EKLIND 54950 5 MM polštářová rukojeť, šestihranná T-rukojeť, imbusový klíč

Brand:Eklind Tool

3.8/5

637.83

EKLIND TOOL COMPANY je předním americkým výrobcem vysoce kvalitních imbusových klíčů průmyslové kvality, vyráběných s hrdostí v USA od roku 1950. EKLIND 54950 5 MM Cushion Grip imbusový klíč T-Handle T-Key splňuje nejpřísnější požadavky profesionálních mechaniků, živnostníky, kutily a fandy.

SPLŇUJE NEBO PŘEKRAČUJE VŠECHNY POUŽITELNÉ STANDARDY - Nástroje EKLIND splňují nebo překračují standardní předpisy stanovené v ANSI, ASME, RoHS, REACH, CA Prop 65 a Dodd-Frank Conflict Minerals Legislativa. IDENTIFIKUJTE SVÉ NÁSTROJE – Metrické velikosti jsou barevně označeny modrou barvou, takže můžete rychle sáhnout po správném nástroji. EKLIND CUSHION GRIP T-KEY-Klíče, které mají delší hřídele pro větší dosah a pákový efekt, hladké vinylové rukojeti jsou pohodlné a odolné proti uklouznutí, pěkně se stohují a jsou uspořádány do pouzdra pro kompaktní skladování, dokonce i ve vaší krabici na nářadí. EKLIND ŠESTIHRÁTOVÝ KLÍČ S T-HANDLE- S delšími hřídeli klíčů získáte extra dosah a extra pákový efekt. OPTIMÁLNÍ PEVNOST- Tyto nástroje EKLIND jsou vyrobeny z legované oceli EKLIND, která je tepelně zpracována, kalena a temperována pro optimální pevnost, krouticí moment a tažnost pro bezpečnost a potažena nerezovým povrchem. Šestihranné klíče EKLIND (inbusové klíče) se používají k pohonu vnitřních šroubů s vnitřním šestihranem (inbusem). Délka hřídele = 9 palců, šířka rukojeti = 4 palce. VYROBENO V AMERICE – Vysoce kvalitní profesionální nástroje průmyslové třídy vyrobené v U.S.A.
Brand Eklind Tool
Color Multi
Country of Origin USA
Department Unisex-Adult
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 1 x 1 x 1 inches
Item model number 54950
Item Weight 1.6 Ounces
Manufacturer Eklind
Material Blend
Product Dimensions 1 x 1 x 1 inches; 1.6 Ounces

3.8

11 Review
5 Star
80
4 Star
13
3 Star
5
2 Star
1
1 Star
1

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: Grillmantom
Perfect if you need it
Got this for my bikes disk breaks worjs just fine
Scritto da: Brent
It’s an allen head
It fit my 5mm allen head!!
Scritto da: Joe-bob product tester
Durable works great on Rhino Rack Vortex bar holders.
Works great on Rhino Rack cross bars. I cranked very hard on these "farmer tightening" some bolts and I didn't see any wear or twisting on this tool. Very durable. Much cheaper than buying the replacement Rhino Rack tool, and this one is much longer as well.
Scritto da: Nathaniel Allen
Dead simple, l-o-n-g hex wrench, cheap handle...
Gosh, my title says it all. I searched out and bought this particular hex wrench to ease the installation and removal of a Yakima Railgrab-based roof rack on my car. Standard length 'L' 5mm interfere with the cross bars when I turn them; the 9-inch shank on this one clears the ends of the crossbars so I can spin the handle freely. For what it is -- something that will live in my trunk and see use only infrequently -- it's petty to note the cheesy handle. But because the "cush grip" is mentioned in the product title, I'll just add that I have hex wrenches in my shop with much more comfortable grips -- some overmolded plastic, others simply plastic-dipped bar stock. This, by comparison, is only marginally nicer than your standard 'L' key. But you've already probably figured out as much by looking at the product photo. And in all actuality, for my occasional purposes, it doesn't much affect the use of this tool one way other the other. If I had it at my bike work station where it would be in use constantly, that would be a different story.
Scritto da: Dallas B.
Works like a champ for Yakima roof towers…
So I lost the original wrench for my roof towers. This is such a nice replacement. May be the best five bucks I ever spent. Must have for Yakima rack owners. Very happy.
Scritto da: fishing fanatic
What I needed for a car job
This is what I needed to finish work on my transmission job for Nissan Versa Note. Just a bit flimsy but it had enough torque to get the nut loose and back in place.
Scritto da: Dion
Eklind T-handles are top-of-the-line.
These are made of good steel, so they don't round off too easily. If you do manage to round off the smaller ones (say, less than 4mm), they can be repaired by merely cutting off the lowest eighth inch with an abrasive wheel.
Scritto da: Mr.Dan
It’s a hex key, duh!
What do I like about this product? It’s a 5mm hex key, and that’s what I wanted, so I like it. I needed to change the wheels on my daughters scooter, and out of all the hex keys I already own I had zero. So I bought these. Do I really have to continue the story? Can’t you figure out the ending? Fine then. So, I got the hex keys, changed the wheels, and now I’m a hero. Amazon packaging was a mess (bubble envelope about 6 times too large), but I’m not including that in the start count; just passing on the info.
Scritto da: A.C.K
Great Tool
Gets in tight spots easily with the help of flash light easy to open n close hex bolts.
Scritto da: MAXIM LUBINSKI
Great product. Good price.
Great product. Good price.
Scritto da: MR GRAHAM HARLAND
Five Stars
long reach makes the job quicker, increases the torque and gets to less accessible heads

Související produkty

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array