5 stars
Exterior ‎Machined
Is Discontinued By Manufacturer ‎No
Item model number ‎56009
Item Weight ‎8.8 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56009
Model ‎Custom Wiring
OEM Part Number ‎56009
Product Dimensions ‎9 x 4 x 2 inches

3.7

13 Review
5 Star
79
4 Star
12
3 Star
4
2 Star
1
1 Star
4

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: TimWells
Works good
Easy to install and works great.
Scritto da: Lake
You dont have to be smarter than a 5th grader.
The install videos on youtube show how easy it us to hook up a new electrical wiring harness for towing took me about 30 minutes to install.
Scritto da: Terrell Tate
Works as intended
It’s a plug and play system. A little hard to get the passenger side pulled through. It is nice they provide a self tapping screw for the ground.
Scritto da: Herb N
Only slight modification for 2013 Jeep Grand Cherokee Overland.
Not a dislike BUT the wires to the tail lights would not fit thru the frame holes without cutting parts of the seam. SO I simply cut the wires long enough to fished the wires down thru the available hole and connected them below the wheel well. Product works excellent and beats $100+ for dealer to reprogram the computer. Now to figure how to hook up the factory installed 4 and 7 receivers to this system. Not too hard.
Scritto da: Scott Bruce
Great product. Worth it.
Installed perfectly in 10 minutes
Scritto da: Vince Borrego
Easy install on 2012 Jeep Grand Cherokee
I bought this in addition to the Curt Manufacturing 13182 Class 3 2 inch receiver for my 2012 Jeep Grand Cherokee. Install was easy and only requires that you remove the rear tail lights to piggy back off the electrical connections for your trailer. What you end up with is a nice looking 4 pole trailer connector that zip ties nicely and out of the way. Same product they use at UHaul and if you're willing to spend 15 min installing it yourself you can save a bundle. With the 2011-2013 Jeep Grand Cherokees the only strange part was removing the tail lights. 2 plastic pins come out which you can use a flat screwdriver to help remove, then you have to pop out the tail light. At first you feel like you're going to break the tail light but don't worry it just requires a bit of pulling. No damage will happen as it snaps in place. Older style tail lights had all screws, whereas the new ones have 2 plastic snap/plugs and then snap into place. I did a google search for '2012 Jeep Grand Cherokee tail light removal" and found several how to's on the Jeep forums and even a youtube video walking you through the process. Would recommend this purchase for those looking for an aftermarket trailer hitch and wiring.
Scritto da: Javier
Excelente
Muy bueno
Scritto da: andrew j tobias
plug in and no cutting of wires
once you unplug the plug its all plug in and run the wire down and thru the brackets holding the bumper and back up on other light and one hooked up using the supplied self tap screw for the ground .you are set to use .they give you more then enough wire to run and the 4 way wire is long enough .worked out perfect and no worries about shorting system with cutting or soldering wires .
Scritto da: Victoria
Easy install keep 2007 gc
Worked perfectly on my Jeep 2007 grand Cherokee. Easy install less than 10 minutes and I have very little to no automotive knowledge. Just have a power drill as it doesn’t say on the instructions that you need to drill the white ground wire to the metal part of the car, but other than that. Easy as pie, works great, and great price when compared to shops and installation prices.
Scritto da: stuart horan
CURT 56009 Custom Wiring Harness
very easy to install, perfect instructions, took about all of 30 minutes and it was all done .all works perfectly highly recommended
Scritto da: Denis
its was really easy to install
no mess with having to solder and cut wires,,its so easy just push in the clips on the wire harness together behind each tail light and than lead the harness down to the hitch, pug in the trailer lights ,,,,
Scritto da: Maziar M.
Good stuff
Perfect fit
Scritto da: caine
Easily installed
Very simple to install .

Související produkty

hot

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array