Adaptér 118607 pro předem zapojenou sadu brzdových spojů připravený na tažení

Name: Adaptér 118607 pro předem zapojenou sadu brzdových spojů připravený na tažení
Brand: Tow Ready
SKU: 058914395071
Price: 4488.57 CZK
Availability: InStock

Brand:Tow Ready

3.7/5

Kč
4488.57

Zajistěte bezpečné zastavení při tažení obytného vozu nebo přívěsu na silnici pomocí sady pro ovládání brzd připravené k tažení. Tato sada kabelového adaptéru obsahuje kulatý, předem zapojený 7cestný konektor a 4-plochý konec pneumatiky. S touto sadou Brake Make snížíte opotřebení brzd vašeho vozidla. Bez ovladače brzd se mohou brzdy a pneumatiky na přívěsu zablokovat, když ve vozidle sešlápnete brzdu, což vede k nejrůznějším problémům. Tato sada proporcionálního brzdového ovladače má vše, co potřebujete k bezpečnému zastavení při tažení obytného vozu nebo přívěsu. Sada kabeláže pro ovládání brzd připravená k tažení obsahuje 5 zámků, 8 samořezných šroubů, kroužkové spojky, pojistky pro velká zatížení, vázací pásky a další, aby byl proces instalace hladký a jednoduchý.

Množství

Přidat do košíku Kup nyní

EAN: 058914395071

Kategorie Automobilový průmysl, Příslušenství pro exteriér, Tažné zařízení a navijáky, Spojky na přívěs Příslušenství, Kabeláž,

INSTALACE OVLÁDÁNÍ ELEKTRICKÝCH BRZD: Nainstalujte ovládací prvky elektrické brzdy rychle a snadno pomocí soupravy pro výrobu brzd připravené k tažení.

Brand	‎Tow Ready
Country of Origin	‎Taiwan
Customer Reviews	4.6 4.6 out of 5 stars 92 ratings 4.6 out of 5 stars
Exterior	‎Painted
Is Discontinued By Manufacturer	‎No
Item model number	‎118607
Item Weight	‎0.01 ounces
Manufacturer	‎Draw-Tite
Manufacturer Part Number	‎118607
Model	‎Draw-Tite 118607
OEM Part Number	‎DJSK118607
Product Dimensions	‎8.5 x 2.4 x 10.9 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena^*

Vase hodnoceni

Scritto da: super dad

Great product

Great product A + shipping was fast

Scritto da: Nick

Wire isn’t long enough

Once installed it works great. Was supposed to be suitable for a 2016 Chrysler Town and Country. The wire was short by about 6 feet. Had to buy additional wire elsewhere. Other than that, no complaints

Scritto da: RoninUT

Exactly what you need if your vehicle already has a 4 way flat trailer plug.

This kit included everything I needed to install a trailer brake controller in my Jeep. I already had the 4 way flat plug but needed the 7 way plug with power and brake wires to keep the trailer batteries charged, and to operate the trailer brakes. Installation is pretty straightforward. The kit includes a few zip ties, but I ordered some much bigger ones to strap the cable to my frame rails. After watching a few videos online I was able to install it using their suggestions for locating the circuit breakers. The hardest part of the whole installation is tapping the brake signal wire. It is in a very difficult location in my vehicle. But since this kit will work with any vehicle with a 4 way flat plug, your installation might go easier. I wish it included some wire loom and some bigger zip ties (and more of them). But otherwise it's a great kit. Probably the best available.

Scritto da: Greg Thompson

Works fine on my 2009 Subaru Forester

Took me a few hours to run the cables and get it all working, but long enough to make it all the way to the engine bay with some to spare. I ran it mostly inside along the door channel. Well made. You do have to have a multi-meter and some experience with wiring diagrams. I'm sure I saved several hundred dollars doing it myself.

Scritto da: Landen Green

Makes it quick and easy

There is plenty of length on a regular cab long bed truck to go from the back to under the hood and into the cab with the duplex wire. I followed the factory harness along the frame rail to under the hood by the PDC, mounted the breakers there, and then went into the cab. For a longer truck, additional wire would be needed. I skipped the electrical terminals and scotch locks the kit comes with and used crimp connectors with built in marine heat shrink for a better result. I made a bracket to hold the 7 way to the back bumper, and it's ready to go. Will definitely buy this kit again. Directions are straight forward and easy to understand.

Scritto da: TrailingEdge

Pretty good but not perfect

The package only has 2 large ring terminals, but you need 3 in order to install a brake controller (1 on negative battery post and 2 on positive battery post). So now I need to go to AutoZone to buy a new one. Also, the wires are a little short and I didn't have enough leftover wire for one of the breaker-to-battery wires. I pieced together a long enough wire but not ideal.

Scritto da: T

Worked like a charm

great kit!

Scritto da: Chris Thompson

Easy to install

Instructions were clear and concise

Scritto da: tr

need bracket and more tie wraps

good quality product! i had enough wire for my jeep liberty therefor didn't need to buy more. i did need to buy more tie wraps, and a bracket to attach the 7 way. although i had to buy these things (which in all fairness could have been included for that price) what i really was hoping for was some instructions. eventully figured it out though researching online. But i will repeat, good quality!