Prime-Line E 2192 7/32 palcový čtvercový pohon Vícebodová zadlabací západka posuvných dveří (jedno balení)

Brand:PRIME-LINE

3.6/5

2479.96

POPIS PRODUKTU Tento vícebodový zadlabací zámek pro posuvné dveře je vyroben z tlakově litého kovu a hliníkových součástí a je dodáván s chromovanou zaoblenou čelní deskou. Obvykle se používá na posuvných terasových dveřích a má dvoubodový západkový mechanismus, jehož háčky směřují od sebe ve středu 3-3/4 palce. Montážní otvory jsou od sebe vzdáleny ve vzdálenosti 7-13/16 palce od středu a pouzdro měří tloušťku 9/16 palce. Když jsou háky zajištěny a zajištěny, zajistí vaše dveře lépe než zámek s jedním hákem pouze v jednom směru. OD VÝROBCE Tento vícebodový zadlabací zámek pro posuvné dveře je vyroben z tlakově litých a hliníkových komponentů a je dodáván s pochromovanou čelní deskou. Je vybaven 2-bodovým západkovým mechanismem, jehož háčky směřují od sebe ve vzdálenosti 3-3/4 palce ve středu. Jeho montážní otvory jsou od sebe vzdáleny ve vzdálenosti 7-13/16 palců a pouzdro měří tloušťku 9/16 palců.

Nejsou k dispozici žádné jednotky
Před nákupem si prosím přečtěte čárovou grafiku a porovnejte s vašimi potřebami. K instalaci je nutný křížový šroubovák. Součástí dodávky je veškerý potřebný montážní materiál pro rychlou a snadnou instalaci. Kompatibilní se zámkovou vložkou Prime-Line E 2000. Odolné tlakově lité pouzdro. Dvojité protilehlé ocelové háčky. Montážní otvory jsou 7-13/16 palce uprostřed. Typicky používané dveřmi Roto a řadou dalších výrobců posuvných terasových dveří.
Batteries Included? ‎No
Batteries Required? ‎No
Brand PRIME-LINE
Brand ‎PRIME-LINE
Color White
Color ‎White
Customer Reviews 4.5 4.5 out of 5 stars 126 ratings 4.5 out of 5 stars
Included Components ‎Multi point sliding door lock
Item Dimensions LxWxH 1.5 x 0.69 x 8.25 inches
Item Dimensions LxWxH ‎1.5 x 0.69 x 8.25 inches
Item model number ‎MP6707
Item Package Quantity ‎1
Item Weight ‎11 ounces
Manufacturer ‎Prime-Line Products
Material Mixed Materials
Material ‎Mixed Materials
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎Na
Product Dimensions ‎1.5 x 0.69 x 8.25 inches
Shape ‎Square
Size ‎7-13/16 in.
Warranty Description ‎Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

3.6

8 Review
5 Star
80
4 Star
8
3 Star
4
2 Star
3
1 Star
6

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: Carlos M.
perfect fit
fit perfectly and works as expected
Scritto da: moregreatstuff
perfect fit (eventually)
We have a 20+ y.o. patio glass door slider and the latch finally broke. The locking mechanism (a "mortise," apparently) had an " ii " logo and a patent number, that's it. It turns out that ii stands for "interlock" (now owned by assa abloy, a door hardware company). Most of these (prime line, STB, swisco) use the same interlock piece (you'll notice the branding is never clear in the photos). Whatever, find the one you like the best and buy it. Here are my "pro tips" for installation: (before installing the whole thing with the handle and tightening everything down, only to find that it doesn't lock quite right). * Pay attention when you take everything apart - lots of photos are good, you can always erase them later. * The inside handle and locking/latch lever are usually separate from a bracket - the bracket is screwed thru the door to the outside handle. They are attached to the bracket with set screws after everything is secure. * Before putting the mortise into the door - grab the locking/latch lever and insert it thru the hole in the mortise, push in the release "button" on the edge, then rotate the handle into the "locked" position. Notice the direction the handle goes from open to locked - it should be "up" when open, and "down" when locked. Flip the mortise, if needed, so that it goes into the door the right way. Don't worry about the inside handle and locking/latch lever yet, but keep them handy. * When you put the mortise in place, there are four main securing screws - two that go thru the door from the handle bracket thru the mortise/door to the outside handle, and two screws that hold the face plate to the mortise (the two towards the center). Lightly snug them all down, and close the door. Grab the locking/latch lever, stick it thru the hole in the door / mortise and rotate it into the locked (down) position. Now tighten the two screws that go thru the door. * Flip the lever to the unlocked position, slide the door open and tighten the two screws on the face plate. Test it a few times to check that it locks / unlocks OK, and reverse/repeat the same steps if you don't like the feel. * You can now put the lever & handle in place, tighten the set screws, and install the outer top & bottom screws on the face plate (My door cut out doesn't allow those two to be attached - I got over it) * You win!
Scritto da: trixie65
Sliding door
I had to look for another lock to our sliding door and I purchased this item because the seller listed all the measurements and made it easy for me to figure out which lock to buy. From a female's perspective those measurements helped me to choose the right lock and it was so easy for me to install. I would buy again from this seller
Scritto da: Joyce
Just what I needed.
I couldn't find tis in the hardware stores. This was exactly the solution to my broken slider door lock. Easy for me to install with clear instructions. Such a life saver for me.
Scritto da: Florence Weeble
Perfect fit!
Our big patio doors came with unusual type of locks; but being there are two of them and only was broken, we wanted both locks to match. So we hunted down the same model. Thank goodness we found the identical replacement on Amazon. It wasn’t cheap, but better priced than a specialty warehouse online. It fit the door slot perfectly! The two parts we had to get were the locking mechanism (shown) and its latching lever on the inside handle.
Scritto da: Bruce Hammond
Perfect replacement for broken lock.
This was a perfect fit for my broken sliding door lock. Very easy to install and I appreciated all of the detailed measurements provided in the description.
Scritto da: Kelly
Just like the original!
I found that this part was just like the original. Take note of what side is up and what side is down. That will determine which way your locking switch is positioned.
Scritto da: Jasoncarbuckle
... wrong one totally my fault but seem to be good quality
I bought the product but turned out to be the wrong one totally my fault but seem to be good quality

Související produkty

hot

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array