Danco 10062P Univerzální nárazníky na záchodové sedátko, 2 balení, bílé, 2 kusy

Name: Danco 10062P Univerzální nárazníky na záchodové sedátko, 2 balení, bílé, 2 kusy
Brand: Danco
SKU: 0037155028153
Price: 627.60 CZK
Availability: InStock

Brand:Danco

2.8/5

Kč
627.60

Tyto nárazníky na záchodové prkénko nabízejí snadnou alternativu k výměně celého záchodového prkénka. Součástí jsou (4) kulaté nárazníky na záchodové prkénko a (4) podlouhlé nárazníky na záchodové prkénko. Vyznačují se robustní pryžovou konstrukcí, která poskytuje pevnost a odolnost, která pomáhá chránit a chránit vaše záchodové prkénko. Tyto náhradní podložky do nárazníků jsou schopny nahradit zaskakovací, šroubovací a připínací nárazníky víka záchodového sedátka. Tyto univerzální nárazníky na záchodové prkénko fungují s většinou značek a modelů záchodových prkýnek, ale nejlépe fungují se záchodovým prkýnkem, které má hladký povrch. Tyto náhradní nárazníky jsou ideální pro opravu záchodového prkénka. Objednejte si svůj ještě dnes!

Nejsou k dispozici žádné jednotky

EAN: 0037155028153

Kategorie Nástroje a domácí potřeby, Kuchyňské a koupelnové vybavení, Svítidla do koupelen, Toalety a WC díly, Sedátka na toalety,

SNADNÉ POUŽITÍ: Důkladně očistěte kroužky záchodového prkénka a udržujte je čisté a suché, odlepte samolepicí zadní část nárazníku záchodového prkénka a nalepte jej na kroužky záchodového prkénka, silně zatlačte, aby se pevně přilepilo (nepoužívejte po dobu 10 minut po instalaci). UNIVERZÁLNÍ DESIGN: Univerzální design vhodný pro většinu značek a modelů záchodových sedátek (nejlépe funguje se záchodovým sedátkem, které má hladký povrch). OBSAHUJE: (4) kulaté nárazníky záchodových sedátek (2-1/4 palce dlouhé a 3/4 palce široké s tloušťkou/výškou 1/2 palce) a (4) podlouhlé nárazníky nárazníky záchodových sedátek (3/4 palce vnější průměr s tloušťkou/výškou 1/2 palce). EXTRA odpružení: Nahrazuje zacvakávací, šroubovací a přichycovací nárazníky záchodového sedátka a pryžovou konstrukci s tyčí s bílou povrchovou úpravou ladí s většinou stávajícího vybavení toalet a koupelny. LEPICÍ PODLOŽKY NA MÍRU: Připevňuje se k záchodovému prkénku pomocí odolných lepicích podložek na míru, které pomáhají chránit a chránit vaše záchodové prkénko.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Danco
Brand	‎Danco
Color	White
Color	‎White
Customer Reviews	3.8 3.8 out of 5 stars 4,773 ratings 3.8 out of 5 stars
Included Components	‎Toilet Seat Bumper Kit
Is Discontinued By Manufacturer	‎No
Item model number	‎10062P
Item Package Quantity	‎1
Item Weight	0.1 Pounds
Item Weight	‎0.1 Pounds
Item Weight	‎1.6 ounces
Manufacturer	‎Danco
Material	Rubber
Material	‎Rubber
Operation Mode	Manual
Operation Mode	‎Manual
Part Number	‎10062P
Product Dimensions	‎3 x 1 x 0.5 inches
Shape	Oval
Shape	‎Oval
Size	‎2 Pack
Style	Modern
Style	‎Modern
Warranty Description	‎Limited 1 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena^*

Vase hodnoceni

Scritto da: Linda J

Does the job!

They are working well on my very old (and blue Koehler) toilet seat. I opted to use a different adhesive instead of what came in the package, and they are holding up well. My suggestion to the manufacturer would be to include a small tube of E6000 adhesive, which does a great job.

Scritto da: Janet Prendergast

Don't last long

I had an old (about 30 yrs) wooden toilet seat and the original bumpers were cracking and falling off. The seat was in good shape and it's hard to find the good wooden ones anymore. So I saw these and figure this was the solution. Within a week they started falling off. One landed up getting flushed. I even tried to Gorilla Glue them on but that too failed. Maybe they will work better on the plastic seats but it didn't' hold on the wooden seat. I landed up replacing the seat with a plastic one.

Scritto da: Caroline Moniz

Works well

Way better then plastic bumpers that crack. These are of very good quality.

Scritto da: Tom

Just what I needed

My hard plastic toilet seat bumpers had cracked and come apart. These were just what I needed. After a couple of months they are holding up well. Very happy with them.

Scritto da: Vince Prybeck

Easy to install and work well, if they stay glued.

Easy to install, but they may fall off after a few months requiring glue to re-install afterwards. I've already done 2 of the 4 I got, but they stay after they are re-glued so far.

Scritto da: Kathleen

Not white

Says white....not, it is an off white.

Scritto da: adumas18

Doesn't stick

The tape it comes with does not stick at all to the toilet lid or even the product itself. I had to use wall hanging double sided tape I had to get these to stick. The actual product is sturdy but the tape is useless.

Scritto da: Just Joe

Did not use. Too small to match previous bumpers.

Not used.

Scritto da: Luc Labelle

They work great but, could have better adhesion from 3M.

They work great but, they could have better adhesion from the 3M double sided tape that comes with it . I had a hard time making it stick and finally they did when I installed them under the seat and sat down on it to apply pressure on them and they finally glued on correctly and are still holding great . I would have preferred screwed on than these but, the rubbers are of really good quality , it's just the double sided tape for me that's not quite the right one for the job , I think . I'm used to double sided tape for car moldings and it sticks a lot more than these ones but like I said , they did the job . Thank you .

Scritto da: Patrick

Only diamonds are forever, not these toilet seat bumpers.

Got these bumpers so that it would fill the gap between my toilet seat and rim caused by bidet installation. They really did not last long at all. They stick on for a bit then you find later they have fallen in the toilet. They don' t stay where they are supposed to. Perhaps its because I did not use crazy glue on them like some other people have suggested. Or even use crazy clue then hold in place with binder clips over night. This could help. At first I had them on the underside of the toilet seat itself. This seemed to work for a while then they would fall off. Eventually I tried sticking them to the toilet so that my weight would constantly keep them sticky and in place. I'm not sure how but they still somehow end up falling out into your toilet at some point. I would definitely agree that the stickiness that comes with these is not a long lasting method. The other side of the coin is that they are in kind of a dirty area. Eventually they are going to get dirty and you are going to want to replace them anyway. Just a thought.

Scritto da: Amazon Customer

Don't stick

These bumpers would be great but the glue pads just do not stick. The first one fell off in less than a week and after three weeks they are all gone. This was after carefully cleaning both surfaces. Won't buy these again as I literally flushed my money down the toilet.

Scritto da: Dale

Satisfied

I was unable to locate the exact size I needed (3/8”) for my toilet seat bumpers anywhere, so had to shave these half inch ones down to work correctly. They work perfectly now.