WingIts RC-MAWSD35-2 Master Anchor Super Duty pro sádrokarton, 10/32palcový šroub z nerezové oceli, 2 balení

Brand:WingIts

3.1/5

876.38

Nainstalujte pomocí vrtáku Apache200 (RC-WA200GTS34) pro snadné provrtání materiálu pomocí vaší akumulátorové vrtačky. Předměty lze snadno vyjmout a vyměnit. Naše patentované WingIts' Fasteners se NIKDY neuvolní. S HRDOU vyrobeno v Americe. NENÍ určeno k instalaci záchytných tyčí. Pro instalaci madla se podívejte na naše další patentované upevňovací prvky: buď rc-ssbgbw40-2 nebo rc-resgbw35-2.

EAN: 0811175010189

Kategorie Nástroje a domácí potřeby, Elektroinstalace, Dráty,

Nainstalujte pomocí vrtáku Apache200 (RC-WA200GTS34) pro snadné provrtání materiálu pomocí vaší akumulátorové vrtačky. Předměty lze snadno vyjmout a vyměnit. Naše patentované WingIts' Fasteners se NIKDY neuvolní. S HRDOU vyrobeno v Americe. NENÍ určeno k instalaci záchytných tyčí. Pro instalaci madla se podívejte na naše další patentované upevňovací prvky: buď rc-ssbgbw40-2 nebo rc-resgbw35-2.
Drive System Phillips
Exterior Finish Stainless Steel
Head Style Flat
Item Dimensions LxWxH 5.5 x 3.6 x 1.6 inches
Material Stainless Steel

3.1

10 Review
5 Star
58
4 Star
15
3 Star
9
2 Star
8
1 Star
10

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: Kev
A truly great anchor!
Standard wing style anchor bolts came with the track lighting I was hanging. I could not get them to tighten well because the wings behind the ceiling would spin freely when I pushed upward against the bolt into the ceiling. I got them as tight as I could and ordered these anchors from Amazon. They came in two days. I was able to replace the other anchors easily and now my track lighting is nice and snug against the ceiling. I have some future projects that I will use these for as well because they are stronger and easier to install than a standard anchor. Well worth the price.
Scritto da: Rose Marie Fortner
Perfect!
Just what I needed! Highly recommend!
Scritto da: JimGO
Secure
Bought these to replace a similar product (sleeve type) that failed. They were easy to install. Note, although the package called for a 3/4" bit, I used a smaller bit then enlarged the hole with a tapered saw blade (by rotating it in a circle within the drilled hole) marked to limit the hole to 3/4" - worked fine. Although plastic, they are big enough to make you confident that they are up to holding a well-built wall cabinet in place securely. The bolts tightened easily to secure the plastic feet to the drywall. FWIW: the bolts held; the drywall didn't.
Scritto da: charles e laber
Did not work.
I bought these to install a wingits grab bar on drywall and it appeared that part of the anchor would show past the edge of the grab bar plate. So I used molly bolts. I should have sent the 2 sets I bought back, but it did not seem worth it.
Scritto da: JP
First One Broke; 2nd One is Holding Brilliantly
Well once I got it mounted into the drywall to hold up my coat rack (which is holding a lot of heavy leather coats) it seems to be VERY strong. The negative comment I have is that I bought 3 sets for multiple uses, and the first WingIt screw I tried broke -the plastic broke as I was trying to insert the second plastic piece as shown on their website video. I am bummed about that, as I will end up a screw short.
Scritto da: Jeff
... in order to get the attachment (winged portion) to suck up against the wall and tighten down
in thick walls you really have to get longer screws and really push the drill in order to get the attachment (winged portion) to suck up against the wall and tighten down. The concept works but the screws provided were not long enough for my application which required a trip to the store which was the point of ordering from Amazon, to avoid doing that!
Scritto da: NJK
No stud, no problem...
I had a 52" grab bar that i was installing in a bathroom for use as a towel bar. I had a stud on one end, but not the other. These worked beautifully. So much better than toggle bolts. I was even able to completely remove the bolts after the initial install and put them back without any problems. It feels very secure.
Scritto da: Kindle Customer
Hard to get screw to catch
Very very hard to install! I would use a different butterfly one. The issue is that you have to be extremely slow and gentle when screwing a screw in, or you may push the piece holding against the wall out. Depending on what you are attaching, this may not be a problem, as long as you have enough screw length to eventually catch in the inside tube. I was attaching a thick piece of wood and needed the full screw length so this became a multi hour project to try and screw it in. Also, no easy way to remove it from the wall. Others, you can just cut and the back price will fall down and you can fill in the hole.
Scritto da: Maitland Blackwell
Holding power
Great product. Used for grab bars
Scritto da: Amazon Customer
que deux vis pour $20.00
bin trop dispendieux

Související produkty

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array