uxcell a15012200ux0336 G 1/4-19 BSP 55stupňový trubkový závit HSS závitník 4 rovné drážky

Name: uxcell a15012200ux0336 G 1/4-19 BSP 55stupňový trubkový závit HSS závitník 4 rovné drážky
Brand: uxcell
Price: 638.20 CZK
Availability: InStock

Brand:uxcell

3.8/5

Kč
638.20

Posuv podle stoupání, je třeba vysoký krouticí moment. Čtyři rovné drážky. Trubkový závitový závitník BSP 55 stupňů. Počet fléten: 4; Velikost čtvercové hlavy: 9 x 9 mm / 0,35 x 0,35 (D*Š)

Množství

Přidat do košíku Kup nyní

EAN:

Kategorie Průmysl a věda, průmyslová elektrotechnika, Kabeláž a propojování,

Čistá hmotnost: 41 g; Obsah balení: 1x kohoutek. Barva: stříbrná;Materiál: HSS. Průměr stopky: 11 mm / 0,43; Celková délka: 64 mm / 2,5. Délka závitu: 26 mm / 1; Počet drážek: 4; Velikost čtvercové hlavy: 9 x 9 mm / 0,35 x 0,35 (D*Š). Název produktu: Závitník;Velikost závitu: G 1/4-19 (průměr 13 mm);Typ závitu: BSP (55 stupňů).

Country of Origin	China
Item model number	a15012200ux0336
Manufacturer	uxcell
Package Dimensions	5.2 x 3.98 x 0.79 inches; 1.76 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena^*

Vase hodnoceni

Scritto da: Amazon Customer

Decent tap

It will tap plastic, and probably aluminum/brass, but Id be hesitant to cut anything harder with it. Some burrs left on the tap from where they cut the threads. It does seem to thread properly, and PC water cooling fittings engage and tighten.

Scritto da: Vic

Worked perfectly

Purchased for building PC cooling parts. Just as well. Had an assortment of badly threading parts, quick turn through with this thing had them threading perfectly.

Scritto da: Michael Raymond Agustin

The best tool for my Liquid cooling project !

The media could not be loaded. I dont have the handle so i made one with my 3D printer. and it works great with acrylic all fittings fits perfectly. Note I apply a little silicon sealant. and note its my first time to do liquid cooling the tubing bend are not so perfect haha! goodluck and enjoy !

Scritto da: Kevin C

Does what it should, but needs to be used correctly.

This cuts G1/4 just fine... UNLESS you try to use it on high speed tools or without lubrication. I knew what to expect, tried it on a scrap piece with no lube, and it cracked and broke the edges. The slowest speed on my drill press and a little mineral oil and I ended up with perfect cuts in 1/8", 1/4" acrylic and 3/8" Lexan. It started cutting exactly where it should, and I didn't have any travel before it bit. Mineral oil is usually the cheapest lubricant and works fine, but if you have anything medium bodied and silicone based then that's easier to clean off. The problem is that those usually come in "flavors"...if you catch my meaning.

Scritto da: The Dude

Great tap for composite D5 pump tops!

This tap worked great to mod the inlet and outlet of the D5 pump top with barb fittings. My D5 pump had 1/2" hose barb fittings cast into the composite pump top. I wanted to be able to use standard G1/4 fittings without shelling out the stupid money for a pump top that would accommodate my needs, so I cut off the barb, enlarged the hole to 13/32, and hand tapped the threads. Worked a treat and now I can use standard fittings screwed directly into my pump. The tap paid for itself in the first use. Very pleased with the threadform and fitting feel.

Scritto da: Amazon Customer

Accurate pipe thread tap

This is a correct British 1/4-19 pipe thread tap. I used it for cleaning up British threads on SU Carb banjos. It worked perfectly for me.

Scritto da: Alex

Great

Can't complain about a thing. Taps cast acrylic, 360 brass, and 145 copper without any issue. Use some cutting fluid for a tap of this size to avoid chips in acrylic and lubricate the metal to metal contact. Using these, as many other reviews do, to tap for the standard G1/4" in PC watercooling. Ordered several of these and all of them work just as they should. I use my milling programs to cut the hole, so I know I'm always dead straight and down to the .0001" for the rigid tapping cycle.

Scritto da: Gunnar Sommerfeldt

Arrived very quickly - though with some rust on it, for some reason?

Sturdy, nice and heavy feel. Would have been 5 stars if it wasn't for the rust on it when it arrived - superficial and only on the "shaft", but a little weird.