Nastavitelný doraz a měrka drátu pro Katapult Odizolovačka Klein Tools 11081

Brand:Klein Tools

3.3/5

621.64

Pro použití s ​​odizolovači/řezačkami drátu Katapult (kat. č. 11063W a 11063MET). Katapult Wire Stripper Klein Tools je vybaven pohodlnou odizolovací hlavou, která profesionálům umožňuje snadné uchopení a odizolování pouhým stisknutím rukojeti. Vyrobeno z lité slitiny s vysoce odolným povrchem Ecoat pro odolnost proti korozi a trvanlivost. Nastavitelná zarážka/měřidlo drátu udržuje nástroj jako nový. Již více než 160 let vyrábí Klein Tools ruční nářadí prvotřídní kvality, profesionální kvality, které poskytuje výkon, odolnost a přesnost potřebnou ke správnému provedení práce. Naše rodina inženýrů, dělníků a řemeslníků nadále vkládá šest generací odborných znalostí do každého nástroje, který vytváříme, a to používáním pouze těch nejkvalitnějších materiálů, špičkového zpracování a udržováním výroby tak blízko, jak jen to jde. Klein není jen název naší společnosti, je to také naše rodinné jméno. A protože jsme americká společnost, která je rodinná a vedená rodinou, víte, že se můžete spolehnout, že tu zítra budeme. Klein Tools nevyrábí jen skvělé produkty, vyrábíme skvělé produkty, které splňují požadavky profesionálů, kteří je používají každý den... Od roku 1857.

Povrchová úprava Ecoat pro ochranu proti korozi. Náhradní díl, aby nástroje fungovaly jako nové. Jemně drží kabel na místě pro přesné řezání. Pomáhá snadno řezat a odizolovat drát. Pro použití s ​​odizolovači/řezačkami drátu Katapult (kat. č. 11063W a 11063MET).
Batteries Included? ‎No
Batteries Required? ‎No
Brand Klein Tools
Country of Origin ‎Taiwan
Customer Reviews 4.2 4.2 out of 5 stars 52 ratings 4.2 out of 5 stars
Grip Type Ergonomic
Included Components ‎11081
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 3 x 3 x 3 inches
Item model number ‎11081
Item Package Quantity ‎1
Item Weight 0.16 Ounces
Item Weight ‎0.16 ounces
Manufacturer ‎Klein Tools
Material Metal
Material ‎Metal
Part Number ‎11081
Product Dimensions ‎3 x 3 x 3 inches

3.3

12 Review
5 Star
56
4 Star
29
3 Star
3
2 Star
5
1 Star
7

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: Ross W.
Makes life really easy
Adding the stop to the wire stripper makes it very easy when working with GFCI's or using the new push-in wired nuts that require a specific depth. With traditional wire nuts it makes getting everything stripped to a consistent depth very easy. Same with connecting to outlets screws.
Scritto da: Jesu
Quality part by Klein
Quality is as good as it gets, knurling is good quality, as is the plastic used. The clear plastic is quite thick and should hold up well.
Scritto da: lesvance
Great addition to the Katapult wire stripper
I've gone through my entire life stripping 12ga wire with a jack knife. had to wire a new stable for some friends of mine. Getting the strip-length right was a piece of cake. But you still have to be careful about nicking the conductor.
Scritto da: Jordan Simpson
Klein Tools should include this when buying Katapult.
I have been using Klein Katapult since the year 2011. Only recently I learned this depth gauge has always been available. Don't know how I got by without it. Magnifies seeing the wire too while placing in correct strip hole.Overall build quality could be better but I like it anyhow. Shipped and delivered on time.
Scritto da: Peter H
Ludicrously overpriced, poorly designed
The Klein Katapult should include a depth stop as standard. This is a ridiculous amount of money for two small screws and a piece of plastic. The stop is not well designed - it is obviously a kluge that was added on later. The plastic part rotates freely on the rod, so you have to make sure it is square as you tighten the lock screw. The stop goes all the way down to zero strip length, which is obviously useless; as a result, you have reverse the stop on the rod to get longer strip lengths. There is no way to flip the stop out of the way for a one-off strip of an odd length. The rather crude built-in (and therefore free) stop on the Irwin stripper is better. No instructions are provided; you have to deduce that you must remove one of the existing screws from the Katapult and replace it with the rod.
Scritto da: Kindle Customer
Mine cracked and became useless after a few resets to different lengths
The screw needs to be tightened very tight for the stop to stay in place. Otherwise the stop slides slightly with each use of the stripper and the adjustment is lost. Mine cracked and became useless after a few resets to different lengths. This should have been a metal part instead of plastic.
Scritto da: Scott L.
Great idea, but the attachment screw not the correct size
I love my stripper. And I love the idea of this wire stop gauge. However the attachment screw is not the correct size and after some use, the screw simply strips out of the tool. The threads inside the tool itself are fine, but the attachment screw threads will not hold this wire stop gauge. It is very frustrating. I called Klein to see if they will replace or even just fix the new parts that they make. We'll see what they do. Again, love the tool and idea, but the execution is quite poor.
Scritto da: mojobill
A little flimsey
A little flimsey, plastic cracked 1st week. Should be all metal maybe?
Scritto da: Felipe Reding
Muy útil (Compra varios...)
Muy útil para cuando tienes que desforrar múltiples cables a una misma longitud; por ejemplo cuando vas a instalar todos los apagadores/contactos de una misma marca en una casa. El tope es de plástico, así que no esperes que soporte el abuso y el maltrato, de cualquier forma como no es un producto caro, recomiendo comprar varios de una sola vez para irlos reemplazando cuando se dañen. La relación costo/beneficio es muy buena
Scritto da: mekeni
Build a all metal parts just like the original design.
Very poor plastic material lasted only for few days a combination of metal and sub standard plastic parts is bad idea.
Scritto da: TDM
Improper screw size
Improper screw size
Scritto da: Amazon Customer
Five Stars
must have add-on for klien katapults

Související produkty

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array