Extreme Max 5600.3139 ATV naviják pro Kawasaki Brute Force

Brand:‎Extreme Max

3.7/5

2168.20

Důležitý je správný naviják a také držák, který s ním používáte. Správné uchycení navijáku maximalizuje výkon a bezpečnost navijáku a bezproblémově integruje váš naviják s vaší ATV. Tento držák na naviják Extreme Max se hodí pro vybrané čtyřkolky Kawasaki Brute Force (kompletní informace naleznete v tabulce uložení na obrázcích produktu). Naše držáky na navijáky jsou navrženy pro použití se všemi navijáky ATV/UTV od 2000 lb. do 3600 liber. s následujícími montážními vzory: Standardní 4 otvory (4,875 x 3) a Standardní 2 otvory. Držák má ocelovou konstrukci s práškovým nástřikem pro trvalý výkon a ochranu před rzí a poškozením. Navrženo pro snadnou instalaci. Potřebujete nový naviják? Podívejte se na Extreme Max Bear Claw ATV / UTV Winch, dostupný v modelech 3100 lb. (5600.3072) a 3600 lb. (5600.3075). Extreme Max také nabízí kompatibilní lana a válečková vodítka, stejně jako kompletní řadu ATV kabelů, lan, háčků a dalšího příslušenství.

Nejsou k dispozici žádné jednotky
Dvouletá omezená záruka. Snadná instalace, kompletní návod v ceně. Ocelová konstrukce s práškovým nástřikem poskytuje trvalý výkon a ochranu před rzí a poškozením. Navrženo pro použití se všemi navijáky ATV/UTV od 2000 lb. do 3600 liber. s následujícími montážními vzory: Standardní 4 otvory (4,875 x 3) a Standardní 2 otvory. Držák na naviják ATV pro vybrané čtyřkolky Kawasaki Brute Force - Kompletní seznam najdete v tabulce fitů.
Brand ‎Extreme Max
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 341 ratings 4.6 out of 5 stars
Item model number ‎5600.3139
Item Weight ‎6.65 pounds
Manufacturer ‎Extreme Max
Manufacturer Part Number ‎5600.3139
Product Dimensions ‎14 x 12.5 x 2.5 inches

3.7

13 Review
5 Star
77
4 Star
14
3 Star
4
2 Star
2
1 Star
4

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: jennifer
Mounted right up !
Product mounted right on no need to modify
Scritto da: A Mike and His Lude
‘14 Brute Force Perfect Fit!!
I purchased this winch mount for my 2014 Brute and it fits perfect. The kit Supplied u-bolts and instructions to make this an easy install with no need to go buy any other parts. All though I did switch the u-bolts out for stainless but the supplied hardware was certainly sufficient for the job. My fairlead didn’t fit but that’s MY fault. This mount has a 4 7/8” fairlead hole mount ( holes measured on center) and my fairlead was to small. 4 7/8” is pretty standard so I don’t know why mine was smaller. Anyway, it worked out perfectly ! Thanks
Scritto da: R. S. Jones
Fits 2005 Brute Force 750 just fine
The mounting plate sits in the required space with all the proper angles. I guess the bargain comes from the generic hardware. They are U-bolts available from any hardware store. They fit the frame pretty tight and scratched up the frame paint pretty bad. A possible rust location is now there for sure. The brute force doesn't have pure vertical frame bars, thus I twisted the second U-bolt and it fit better.
Scritto da: Bill U.
Rear u bolt holes were drilled ofse the wrong way. No big deal if you have any experience.
Fit perfectly on my 2012 kawasaki brute force 750.Had to modify the rear mounting holes a bit but no big deal.The rear u bolts were also a little small but I got them on. Great for the money
Scritto da: Paul
Easy install
Great fit for the brute force 750 however, front platefor the cable angles down. I would rather it face straight.
Scritto da: Mike Hastings
Great product
This winch mount installed without removing anything and was super ez. The hardware was all there and worked perfectly. This was put on my new 2022 bruteforce.
Scritto da: zookie
ggod fit
works well, seems strong
Scritto da: Jomama
Fit perfect, extremely cheap but one u bolt was bad
Low price good fit just had to replace one u bolt
Scritto da: Kyle riley
Price is right
The plate is good the front u-bolts fit perfect the rear was a nightmare. It took about a half hour to shape the u-bolts in a vice to make them work and the holes were powder coat to heavy for them to fit through. Plate is good hardware is meant to go in your bolt bin
Scritto da: Amazon Customer
Good for the money
Was very good for the money and came with everything described and fit very good !!
Scritto da: RP
High quality mounting plate
The mount itself is perfect, it fit my 2016 brute force 750 perfect. Makes for a nice clean job. Supplied u-bolts aren't great so I used my own. I'm happy with the purchase.
Scritto da: Sophie
Well made
Quality product , easy install and fits perfectly on my 2021 brute force 750 .
Scritto da: Corey
Great buy!
Fits perfect. Don’t bother messing around with the universal that comes with winches.

Související produkty

hot
hot
Ranch Hand WPC115BL1 Talíř navijáku
0.1/5

Kč 9545.66

Ranch Hand WPC115BL1 Talíř navijáku
0.1/5

Kč 9545.66

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array