Steelex D1026 35-milimetrový vyvrtávací vrták na panty, osazený tvrdokovem

Name: Steelex D1026 35-milimetrový vyvrtávací vrták na panty, osazený tvrdokovem
Brand: Steelex
SKU: 0769433110266
Price: 925.68 CZK
Availability: InStock

Brand:Steelex

3.6/5

Kč
925.68

POPIS PRODUKTU Perfektní volba pro vytvoření čistých vstupních otvorů s hladkým vnitřkem pro panty evropského stylu. Vyvrtávací korunka z tvrdokovu dobře funguje ve všech dřevech, dřevotřískových deskách a laminátech. Pro použití ve vrtácích se sklíčidlem 3/8. Specifikace:* Průměr 35 mm * Stopka 3/8 * Tvrdokovový nástavec OD VÝROBCE Vrtací vrták s tvrdokovovým nástavcem vytváří čisté vstupní otvory s hladkým vnitřkem pro panty evropského stylu. Používejte pouze na vrtačkách s 3/8palcovým sklíčidlem

Množství

Přidat do košíku Kup nyní

EAN: 0769433110266

Kategorie Nástroje a domácí potřeby, Elektrické a ruční nářadí, Díly a příslušenství elektrického nářadí, Nástroje a příslušenství pro vrtačky, Vrtačky vrtáků, Vrtačkové vrtáky,

Typ produktu: VRTÁKY. Výška balení: 1,27 cm. Šířka balení: 7,62 cm. Délka balení: 15,748 cm.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Steelex
Customer Reviews	4.6 4.6 out of 5 stars 48 ratings 4.6 out of 5 stars
Included Components	‎Steelex D1026 35-Millimeter Hinge Boring Bit, Carbide Tipped
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	6.2 x 3 x 0.5 inches
Item model number	‎D1026
Item Package Quantity	‎1
Item Weight	‎4 ounces
Manufacturer	‎Steelex
Material	Carbide
Material	‎Carbide
Part Number	‎D1026
Product Dimensions	‎6.2 x 3 x 0.5 inches
Shank Type	Straight
Tool Flute Type	Straight

5 Star

4 Star

3 Star

2 Star

1 Star

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena^*

Vase hodnoceni

Scritto da: Amazon Customer

Clean cutting!

Easy to use and very clean cut

Scritto da: Halr

Won't center in drill press chuck easily

Because this has a flat spot on the side of the bit, I found it difficult to center in my drill press. It was off-center initially and I had to keep spinning it in the chuck and retightening to get it centered. Way too much effort and it could slip and be off-center again if the chuck is not tight enough. Also, the shaft is very short and I found it hard to get the bit close to my work using the drill press with a table top and small fence setup. A longer shaft would have made it easier for sure, but the real issue was the flat spot on the shaft.

Scritto da: Amazon Customer

This is a very good drill bit

This is a very good drill bit. I am making raised panel doors and this bit is staying sharp and cuts very smooth. Highly recommend.

Scritto da: C B

Four Stars

Nice bit

Scritto da: Ron

Boring Bit

Very Good quality and worth the price. If you need a hinge boring bit look no further buy this one.

Scritto da: Robert E. Bassett

Perfect for 1 7/16th Clock Inserts

A lot of these clock inserts come with a rubber ring around them instead of the normal mounting tabs. this 35mm bit is just enough larger to making mounting the insert a breeze.

Scritto da: Harb43

The tool for the job!

I purchased this to drill holes for Blum hinges in the maple frames of my new kitchen cabinet doors. I've used Forstener-type bits before (which this isn't) and was moderately satisfied. But, this Steelex bit drills the cleanest holes I have ever seen. I used the bit in a drill press; with those spurs, I doubt if this could be handheld. The bottom cutters made smooth clean shavings like a small plane. The finished holes were a glove fit for the hinges, even after slight overspray on the sides of some of the holes. I made a simple jig to position the doors on my drill press, and drilled 44 holes. The last holes showed no deterioration in the bit. I'm sure it could do many hundreds of holes. Very satisfied with this purchase.

Scritto da: S. Kinnear

Good cutting

Just use this for 35 door hinges. Worked perfectly.

Scritto da: Gilles

une mèche bien parfaite

Utiliser pour percé les trous de charnière 35 mm . Égal aux attentes que j'avais avec ce genre de mèche.

Scritto da: Amazon Customer

Buen producto

La herramienta funciono bien, es de buena calidad.