SharkBite 1/2 palcový MNPT adaptér, mosazná vodovodní armatura Push to Connect, PEX trubka, měď, CPVC, PE-RT, HDPE, U120LFA 1/2 palce.

Brand:SharkBite

3.7/5

628.87

POPIS PRODUKTU Zjednodušte si své instalatérské potřeby pomocí SharkBite Push to Connect MNPT mužského adaptéru. Tvarovky SharkBite se skládají z odolné bezolovnaté mosazi a mají design s plným průtokem pro maximální výkon vody a lze je použít s libovolnou kombinací měděných, PEX, CPVC nebo PE-RT trubek a vyznačují se designem pro snadné připojení zatlačením, který umožňuje rychlá instalace. Není nutné žádné krimpování, lepidlo, pájení nebo nástroje, jednoduše vložte trubku a zuby z nerezové oceli se zakousnou a pevně sevřou, zatímco speciálně vyvinutý O-kroužek stlačí a vytvoří dokonalé utěsnění. Adaptér MNPT lze snadno demontovat pomocí odpojovacího nástroje, takže armatury a ventily lze snadno vyměnit a znovu použít (nástroj na odpojení není součástí dodávky). Armaturu MNPT lze po sestavení dokonce otočit, což umožňuje snadnější instalaci ve stísněných prostorách. Tato vodovodní armatura MNPT je certifikovaný vyráběný spoj, který lze instalovat do mokrých linek a pro aplikace pod zemí i za zdí. Adaptér MNPT push to connect je dimenzován na 200 psi a 200 stupňů F a je dodáván s 25letou zárukou. OD VÝROBCE SharkBite je spojovací systém push-fit, který se opravdu ujímá. Je to nejjednodušší způsob, jak spojit měděné, CPVC nebo PEX trubky v jakékoli kombinaci – bez pájení, svorek, spojek nebo lepidla. Stačí vložit trubku a zuby z nerezové oceli se zakousnou a pevně sevřou, zatímco speciálně vyvinutý O-kroužek se stlačí a vytvoří dokonalé utěsnění. Demontáž je stejně rychlá pomocí jednoduchého odpojovacího nástroje. Takže armatury a ventily lze snadno vyměnit a znovu použít. Po sestavení je lze dokonce otočit pro snadnější instalaci ve stísněných prostorách. Získejte SharkBite a ovládněte svůj další instalatérský projekt. Tyto armatury neobsahují olovo a splňují všechny požadavky na instalatérské práce v Kalifornii a Vermontu.

CERTIFIKOVANÉ: Armatura MNPT je certifikována jako vyráběná spojka a může být použita pro aplikace pod zemí a za stěnou bez přístupových panelů; dimenzovaný na 200 psi a 200 stupňů F. ODOLNÝ: Armatura neobsahuje olovo a je odolná proti korozi pro dlouhou životnost a spolehlivost. KOMPATIBILNÍ S TĚSNÝMI ​​PROSTORY: Mosaznou armaturu lze po instalaci snadno otáčet na trubce pro použití ve stísněných prostorách. SNADNÉ POUŽITÍ: Přímý konektor má inovativní design push-to-connect umožňující rychlou a snadnou instalaci; není potřeba žádné nářadí, pájení, krimpování nebo lepidlo. MOSAZNÁ VNITŘNÍ KONSTRUKCE: Vnější armatura může být použita pro připojení k jakékoli kombinaci měděných, PEX, CPVC nebo PE-RT trubek; lze použít pro mokré linky.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Color Brass
Color ‎Brass
Connector Type Adapter
Connector Type ‎Adapter
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 2,944 ratings 4.7 out of 5 stars
Exterior Finish Brass
Exterior Finish ‎Brass
Finish ‎Brass
Included Components ‎Fitting
Installation Method ‎SharkBite Push-To-Connect
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10.75 x 4 x 6.25 inches
Item Dimensions LxWxH ‎10.75 x 4 x 6.25 inches
Item model number ‎U120LFA
Item Package Quantity ‎1
Item Weight 0.1 Pounds
Item Weight ‎0.1 Pounds
Item Weight ‎1.6 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Measurement System ‎Inch
Number Of Pieces 2
Number Of Pieces ‎2
Part Number ‎U120LFA
Product Dimensions ‎10.75 x 4 x 6.25 inches
Size 1/2 in.
Size ‎1/2 in.
Style ‎Brass Push Male Adapter
Thread Type NPT
Thread Type ‎NPT
Warranty Description ‎Lifetime

3.7

13 Review
5 Star
82
4 Star
11
3 Star
3
2 Star
1
1 Star
3

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: AmazoCedric
The Amazing Sharkbite 1-1/4 connector fitting
This fitting is the answer to replacing the unreliable ugly boot coupling for smooth copper pipes coming out the wall. This is the the answer for older homes with copper pipes. Tight fit over the copper pipe with no leaks. Sharkbite a friend for life.
Scritto da: Wendy Chan
It works!
Easy to install and very solid connection. It serve the purpose.
Scritto da: John
Quality
Excellent product
Scritto da: Veetuch
Easy to use
Love using Shark Bite connectors, especially when I have to do connections inside the rafters. No soldering with a torch and these are simple push onto your pipe and they stay in place. Good quality material and no leaking. Recommended them for your project.
Scritto da: Anonimo
Initially concerned....
Not gonna lie. When I first got these I was concerned about leaks and waking up to my basement flooding as I had never used them. I'm used to either brazing copper pipes or priming and gluing pvc tubing. I'm a bit of a control guy and when I moved into my house years ago had ripped out the horror that was the tubing entering my basement from the well pump.. put in a whole house filter, pressure tank, other, removable filters and carbon filters, water softener etc. After years of use the softener had given up and the mechanisms sprung leaks all over. I wanted to take that out and instead put in an iron removing filter as our sinks and toilets need constant scrubbing with some of our lighter clothes becoming "work on the car" items due to staining. I read a lot of reviews here and elsewhere about the sharkbite connectors and wound up ordering them.. heck, they were returning so why not? I cut cpvc to length and put connected everything with sharkbite elbows, reducers, and a valves. Once I slipped everything together, crossed my fingers and opened up the water. Hmm,.. so far so good but lets wait and see.. turned on the water throughout the house and watched everything pop and shake as air bled out of the system and pressurized to 70psi. Okay.. so far so good. Cleaned up and went upstairs to eat.. came back down checking for leaks... went to watch tv (The Boys-started slow but ROCKS)... wife and I took turns checking for leaks. Went to bed... got up a few times... and now it's been a few weeks. Not a drop of water and none of the pipes has tried to slip out as we have them all marked for this purpose. These things rock! One of the things I like best is that you can rotate the fittings (ie; the pipes can still move, rotate etc) without leaks which means it's all super forgiving if you get your lengths slightly off and stuff is not 100% straight and true.. it adjusts.. something PVC and Copper do NOT do... and I can also move stuff around a few inches if needed without cutting/de-brazing pipes etc. I'm a convert!
Scritto da: Reality Check
This fitting really saved the day
I had to change out a tub valve through a tiny 7 inch round opening . This fitting had 4 pipes: A hot and cold PEX, a PEX running to the shower, and a hard copper line running to the tub spout. All fittings were iron pipe thread into the valve. The PEX fittings will slip and rotate (with some difficulty) so I was able to unscrew them, and I was barely able to fit a mini tubing cutter around the copper to cut it. That's where this SharkBite fitting came in. With a bit of delicate attention to the end of the copper to make sure that it wasn't sharp, this fitting slid right over the copper and allowed me to tighten it into the valve body. Everything lined up like before and nothing leaked. This took all day, but that was due to the tiny opening that i had to work through. This SharkBite was the easiest to install (30 seconds) and everything is just as rigid as before. Well worth the money. My only concern was that there was a bit of solder on the pipe that I delicately filed off. After that I polished it off with 600 grit sandpaper to eliminate any possible remaining file marks. If there had been a solder bump or file groove, it is quite possible that would have resulted in a leak, since the sealing location point is to the outside of the pipe. In the end all worked out well, and I am satisfied.
Scritto da: Tom Holland PA
Easy
If you're as old as me and handy, you've experienced sweating copper pipe with lead solder then the newer lead-free, making sure there isn't a drop of water in the line and hoping, compression fittings with the slip on brass ring that may work. SharkBite fittings replace all other methods when working with copper and they work even when there is water in the line. Simply cut the pipe and push on the connector. Great in older homes and hard to reach places.
Scritto da: T Nielson
false advertising
It said it was a pack of 6, I only got 1
Scritto da: Synonymous
Working great so far
Used these on a hot water tank and they've been tight and dry for more than a year. Make sure you have no tension on the joint and the connection is straight. Recommended.
Scritto da: Mountain man.
Slips on easily and no leaks
Had to reduce 1 1/4” pex to 1”. Used the 11/4” shark bite with a reducer adapter on the end.
Scritto da: Super Dave
Works great, very long delivery time
First time using shark bite and I am thoroughly impressed. Easy fast and leak free. I’m selling my propane torch
Scritto da: Debashis Dey
New age fittings
Check Sharkbite fitting on the net and you would know how they can make your life easier for plumbing. This are all push type fittings and we use it extensively all across with CPVC pipes.
Scritto da: claude
exellent
who ever invented these should be made king

Související produkty

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array