Šrouby Power Pro 47872, 1/4 x 1-1/2, Šrouby s hvězdicovým pohonem, nerezové, bronz s keramickým povlakem, 5lb vana, 375 ks 375 kusů

Name: Šrouby Power Pro 47872, 1/4 x 1-1/2, Šrouby s hvězdicovým pohonem, nerezové, bronz s keramickým povlakem, 5lb vana, 375 ks 375 kusů
Brand: Power Pro
SKU: 0008236695076
Price: 2274.63 CZK
Availability: InStock

Brand:Power Pro

3.7/5

Kč
2274.63

POPIS PRODUKTU Stavební šrouby jsou ideální pro váš další venkovní projekt. Mezi běžné aplikace patří paluby, schodiště a herní sady. Tyto produkty mají vlastnosti, které jsou působivé a jedinečné. Na vrcholu seznamu je nová technologie Star Drive, která prakticky eliminuje vysunutí a zajišťuje pokaždé hladkou jízdu bez námahy. Šance na štípání dřeva výrazně snižují patentované příčné závity a bod řezu pro kousání dřeva. Tyto dvě vlastnosti se spojují, aby se zabránilo štípání dřeva broušením dřeva a odstraňováním vláken z otvoru. Používejte s ošetřeným řezivem. OD VÝROBCE Tento produkt má vlastnosti, které jsou působivé a jedinečné. Vrcholem seznamu je nová technologie Star Drive, která prakticky eliminuje kamuflování pro plynulou jízdu bez námahy pokaždé. Šance na štípání dřeva výrazně snižují patentované příčné závity a bod řezu pro kousání dřeva. Tyto dvě vlastnosti se kombinují, aby se zabránilo štípání dřeva broušením dřeva a odstraňováním vláken z otvoru.

Množství

Přidat do košíku Kup nyní

EAN: 0008236695076

Kategorie Průmysl a věda, Hřebíky, Šrouby a spojovací materiál, Šrouby, Šrouby do palubek,

5lb Tub obsahuje přibližně 375 kusů; tento sortiment se prodává na váhu a skutečný počet kusů se může lišit. DOPORUČENÉ POUŽITÍ: Bezpečné pro použití místo standardních šroubů. STAR DRIVE, TRUSS HEAD: Eliminujte cam-out pro hladkou jízdu bez námahy pokaždé. ODOLNOST PROTI KOROZI: Bronzový keramický povlak překračuje 1 000 hodin testu v solné mlze podle ASTM B125. NAVRŽENO PRO VENKU: Mezi běžné aplikace patří paluby, schodiště, herní sestavy a mnoho dalších venkovních dřevěných projektů.

Drive System	Torx
Exterior Finish	Epoxy
Head Style	Truss
Item Dimensions LxWxH	6.8 x 5.3 x 4.7 inches
Item model number	47872
Manufacturer	The Hillman Group
Material	Steel
Product Dimensions	6.8 x 5.3 x 4.7 inches; 0.01 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena^*

Vase hodnoceni

Scritto da: Roby

Great look send hold

Everything about these lag bolts is first class except for self starting they seldom bite and start anchoring without a pilot hole.

Scritto da: William E Lovelace Jr

TOP NOTCH FRST CLASS WOOD SCREW.

I HAVE BEEN USING THESE SCREWS FOR YEARS. FIRST TIME I HAVE BOUGHT THEM OFF OF AMAZON. IT WONT BE THE LAST TIME. NICE BIG HEAD ELIMINATES A WASHER. LOVE THE STAR DRIVE. I HAVE USED THESE SCREWS TO ATTACH LUMBER TO METAL. DRILL A THROUGH HOLE IN METAL AND RUN SCREW THROUGH IT TO THE WOOD.

Scritto da: Corey

Screws are great, included bit isn't

Great product and I'll buy again, but the included bit broke quickly. Bought a set of Bosch bits and everything is good.

Scritto da: Duane

Best option for a 1.5" length (hard to find short lags)

SPAX also makes (used to make) a 1.5" coated construction lag with a hex-head. I used some of those for attaching my deck posts to the footers. (I may have actually used a 2"?) Anyway, that's the only other brand that I know of with a short-depth coated lag screw, and they are more expensive than these. I'm using these to bottom-screw new floorboards (2x6) on my utility trailer. The original deck was top-screwed using hardened machine screws that were NOT coated or SS (don't get me started...) I have already replaced a couple boards with these and they held up great, so now I'm redoing the entire floor with them. If you only need 10 or so for a small project, Lowe's sells these by the screw. If you need a lot, best to get the whole box. I need 70-80 for the trailer, but at the price of the large box, I figured I'd shell out $20 for essentially a lifetime supply.

Scritto da: Robert M

Overall a good quality screw, but the driver doesn't seat into screw head well enough and creates problems.

I used these screws on my redwood fence. I used steel brackets to hold up the rails, and used these screws to attach the rails to the brackets. First thing I noticed, the torx drive that comes with the screws doesn't fit well into the screw head. They don't seat well and you'll likely slip out of the screw head numerous times. You have to use your free hand to control the screw as you drive it in or it will end up angling into the wood badly. I ended up taking the screw to my local hardware store and finding a better driver that sat well in the head. Huge improvement. The other problem is that the "pre-drilling" effect of the screw can really tear up soft woods like redwood. You have to go very slow at first or you will strip the wood out and won't get a good, snug fit. The first 1/4" of the screw is very serrated to help it drill into the wood. This is good for hardwoods, bad for softwoods. I didn't knock the star off for this though. I took off a star for the driver being lousy.

Scritto da: Charles Cook

Decent star drive

Bends easy, and head strips out similarly. Snapped off several heads too.. I'll let you know if they rust.

Scritto da: Roadrunner

Won't attach wood to metal tube fence framing

I bought these because a reviewer said they were frequently used to attach wood to metal. Maybe to thin metal sheet goods, but who does that? I tried to use them to attach fence boards to 1"x 1" metal tube fence framing and quickly found out their "self drilling" tips didn't penetrate metal. For that you need screws with the flat blade type self drilling tips. Maybe the reviewer was predrilling his holes. I would give these five stars for attaching wood boards to wood framing without predrilling.

Scritto da: bignatedunk

Great quality

Great quality and the price was 1/10th home depot who wants to sell these at .70 a screw!!!