Stahovák kazet Danco 86712 Moen, balení 1 ks, stříbrný

Name: Stahovák kazet Danco 86712 Moen, balení 1 ks, stříbrný
Brand: Danco
SKU: 0362225732785
Price: 1034.16 CZK
Availability: InStock

Brand:Danco

3.5/5

Kč
1034.16

POPIS PRODUKTU Společnost Danco je jedním z největších dodavatelů instalatérských oprav, výměn a předělávek v odvětví domácích kutilů, kteří se z velké části soustředí na to, aby spotřebitelům „udělej si sám“ instalatérská řešení, která jsou stejně praktická jako cenově dostupná a dodají vašemu domovu více svěží přitažlivost a obnovená elegance. Poskytujeme stylová, designově orientovaná inovativní řešení pro domácnost, která jsou uživatelsky přívětivá, podporují a povzbuzují zákazníky k tomu, aby se vypořádali s domácími úkoly sami – bez vysoké ceny za profesionální služby. Vyjměte starou kazetu z kohoutku pomocí stahováku kazet Danco pro Moen. Tento nástroj je kompatibilní s Moen 1222, 1225 a 80933. Tento nástroj funguje pro kazety, které jsou plastové a mosazné. Instalace nové kartuše eliminuje netěsnost kohoutku a šetří vodu i energii. Vytahovač kazet Danco vám pomůže usnadnit vaši vlastní instalaci do umyvadla, koupelny nebo vanové baterie. Získejte svůj ještě dnes! OD VÝROBCE Danco je jedním z největších dodavatelů instalatérských oprav, výměn a předělávek v odvětví domácích kutilů. Z velké části se zaměřujeme na to, abychom spotřebitelům Do It Yourself umožnili cenově dostupné instalatérské produkty a řešení, která vytvářejí nové a osvěžující dekorace koupelen a kuchyní.

Množství

Přidat do košíku Kup nyní

EAN: 0362225732785

Kategorie Nástroje a domácí potřeby, Hrubé instalatérské práce, Díly a součásti vodovodních baterií, Sestavy,

VYROBENO: Odolná hliníková konstrukce poskytuje pevnost a spolehlivost. VAŇOVÉ/SPRCHOVÉ BATÉRIE: Nástroj na vyjmutí patrony slouží k odstranění starých opotřebovaných patron z vanových a sprchových baterií Moen. KOMPATIBILITA KAZETY: Vytahovač patron faucet je navržen tak, aby nasazoval a vyjímal mosazné i plastové patrony. FUNKČNÍ: Odstraňuje zamrzlé kazety a uvolňuje pouzdra POUZE na kohoutcích MOEN. KOMPATIBILNÍ MOEN: Vyměňte svou starou vaničku/sprchu Moen Posi-Temp za model Danco 88431E (nahrazuje OEM#1225), model 80993TS (nahrazuje OEM#1200), model 88675A (nahrazuje OEM#1222). NÁSTROJ NA VYJMUTÍ NÁPLNĚ: Odstraňuje zásobníky do sprchových van Moen/sprch Posi-Temp řady 1200, 1222 a 1225.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎Silver
Customer Reviews	4.5 4.5 out of 5 stars 3,801 ratings 4.5 out of 5 stars
Finish	‎Steel
Included Components	‎Cartridge Puller
Is Discontinued By Manufacturer	‎No
Item model number	‎86712
Item Package Quantity	‎1
Item Weight	‎4.6 ounces
Manufacturer	‎Danco, Inc.
Material	‎Aluminum
Measurement System	‎Metric
Part Number	‎86712
Product Dimensions	‎1.4 x 5.1 x 7.1 inches
Size	‎Pack of 1
Style	‎Puller
Warranty Description	‎Limited 1 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena^*

Vase hodnoceni

Scritto da: Michael L.

Worked like it's supposed to.

Puller worked like it was made to, pulled it out to the limit of the pressure nut, pulled some by hand, but the old cartridge was half way out and still stuck. Took the puller off, got a 1 inch piece of 1 inch sch 40 pvc ( or get a 3/4 in pvc coupler and cut off what you don't need, both are 1 in inside diameter) and put it on the cartridge to extend the reach of the nut. Put the puller back on, turned the nut a few more times, and got the mangled mess of rubber all the way out. Disregard the youtube videos that say pull it out with channel lock pliers, unless you're feeling lucky and the cartridge you're pulling out hasn't been in there very long.

Scritto da: Robert J. Keltos

Worked great for removing old cartridge.

This is a must to remove the old cartridge without too much difficulty. Take your time and it does the job.

Scritto da: Robert K

worked pretty ok for me.

worked pretty ok for me, but it would be better if the pressure bolt were large to help remove the valve further.

Scritto da: Amazon Customer

perfect

just what I needed. Did the job.

Scritto da: Amazon Customer

prevented the stuck valve that was shown on you tube

arrived on time and as described, will keep for any future repairs sine all faucets in my house are moen first repair in thirty years

Scritto da: Steeler50

Works well and much cheaper than a Mown one. Save some money with tis one.

All good and works well.

Scritto da: Bez

Works like a charm

Did 3 cartridge pulls without a problem. Very easy to use and durable. I recommend for those stubborn cartridge replacements.

Scritto da: GEORGE FOLDI

Ease of use

This Moen Cartridge Puller worked GREAT. I tried using the instructions that Moan gave with the new cartridge and their way I would need three men and a boy pulling to get the cartridge out. Using this puller made it so much easier. Connect the puller to the old cartridge and then using a crescent wrench I just slowly kept turning the wrench on the puller and in about four turns the old cartridge started to move out of the housing. So relieved once it was removed. After that putting the new one in was a breeze. Would recommend this for anyone having to remove an old cartridge. To bad they don't make a universal puller for other cartridges.

Scritto da: Xenos

Good tool for its purpose

My 22+ years Moen bath/shower faucet had begun dripping at the handle whenever I turned the water on and for years had been stiff so I finally decided to fix it by replacing the cartridge with a new one. I initially tried to pull the old cartridge out using just a pair of pliers but I was unable to do so. I checked online for advice and saw a number of references to a Moen brand cartridge puller tool but it was listed at over CAN$40. The cartridge itself was listed at CAN$36 at one of the big DIY stores. Reluctant to pay 40 bucks for a tool that I would probably never use more than once, I looked for a cheaper alternative and I found it in the Amazon listing for this tool. Yes, the tool is made of aluminum rather than steel and some of the plating came off after using it but it worked like a charm and I was able to replace the cartridge with the new one very easily. Oh and the new cartridge it turns out didn't cost me anything because the faucet came with a lifetime warranty. So for the 20 bucks I paid for this tool, I was able to bring back my old faucet to a brand new condition and it now works smoothly without any dripping. Overall this is a good tool for its purpose.

Scritto da: Amazon Customer

Four Stars

Nice tool Thanks

Scritto da: Brett

Works good and worth the money

Very light material compared to my other puller.. but it worked well. I broke my other cartridge pulling it out with my other cartridge puller that was meant for a different cartridge so I wanted to get this one that was meant for my cartridge so I didn't break it and spend hours trying to drill out my cartridge being careful to not hit any pipe. I got the cartridge half out and broke it again with this one but that was my own fault because I started to put pressure from side to side instead of pulling straight out. . But having it half out only took a couple mins to destroy and pull out the old cartridge. So I would say this is worth buying just don't push side to side.

Scritto da: wilma elliott

An excellent tool that's simple to use

What a slick invention! The cartridge came out easily.

Scritto da: jrb_sland

Well made, will be worth the money with a very stuck cartridge

Several YouTube videos about replacing Moen cartridges use this {or similar} tool to make cartridge removal more effortless. Turns out I didn't actually need it this time around, but I have other Moen faucets in my house, and the tool sits quietly at the bottom of a bathroom cabinet drawer...