Základní sada vozidla Pitco past na myši (jednotlivé balení) pro 1 studenta

Brand:Pitsco

3.2/5

1457.50

Sada základní past na myši Pitsco Balsa Wood poskytuje studentům 6. až 12. třídy praktickou činnost při navrhování a stavbě modelu auta, které demonstruje vědecké koncepty včetně rychlosti, síly, pohybu a Newtonových fyzikálních zákonů, a učí inženýrský design. Studenti mohou postavit auto ze stavebnice a mohou upravit auto pro lepší výkon a vyšší rychlost. Sada obsahuje past na myši, 12- a 18palcové dlouhé kusy balzového dřeva, standardní kompaktní disky na kola, rozpěrky kol, přítlačné podložky, 12palcové mosazné kusy trubek, ultratenký provázek a návod. Sady Pitco 57034 (balení 10 sad) a 57035 (balení 30 sad) také obsahují kopii příručky, Doc Fizzix's Mousetrap Powered Cars and Boats. Hotové vozidlo měří přibližně 4,5 x 5 x 26,5 palce (V x Š x H). (H je výška, vertikální vzdálenost od nejnižšího k nejvyššímu bodu; W je šířka, horizontální vzdálenost zleva doprava; D je hloubka, horizontální vzdálenost zepředu dozadu.) Souprava vozidla past na myši se obvykle používá ve vzdělávacím prostředí k demonstraci inženýrství a fyziky. Stavba vyžaduje bílé lepidlo, pravítko, hobby nůž, řezačku drátu a vrtačku nebo nářadí Dremel (vše se prodává samostatně). Produkty pro výuku přírodních věd zahrnují aplikované matematické a vědecké principy do projektů ve třídě. Učitelé v předškolních, základních a středních třídách používají sady a produkty pro přírodovědné vzdělávání spolu s učebními osnovami vědy, technologie, inženýrství a matematiky (STEM), aby prostřednictvím praktických činností demonstrovali koncepty STEM a aplikace v reálném světě. Projekty přírodovědného vzdělávání zahrnují širokou škálu aktivit, jako jsou praktické experimenty ve strojírenství, letectví, robotice, energetice, chemii, fyzice, biologii a geologii. Pitsco Education rozvíjí kurikulum pro K-12 vědy, technologie, inženýrství a matematiku (STEM). , vzdělávací sady a učební pomůcky. Společnost, založená v roce 1971, má sídlo v Pittsburgu, KS. Co je v krabici? * Základní sada past na myši Pitsco Balsa Wood * Past na myši (jedna na auto) * Kusy dřeva Balsa (3 na auto) * Kompaktní disky (4 na auto) * Rozpěrky kol (4 na auto) * Podložky (4 na auto) * Mosazné trubky (2 délky na auto) * Ultratenký výplet (1 délka na auto) * Příručka, Doc Fizzix's Mousetrace Powered Cars and Boats (pouze 10 balení a 30 balení) * PokynyPoznámka: Vyobrazená kola nejsou typická, ale jsou příkladem jak studenti mohou malovat a zdobit svá vozidla.

Nejsou k dispozici žádné jednotky
Dokončené vozidlo měří přibližně 4,5 x 5 x 26,5 palce (V x Š x H). Posiluje technologické, inženýrské a matematické koncepty, když studenti upravují auta na základě faktorů, které ovlivňují výkon. Vystavuje studenty procesu návrhu a povzbuzuje je, aby experimentovali a upravovali vozidlo pro větší rychlost nebo vzdálenost. Obsahuje díly potřebné k sestavení vozidla poháněného pastí na myši pro výuku inženýrského designu. Stavebnice dřevěné pasti na myši poskytuje studentům v 6. až 12. ročníku praktickou aktivitu navrhnout, postavit a upravit model auta, který demonstruje vědecké koncepty rychlosti, síly, pohybu a Newtonových fyzikálních zákonů.
Age Range (Description) 12+
Brand Pitsco
Country of Origin USA
Customer Reviews 4.1 4.1 out of 5 stars 202 ratings 4.1 out of 5 stars
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 17.9 x 4.6 x 0.4 inches
Item model number BG57033
Item Weight 0.4 Pounds
Item Weight 6.4 ounces
Manufacturer Pitsco
Product Dimensions 17.9 x 4.6 x 0.4 inches
Size For 1 Student

3.2

8 Review
5 Star
59
4 Star
14
3 Star
15
2 Star
4
1 Star
9

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: Britt
Not the wheels in the image
Clear, flimsy wheels came in this kit. I specifically bought this because I thought the wheels were stronger and looked cool. I was extremely disappointed. The kit is way overpriced for what's with it. The car came together ok with some upgraded wheels.
Scritto da: Jonathon D Leszczynski
This kit works, but you can make it much better with some intelligent improvements.
The directions are great and this is a perfect kit to MODIFY for a racer. Skip using the board you see below the mousetrap as one big board. Instead, glue the mousetrap straight to the two side boards (so the car is as wide as the mousetrap) after you cut off a couple more, mousetrap width pieces, from the big board. Use those additional pieces to stiffen up the frame. Use a pipe cutter to trim the axles and get some nylon washers from the hardware store to fit the axles (I used #10 sized.) The nylon washers help you keep the axles straight. If you really have time, you can drill out a bunch of holes to save weight. I also had some wider CD sized wheels that came from the packaging of 100 packs of DVD's, and those wheels easily accepted a wider rubber band to help provide traction to the drive tires. Also, consider a single front wheel over two, if you can manipulate it.
Scritto da: Mellisa Boan
Science Olympiad parent approved
Bought this for Science Olympiad from seeing other parents using this the year prior. Our child signed up for Mousetrap Vehicle AGAIN! We were not thrilled. Year prior we spent countless hours, days, weeks making the perfect mousetrap vehicle. We built around 3 and our kid’s friends parents build 4 or 5. You could imagine the stress this brought to our family. Well when our kids came home and was so happy about signing up for this endeavor again, we were shocked she didn’t remember the pain and anguish from the last year. I quickly bought this and it was PAINLESS and RELAXING. This is easy and fun, the way it should have been the first time. Instructions are kid friendly. Our 10 years did most of the work. Super convenient!
Scritto da: Jerry Stowers
Fun kit to build!
My daughter had this as a school project so we built it and it worked great, it was a science project about force! She painted it too, great fun!
Scritto da: shoppers voice
It worked. Price is a little high for what it is.
I ordered this on two day shipping, and it came on time for a school project. It was missing one of the plastic CDs, so I just used a junk one that I have. The brand for this product is wrong, this is actually a mousetrap car from DocFizzix.com from years ago, I'd assume that they are just re-branding them and selling off left over stock. As for the quality, its okay. The CDs are flimsy and I recommend using real disks for ease of build. Also I found out that it's actually cheaper to buy this off of their store, for like 15 dollars. After I finally managed to throw it together, it performed okay. This thing works best when you have it on longer and flatter surfaces, unlike my test trials (ie. a shorter hallway and on carpet). So, with all of this considered, I give this a 3/5. Is it worth 20 dollars? No, more like 15, or even 10. I also included some images of the build and the package it came in, some of the images may be poor quality so I apologize.
Scritto da: Mark M.
Good enough for 3rd place out of 25.
My daughter ended up with an 87’ run using this kit for a physics class project. Much simpler than trying to do it from scratch. The resulting car is great for a school project. By design it’s not made to be crashed into a fleet of toy trucks by an 8 year old. It did its job at our home and is destined for the trash can during a cleaning project a year from now ;).
Scritto da: Peter M.
A very worthwhile purchase for the curious minded.
The kit was very well made, and I loved the fact that the holes were predrilled. The instructions would be more helpful if it were a little more in dept, as the last steps were very confusing for me. If you by any chance use this kit for Science Olympiad, then you might face problems with the vehicle not fitting into the even parameters, but this issue could be easily fixed with some modifications. All in all, this was an excellent mousetrap vehicle.
Scritto da: James W Thomas
Sucks.
Wheels don’t stay on. Mousetrap spring broke off. Frame has no support. What a disappointment!

Související produkty

hot
Estes Launch Lug Pack
3.5/5

Kč 998.45

Estes Launch Lug Pack
3.5/5

Kč 998.45

hot

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array