GE WB19K10044 Originální OEM ventil a regulátor tlaku pro plynový sporák/sporák/trouby GE

Brand:GE

3.1/5

4256.68

Opravte svůj spotřebič s důvěrou, když si vyberete originální díly a příslušenství GE Appliances. Vysoce kvalitní GE Appliances OEM WB19K10044 Ventil a regulátor tlaku dosahu/sporáku/trouby jsou vyrobeny z prvotřídních materiálů pro dlouhou životnost a přesné přizpůsobení, při instalaci této součásti se řiďte pokyny v uživatelské příručce. GE Appliances WB19K10044 Ventil a regulátor tlaku sporáku a trouby se také nazývá sestava regulátoru tlaku plynu a bezpečnostního ventilu trouby. Náhradní ventil a regulátor tlaku GE Appliances řídí přívod plynu k hořákům trouby. Regulátor ventilu a tlaku GE Appliances WB19K10044 je originální díl OEM (Original Equipment Manufacturer) navržený a zkonstruovaný podle přesných specifikací.

Opravte svůj spotřebič s důvěrou, když si vyberete originální díly a příslušenství GE Appliances. Vysoce kvalitní GE Appliances OEM WB19K10044 Ventil a regulátor tlaku dosahu/sporáku/trouby jsou vyrobeny z prvotřídních materiálů pro dlouhou životnost a přesné přizpůsobení, při instalaci této součásti se řiďte pokyny v uživatelské příručce. GE Appliances WB19K10044 Ventil a regulátor tlaku sporáku a trouby se také nazývá sestava regulátoru tlaku plynu a bezpečnostního ventilu trouby. Náhradní ventil a regulátor tlaku GE Appliances řídí přívod plynu k hořákům trouby. Regulátor ventilu a tlaku GE Appliances WB19K10044 je originální díl OEM (Original Equipment Manufacturer) navržený a zkonstruovaný podle přesných specifikací.
Batteries Included? ‎No
Batteries Required? ‎No
Customer Reviews 4.1 4.1 out of 5 stars 53 ratings 4.1 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎WB19K10044
Item Package Quantity ‎1
Item Weight ‎1.1 pounds
Manufacturer ‎General Electric
Part Number ‎WB19K10044
Product Dimensions ‎8 x 6 x 3 inches

3.1

9 Review
5 Star
57
4 Star
20
3 Star
7
2 Star
4
1 Star
12

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: jim brinkley
One may have to adjust the angle between the regulator and gas valve in order to mount the parts.
My wife would complain about smelling gas when the stove was set to preheat. I installed the new unit and eliminated this problem. The oven heats to the set temperature faster now.
Scritto da: Walter Clayton III
Quality pays off!
I installed this myself very carefully along with a new ignitor. After inverting a tiny valve to adapt it to liquid propane (from natural gas) it works flawlessly. Gas flow is perfect and my oven, which was so slow to heat up, now reaches the desired temperature in mere minutes. Excellent product.
Scritto da: Kent macdonald
The item was used but appeared new
Saved me replacing the stove as my repair man suggested. Good price but exchange rate to CAD hurt a bit
Scritto da: Ms.Nell
Well I received this part and it worked well at ...
Well I received this part and it worked well at first, all the burners came on, however after a month or two, the over failed to ignite, I'm wondering if this part can be returned for a replacement, or if there is something I need to do, to jump start the process of the over turning on. when I press the bake button, then it tells me to press start, then the preheart button appears, but it doesnt start. can I get some help in any way please.
Scritto da: odecca gibson
Genuine GE range part
Needed to replace the pressure regulator in my GE oven. The part was delivered quickly, although the box it was delivered in was monstrously big given the size of the part itself. My oven is now working again so I am happy.
Scritto da: Alvin R.
Regulator not at correct psi setting
The product was a correct fit and was easy to install. Burners worked decent, but the burner flame was lower than the original. The oven was used for the first time some 6 weeks after installing, but it produced a large blazing flame. This created tremdous soot in the oven and a hazardous flame level. Evidently the regulator is sending too much gas to the oven burner,but too little to the stove top. The safety valve most likely is defective, but at this point way pass the return deadline. An $80 paper weight.
Scritto da: Larry Besant
Item will work
Stove,worked great
Scritto da: Curtis Vest
Three Stars
Still had to put the orfice in correct. Because the factory installed it wrong
Scritto da: Krystal
Didn’t work
Installed this in our oven and the valve never opened to send the propane through to the burner. Could it be a faulty valve?

Související produkty

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array