Rust-Oleum 250241H Ultimate Spar Urethane na vodní bázi, Quart, Satin Finish 32 Fl Oz (balení 1 ks) 32 Fl Oz (balení 1 ks) Satin

Brand:Rust-Oleum

3.6/5

1499.48

POPIS PRODUKTU Varathane Ultimate Water-Based Spar Urethane poskytuje křišťálově čistý nátěr na venkovní dřevěné povrchy s dlouhou životností. Samonivelační polyuretan utěsňuje vodu a nabízí vynikající odolnost proti poškrábání, povětrnostním vlivům a poškození UV zářením díky snadnému čištění mýdlem a vodou. Aplikujte minimálně 4 vrstvy nežloutnoucího poly pro maximální pomoc při venkovních projektech. OD VÝROBCE Varathane Crystal Clear Spar Urethane poskytuje maximální podporu UV pro ochranu před poškozením sluncem.

Nejsou k dispozici žádné jednotky
Extra rychle schnoucí naneste 3 vrstvy denně. Žádné tahy štětcem. Nízký zápach. Vynikající odolnost proti UV záření a povětrnostním vlivům. Nežloutnoucí složení udrží vaše dřevo déle skvělý vzhled. Křišťálově čistý, saténový povrch poskytuje klasický a přirozený vzhled. podporuje počasí a UV , krycí lak nežloutne a pomáhá proti přírodním živlům. Zasychá na dotek za 30 minut a kryje až 87 čtverečních stop na litr, přelakujte po 2 hodinách. Receptura na vodní bázi se snadno aplikuje a čistí mýdlem a vodou. Odolný polyuretan pro venkovní dřevěné povrchy, jako je nábytek, dveře, okna, ploty, lišty a další.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Rust-Oleum
Color ‎Satin Finish
Compatible Material Wood
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 1,598 ratings 4.5 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Finish ‎Satin
Finish Type Satin
Included Components ‎1-Quart Clear Finish
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎250241H
Item Package Quantity ‎1
Item Weight 1 Kilograms
Item Weight ‎2.2 pounds
Liquid Volume 946 Milliliters
Manufacturer ‎Rust-Oleum
Part Number ‎250241H
Product Dimensions ‎7 x 7 x 8 inches
Size ‎32 Fl Oz
Style ‎Satin
Usage ‎Windows,Doors,Furniture
Volume ‎1 Quarts
Warranty Description ‎Satisfaction Guaranteed

3.6

11 Review
5 Star
73
4 Star
15
3 Star
6
2 Star
2
1 Star
4

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: Jonathan
Good for minatures
Using this for DnD minatures, I have found that it is excellent for that purpose.
Scritto da: JDE
Great product but arrived damaged
As for the product itself it is great. But for Amazon, the product arrived with a huge dent towards the bottom of the can. A dent doesn’t affect the product itself however no one wants a dented can. They should offer small discounts if they are shipping dented products.
Scritto da: ZazzMan
ABSOLUTE NECESSITY for 3D printed respirators!
Fast-drying, non-yellowing, easy to apply, works over paint, easy to clean! And strong enough to keep the wrong glue working anyway. I CANT FIND THIS ANYWHERE BUT AMAZON and there is no comparable competition anywhere either. Making 3D printed respirator masks? The printer leaves a pourous surface that covid aerosols can easily slip through. This spar urethane fixes that. Loosely-attached strap holders that need to stay in a fixed position? Give them extra attention with this spray even after gluing. I know the directions say to allow the paint to fully dry... But i treated the first coat of urethane as another layer of aerosol paint. My paint was Rustoleum "Hammered" style. I applied urethane 30-120mins after the final paint coat, best results at 90minutes. 4 coats of urethane works great. My masks have threaded filter ports. I could not paint them and have the filter-caps still work. But a couple coats of urethane works great on the threads. I spray *Everywhere* that isnt threaded. I reuse the same painters-tape loops for each same paint color. And another loop for urethane. My only complaint? I NEED A BIGGER CAN. It only lasts for ~12 masks, if Im conservative with it. Other amazon-only products needed: B-style door frame weather seal (BULK IS GOOD) as mask seals. 33ft is lasting me enough for almost 50 masks. Several varieties available on Amazon. Food-safe, clear, Caulk-gun compatible "RTV Silicone" - used to seal the gasket on. Lasts similar to the gaskets.
Scritto da: Hise
A minimum of 4 coats recommended...
Purchased this item expecting 2 coats would be sufficient. 4 coats minimum? So what 5-6 coats are good? 2 hours in between minimum, max 3 coats a day... I have a job and other things to do. I only could do 1 coat a day, not to mention the 2 days of staining beforehand and sanding. I was expecting to seal my old door not clear coat an antique Ferrari. I've fully remodeled and tiled a half bathroom in less time than this requires. Re-staining an old fiberglass door is going to become a five day project, that's not reasonable for a small thing like this. I'm going to do it, but quite annoyed and after 5 coats this door better be bulletproof!
Scritto da: Darlene Welch
What every artist needs
I paint and this is perfect for my outside stuff
Scritto da: Angela K. McBride
crystal clear, easy to apply, hard not to leave brush strokes on non-absorbing surfaces (fine on wood)
Ok, this product became one of my favorite, but not for the original intended use. I wanted to clear coat some counter tops in my sailboat, and wanted some UV resistance because you know, it's a boat, in Florida. However, as a clear coat on a very light uniform plastic surface (doesn't absorb the product) it was impossible to get rid if very tiny, hard to see (but still there) brush strokes). Most of the time the brush strokes weren't visible, but depending on the light, they would appear and I didn't like that. HOWEVER: I then tried the product on wood, and there was not the slightest brush stroke. PERFECT. Also, I love that it is indeed crystal clear and doesn't alter the color of the wood. I ended up using it on my teak and holly sole inside the boat, despite the fact that it is not recommended for flooring, for several reasons: - it is VERY EASY to apply. - it dries INSANELY FAST, at least in Florida. I could re-coat every 5 minutes. - no sanding required - doesn't alter the color of the wood, but beautifully enhances the grain (like when the wood is wet). - seals the wood / waterproofs the wood - doesn't yellow the holly wood (originally white) like teak oil or varnish or other clear coat would. The result is fantastic, took me less than 1 hour for a 30 foot boat, and can be redone anytime easily and quickly if needed. So who cares if it doesn't last 10 years, it is cheap, fast, easy, looks great, and requires no maintenance, no sanding, no mess when re-applying in the future, while protecting my teak&holly sole well. I highly recommend this to any boater who doesn't want to spend a week on varnishing or coating the sole and wants an easy 100% guaranteed perfect result (no strokes, no bubbles, no issues, apply right off the can as you want with a foam brush you CANT GET IT WRONG. LOVE IT.
Scritto da: Bonita L Chaney
Damaged can
I always use this product, however the description never said damaged. And box it was packaged in was in perfect condition.
Scritto da: robert leib
Does a nice job
I bought a piece of wooden furniture for my beach house. It was already stained and painted, but I wanted to protect it from the elements. I checked with a friend who suggested this product. It worked great and clean up was with water, not any solvents. I read an article that recommended using a sponge brush, worked great too. I went over with steel wool and did a second coat. It rained a day or so later and we was proud how it beaded right up!
Scritto da: ranganath t k
Good product
Good
Scritto da: Ramsinghsahni
Not as good as expected. Very costly.
Not as good as expected for its very high cost. The color comes darker than that shown on the container. It may or may not protect the wood but it certainly spoiled the natural outer look of my teak doors and windows.
Scritto da: dor
Second hand- not impressed
Paid premium price for a product that came used (paint dripping on lid and down the side), dented from the lid being pounded back on and rusty. Lid also had two metal clamps installed to keep the lid on as product was dented.

Související produkty

hot
POZADÍ
4.1/5

Kč 3557.09

POZADÍ
4.1/5

Kč 3557.09

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array