0
0

Celkový:Kč 0.00

Viz košíkPřekontrolovat
LoginRegister
0

Celkový:Kč 0.00

Viz košíkPřekontrolovat
LoginRegister

Pond Armor SKU-GRAY-QT-R Non-Toxic Pond Shield Epoxidová barva, 1,5čtvrteční, šedá

Brand:Pond Armor

3.4/5

Kč
2806.96

Pond Shield je netoxická epoxidová vložka vyrobená v USA určená pro průmysl jezírek a vodních prvků. Používá se k voděodolnosti a utěsnění vodních prvků nebo jezírek s designovějším, formálnějším nebo přírodním vzhledem než pryžové vložky. Použití epoxidu Pond Shield znamená už žádné nevzhledné záhyby nebo záhyby. Navíc, na rozdíl od gumových vložek, je k dispozici jedenáct standardních barev - černá, šedá Charcoal, čokoládově hnědá, čirá, soutěžní modrá, delta modrá, šedá, mechově zelená, nebesky modrá, tan a bílá. Pond Shield se používá pro hydroizolaci strukturovaných povrchů nacházejících se ve vodních prvcích, jako jsou jezírka Koi, bazény, fontány, akvária, nádrže se slanou vodou, hydroponie, potoky, vodopády, odrazové bazény, mini jezírka, záchytné nádrže atd. Snadno se aplikuje a snadno pro udržení a pro většinu aplikací stačí pro správné krytí jediná vrstva. Kromě toho bude vaše jezírko prakticky bezúdržbové s povrchem, ze kterého lze snadno setřít řasy a který je bezpečný pro ryby (a další volně žijící zvířata) a p

Množství
Přidat do košíkuKup nyní

EAN: 0896772001105

Kategorie Terasa, trávník a zahrada, Venkovní dekorace, Vodní zahrady a jezírka, Vložky a těsnění pro jezírka,

Může být aplikován na jakýkoli konstruovaný povrch vyrobený ze dřeva, kovu nebo kamene, stejně jako většinu plastů a jiných nátěrů. Lze uvést do provozu již za 24 hodin. Samozákladové složení umožňuje spolehlivou přilnavost hotového povrchu, který se snadno udržuje. Speciálně navrženo pro použití pod vodou, aby bylo netoxické a bezpečné pro ryby a rostliny. Vodotěsné složení vhodné pro použití v široké škále klimatických prostředí od horka po podmínky mrazu/tání.
Age Range (Description) Adult
Brand Pond Armor
Color Gray
Color Code #a8acaf
Country of Origin USA
Coverage up to 60 square feet
Customer Reviews 4.4 4.4 out of 5 stars 220 ratings 4.4 out of 5 stars
Finish Type Gloss
Full Cure Time 24 Hours
Indoor/Outdoor Usage Outdoor
Is Discontinued By Manufacturer No
Is Waterproof True
Item Form Liquid
Item model number SKU-GRAY-QT-R
Item Volume 1.5 Quarts
Item Weight 0.01 ounces
Manufacturer Pond Armor
Package Information Can
Product Dimensions 11.5 x 5.5 x 5.5 inches
Size 48 Fl Oz
Size 48 Fl Oz (Pack of 1)
Special Feature Non Toxic
Specific Uses For Product Interior/Exterior
Unit Count 1.0 Count

3.4

12 Review
5 Star
66
4 Star
17
3 Star
9
2 Star
4
1 Star
4

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: Debbie reed
This epoxy worked great!
I picked the gray color , because the bird bath had a crack. We sealed it first and used this epoxy on the inside . Works very nice! Only two coats and good coverage. I will purchase this again. I think this birdbath will last for years now.
Scritto da: Kevork
Pond
This stuff is great for perfect seal of pond etc…It dries like glass and it says it’s safe for fish.For some reason it was staining clothes and skin. I don’t know if I did something wrong but no leaks it’s great . Please read the directions!!!! Mix it well if you don’t it will get very hot and harden on you. The owner of this product is wonderful and calls you back and his very helpful.
Scritto da: samuel
Works as advertised
When mixed as instructed it works well.
Scritto da: Carlgo
Quality
I used this with fiberglass cloth to repair cracks in a concrete pond. Easy to mix. I used cheap plastic cups to mix in and a fertilizer measuring spoon to measure it out. Used a cheap throw-away brush and that was fine. Did not use alcohol and it still lasted on a very hot day, but that was in the time it took to use up a cup or so at a time. Nice smooth finish, and I don't think the cracks will be an issue anymore. As we pond owners know, any product that has "pond" in its name is expensive.
Scritto da: Phil
We really enjoy our pond
I have a kidney-shaped pond in our back yard that has provided me with many hours of patching and cleaning activities throughout the years. I live in Michigan, and the winters will cause hairline cracks in the concrete walls. They usually appear in the same area. I've used Quickcrete and other patching compounds, including silicone. None of them are ideal. So, every Spring I clean the pond, search for cracks to repair, fill the pond....and watch it gradually drain away over the course of 3-4 days. We really enjoy our pond, so this year I decided to leave it drained so I could power wash it, and uncover any new cracks that needed repair. I found a major one that I think was the culprit. Located at the floor and wall junction, this was a deep crack that was repaired with Quickcrete, a fast setting concrete mixture. I used a wire brush on a drill to roughen the entire pond surface. I then etched the surface of the pond with a muriatic acid solution. I found Pond Armor on Amazon, and decided to give it a try. It is rather expensive (explains the 1-star deduction). But it offered a nice assortment of colors. I chose gray. I followed the instructions to a tee, using the instructions for rough surfaces. See first photo for the before shot. I bought the 1 quart kit, which doesn't state the coverage on Amazon. Lucky for me, the coverage rate is 60 sq ft, which is the area of our pond. I decided to split the paint in 1-half portions, so I could apply 2 coats to the pond. Well, that plan did not work, because, like many others here, the paint started to really thicken after about 20 minutes. It was in the upper 70s when I applied this (in the shade), and that may have been a factor. The directions state to apply just enough for a 30 minute session. So, I used the first half of the paint, but was unable to put any paint on about half of the pond. I mixed the 2nd half and added a bit more alcohol to reduce it. Again, I only got about 20 minutes use, but I was able to finish coating the entire interior. See the 2nd photo. I waited overnight for the paint to cure. We filled the pond today, and if I find any issues I will update this review. The coating dries to a shiny, hard, yet rubbery film; I don't see how any water could seep through this coating.I plan to patch any hairline cracks that may develop over the winter months with silicone sealant.
Scritto da: Michelle H.
This project has been a fail
The epoxy has shriveled up and been flaking. I think it got too cold. If you think you mixed it enough. Mix it more. I wish there were easier products for lining ponds.
Scritto da: Sean (Electrican)
Timeline of resurfacing my 16 year old pond, great product!
I built this pond in 2004. I painted it with a concrete water resistant paint not a waterproof paint. And it leaked, of course. I had a guy put a thin-set waterproof sealer on it and it worked for about 13 years before it started to peel from the top, crack and then started leaking through the brick. (He didn't sand or prepare the paint that was already there, that I know of). I knew this epoxy would be the best stuff to use but I also knew I needed to work hard in preparing the surface. As you can see, 4 pictures are just IN PREPARING THE SURFACE... chiseling, diamond grinding, grinding, filling (with waterweld), sanding the filling and acid washing. I had to remove the thin-set and the concrete paint and get it down to the cinder block concrete. It has the perfect rough surface for this epoxy to adhere. READ THE DIRECTIONS FIRST!!! I used: a Dewalt hammer chisel, a 4" diamond flat leveling grinder, and a reg 4.5" concrete disk grinder. I used a roller: 6" Best 1/4" nap white woven. DON'T use foam rollers. 2 quart throw away containers and used the 2 cup/ 1 cup recipe at a time because you need to go back and re-roll spots and this stuff dries in 20-30mins. I put 2 coats and it filled the cinder block surface and joints. It drys rubbery but in days it gets harder even under the water. (I waited the 24hr plus 6 hrs before I added water). As you can see the gray looks blue in water. And that's it. I hope this helps someone.
Scritto da: robert j vondras
Love it
I used this on a plywood enclosure and have never been more satisfied. Tip: Do your home work before using it
Scritto da: julian caffrey
seals well, works great
I gave this 5 stars, but I feel like the suggested coverage is on the high side, so maybe 4 1/2 stars. However if you have a pristine smooth surface that you're coating, maybe it'll cover like they say. We were coating concrete, and so it the coverage was definitely reduced. The coating looks good however, and brushed on pretty good. We did 2 coats. Like many other reviews state - mix only what you can apply in 15 minutes, and not a drop more. I've never seen anything harden so fast... One sec it was like latex paint, then within 15 seconds it was like tar on the brush, and about 30 seconds later my brush was permanently glued to my paint tray. Would I recommend? Absolutely, just order about 30% more than you think you need. And work fast. No, work really fast. Looks great, and sealed our leak. Thank you
Scritto da: Norm McNee
Pond
The media could not be loaded. Very happy with the product and easy to install
Scritto da: Client Kindle
it works
the product does work really well but you have to work fast and it doesn't cover a really big surface. But it does work!
Scritto da: Veronica
Parfait
Étang

Související produkty

hot
Impresionistka Stupell Industries Lilly Pad Pond Painting, Design by Claude Monet Gray Framed Wall Art, 24 x 30, Blue
0.1/5

Kč 4585.63

Impresionistka Stupell Industries Lilly Pad Pond Painting, Design by Claude Monet Gray Framed Wall Art, 24 x 30, Blue
0.1/5

Kč 4585.63

hot
TotalPond skin skins Pond Liner, 13 x 20 stop, Black 13 stop x 20 stop
3.5/5

Kč 5063.59

TotalPond skin skins Pond Liner, 13 x 20 stop, Black 13 stop x 20 stop
3.5/5

Kč 5063.59

hot
Náhradní síťky na nářadí Aquascape Shark 74011, černé
3.6/5

Kč 1338.83

Náhradní síťky na nářadí Aquascape Shark 74011, černé
3.6/5

Kč 1338.83

hot
Pond Armor SKU-BLACK-QT2P Black Pond Shield 1,5 Quart kit 2 Pack Netoxický epoxidový nátěr
3.5/5

Kč 4721.80

Pond Armor SKU-BLACK-QT2P Black Pond Shield 1,5 Quart kit 2 Pack Netoxický epoxidový nátěr
3.5/5

Kč 4721.80

hot
Záplata na opravu podšívky Aquascape EPDM 6 palců pro jezírka, potoky a vodní zahrady
3.3/5

Kč 963.27

Záplata na opravu podšívky Aquascape EPDM 6 palců pro jezírka, potoky a vodní zahrady
3.3/5

Kč 963.27

hot
Pond Armor SKU-BLACK-3GA Shield Netoxický epoxidový, 3-galonový, černý 3galonový černý
3.5/5

Kč 22493.29

Pond Armor SKU-BLACK-3GA Shield Netoxický epoxidový, 3-galonový, černý 3galonový černý
3.5/5

Kč 22493.29

hot
Pond Armor SKU-SKYBLUE-QT-R Netoxická epoxidová barva na štít jezírka, 1,5čtvrtinová, nebesky modrá
3.5/5

Kč 2929.65

Pond Armor SKU-SKYBLUE-QT-R Netoxická epoxidová barva na štít jezírka, 1,5čtvrtinová, nebesky modrá
3.5/5

Kč 2929.65

hot
Netkaná geotextilní podložka Aquascape Inc 85010 pro rybník a vodní zahradu, 150 čtverečních stop, černá
3.8/5

Kč 3182.23

Netkaná geotextilní podložka Aquascape Inc 85010 pro rybník a vodní zahradu, 150 čtverečních stop, černá
3.8/5

Kč 3182.23

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array

Celkový:Kč 0.00

Viz košíkPřekontrolovat

Kategorie

Všechny kategorie
Jídelní lístek Kategorie U Vozík

Menu