Ochranné pouzdro Seahorse SE-300F s pěnovou oranžovou barvou

Brand:Seahorse

3.9/5

1975.11

Ochranná pouzdra Seahorse udrží vaše cenné vybavení v bezpečí. Zavřete a zajistěte pouzdra Seahorse, abyste automaticky bezpečně utěsnili své vybavení proti vodě, vzduchu a prachu. Je odolný s pěnou Acuform nebo přepážkami udrží váš fotoaparát, video nebo drahé zařízení v bezpečí před nárazem a poskytne bezpečnou a bezpečnou ochranu před živly. Vestavěné otvory pro visací zámek poskytují extra bezpečnost. Volitelné uzamykací západky Seahorse poskytují zvýšenou bezpečnost a chrání před zvědavými rukama.

Nejsou k dispozici žádné jednotky
Rozměry – (vnitřní): 9,50 x 7,35” x 4,10” palce (vnější) 10,78” x 9,75” x 4,83” / hmotnost 2,65 lb. USA Made - Vyrobeno v srdci jižní Kalifornie, tato pouzdra jsou vyráběna v USA; tím je zajištěna kontrola kvality a naše pouzdra splňují nejvyšší standardy výroby. Perfektní pro jakékoli použití - Naše pouzdra jsou vyrobena tak, aby ukládala a chránila cokoli. Funguje skvěle pro ochranu kamer, akčních kamer, mikrofonů, malých projektorů, elektroniky, telefonů. Pěna Pick and Puck – Naše přizpůsobitelná pěna Pick and Puck usnadňuje vytvoření perfektní vložky pro vaše vybavení. Jednoduše vytáhněte předem rýhovanou pěnu a vytvořte požadovaný tvar pro cokoliv, co v ní plánujete uložit. Heavy Duty & Waterproof - Toto pouzdro je vyrobeno z vysoce kvalitního polypropylenu s vysokou hustotou, takže to dá pořádně zabrat. Odolný proti nárazu, nárazu, prachu a IP67 vodotěsný. Těsnící O-kroužek a západky pro vyrovnání tlaku zajišťují, že se do pouzdra při zavření a západce nedostane žádná voda ani prach. Importováno. pěna.
Brand Seahorse
Brand Name ‎Seahorse
Closure Type Toggle
Color Orange
Color ‎Orange
Customer Reviews 4.8 4.8 out of 5 stars 716 ratings 4.8 out of 5 stars
Included Components ‎Case with foam
Item Dimensions LxWxH ‎11.25 x 10.75 x 5.5 inches
Item Package Dimensions L x W x H ‎12 x 10.5 x 5.5 inches
Item Weight ‎2.76 Pounds
Manufacturer ‎Seahorse
Material Plastic
Material ‎Plastic
Model Name ‎Se300f,or
Model Year ‎2016
Package Weight ‎1.36 Kilograms
Part Number ‎SE300F,OR
Pattern Solid
Size ‎Small
Sport Type ‎Boating
Suggested Users ‎Unisex-adult
Warranty Description ‎Lifetime guarantee

3.9

13 Review
5 Star
90
4 Star
6
3 Star
1
2 Star
1
1 Star
1

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: GDF
As good if not better than the ridiculously expensive Pelican brand!
Solid, waterproof and with the option to lock, perfect for what I needed it for but had to send it back because the usable interior space is too small. Highly suggest measuring what you need then order the next size up, you would rather have more space required than less.
Scritto da: jordan
BMPCC4k worthy
I store a 25mm lens and my cam in there along with a few select accessories
Scritto da: W. Jeff Aiken III
Nice Waterproof Case Initially Missing the Lid O-Ring Seal
I have several Seahorse cases which I like much better than Pelican cases. The corners are not as rounded making it more efficient to pack and the plastic material is smoother making cleanup easier. The latches are also superior and much easier to open (good for me anyway- I've never had one pop open accidentally). I received the SE300 case recently and the o-ring seal in the lid was missing. I contacted customer service (got the number from the Seahorse website) and my call was answered immediately by a person! She got my name and address and sent out the o-ring without any hassle or me having to prove that I had purchased the case. I am very impressed with their friendly and efficient customer service and will certainly be a repeat customer knowing that I will be taken care of!
Scritto da: David
They had me at “made in USA”
Just received it and very happy with purchase. I’m going to be using this as a battery box for my inflatable dingy to house an 18ah 12 volt lithium battery. I will update with pictures and update in the future if I have any issues with this.
Scritto da: Gourd
Perfect air tight case for a high capacity battery.
This has stood up to getting kicked around the back hatch of my car, and has been just perfect for storing a large lithium jumper pack for jump starting vehicles. I bought it over a year ago, and it looks and functions just like the day I bought it and modded it for my items. The battery has enough capacity and chemical potential to do serious damage that I only feel safe carrying it around inside a fire bag inside a relatively air tight case. The pick and pull foam let me perfectly match the size of the bag and battery, along with the charging cable, and put in a nice storage slot for the manual. The air release valve under one latch is very handy, since I've had to crack the case open to get to the battery on days where the temperature dropped enough to make a vacuum seal. The price is low for what you get, and I would definitely use another box like this for a similar device. I'm going to get another one for packing a camera and other sensitive and easily crushed electronics when the pandemic is over and we can travel again.
Scritto da: Joel
Fits Canon T3i DSLR Body and Lenses
The build quality of this case appears to be up-to-par with Pelican as far as I can tell. I have a smaller Pelican 1120 case and they seem to be of similar quality. The foam feels a tad firmer and a little more difficult to pick and pluck, but not so much so that I really cared. As you can see in the photo, I was able to get a DSLR body (Canon T3i), 18-55mm lens, 24mm lens, extra battery, and a travel battery charger in this case (and close it without crushing anything). With the 24mm lens mounted, the case would still close but was really REALLY snug so I decided to unmount the lens. Yes, I could have gotten a slightly bigger case and kept the lens mounted, but my purpose in getting this was to have a smallish box that I could toss into a backpack or throw in the car or bring on a plane and be as compact as possible while holding all of the essentials... and more importantly, even a SLIGHTLY bigger case (even the Amazon version) would have cost me about 50 to 100 percent more depending on the selection. Overall, I'm quite happy with the purchase and would do it again.
Scritto da: S. Leiphart
Nice sturdy case with air pressure/vacuum release under one latch!
This thing is great. The foam in the bottom of the case is pre-perforated in small ~1/4 inch increments that can be easily separated by hand and any cut-out formation can be made. The down side of these pre-perforated form blanks is that if you make your hole slightly small for a tight fit, the small foam plugs/blank at the edges of the hole can catch of whatever you are inserting and start to rip loose. If you are careful when putting your protected items in an out of the formed holes, you should be okay. You just need to pay attention to that or your hole will start to lose its edges and get bigger as these pieces come loose. It is very well constructed and strong. One nice feature is the air release valve under the right-hand latch. These boxes really are air tight and if there is a difference in air pressure (even by the weather) there could be a vacuum in the case when it is closed which could make it difficult to open. When you unlatch the right latch, you can hear the air suck in or blow out the tiny hole that is opened when the latch is lifted. This equalized the air inside and outside the case and makes it easy to open.
Scritto da: Computer Graphics
Quality that matches or surpasses the big name brands
I was surprised by how similar the quality of the exterior was compared to brands like pelican, I was even more impressed by how much nicer the foam insert is. The pelican foam is a lot less dense and is easily damaged by anything sticky or with sharp edges. The seahorse foam was harder to tear apart to create the custom compartments I needed but using an x-acto knife I was able to easily remove the perforated cubes. It is a really nice quality product that is made in the USA and it shows.
Scritto da: David
Great Quality and Price
Very sturdy built, excellent quality. Fit my Milwaukee Laser Level perfectly.
Scritto da: eieio
buy this over pelican any day
right price, and quality is top. tip - the pick out cubes are as deep as the foam. If you only want them an inch deep EG., instead of trying to pluck an inch, leaving a rough edge below - use a bread knife to cut 1" off the top of the pad depth, then pluck out the now 1" deep cubes. When done you will have a nice smooth base under where you pulled em out. Bit of adhesive once all done to secure plucked top pad back to base if you want.
Scritto da: Dos
Solid case
Great case. Good value. Foam is easy to work with. And you only need one pad lock. Good purchase.
Scritto da: MM_YYC
Excellent! Far exceeds my expectations.
Bought to transport delicate recording microphones between studios. Fantastic case at a fair price. Pick apart foam is great quality. This far exceeds my expectations.
Scritto da: Philip
Exceptionally high quality, very good price-point
I have four of these for protecting various camera accessories, and I will happily buy more in the future as needed!

Související produkty

hot
Pouzdro Pelican 1640 černé s pěnou
3.7/5

Kč 26948.05

Pouzdro Pelican 1640 černé s pěnou
3.7/5

Kč 26948.05

hot
Pouzdro Pelican Ruck R60 (Tan)
3.8/5

Kč 3434.40

Pouzdro Pelican Ruck R60 (Tan)
3.8/5

Kč 3434.40

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array