CURT 56147 Vlastní 4kolíkový kabelový svazek návěsu na straně vozidla, pasuje na vybranou Toyotu Prius

Brand:CURT

3.8/5

2542.96

KRYT PROTI PRACHU. Pro podporu dlouhodobého používání a odolnosti vůči povětrnostním vlivům je tento 4pólový kabelový svazek pro osvětlení přívěsu dodáván s pryžovým protiprachovým krytem. Když se nepoužívá, snadno se hodí na 4cestný plochý konektor a chrání jej před vnějšími vlivy. SPOLEHLIVÝ VÝKON. Tento 4cestný kabelový svazek přívěsu je vyroben technologií povrchové montáže. Tento typ obvodů generuje méně tepla, optimální intenzitu světla a trvanlivý výkon. SPECIFICKÉ VOZIDLO. Tento kabelový svazek vozidla-návěs pro trh s náhradními díly je navržen pro vybrané roky modelu Toyota Prius. STANDARDNÍ KONEKTOR. Tuto zásuvnou 4-plochou kabeláž přívěsu lze použít k připojení koncových světel přívěsu, brzdových světel a směrových světel. 4cestná kabeláž osvětlení přívěsu je oblíbená u různých přívěsů a přidává všestranné možnosti tažení vašeho vozidla. SNADNÁ INSTALACE. Žádné řezání! Žádné spojování! Tato sada kabelového svazku přívěsu se zapojuje do stávající tovární kabeláže na vašem vozidle a vybavuje jej standardním zadním 4kolíkovým konektorem kabeláže přívěsu pro připojení a tažení přívěsu.

Nejsou k dispozici žádné jednotky
KRYT PROTI PRACHU. Pro podporu dlouhodobého používání a odolnosti vůči povětrnostním vlivům je tento 4pólový kabelový svazek pro osvětlení přívěsu dodáván s pryžovým protiprachovým krytem. Když se nepoužívá, snadno se hodí na 4cestný plochý konektor a chrání jej před vnějšími vlivy. SPOLEHLIVÝ VÝKON. Tento 4cestný kabelový svazek přívěsu je vyroben technologií povrchové montáže. Tento typ obvodů generuje méně tepla, optimální intenzitu světla a trvanlivý výkon. SPECIFICKÉ VOZIDLO. Tento kabelový svazek vozidla-návěs pro trh s náhradními díly je navržen pro vybrané roky modelu Toyota Prius. STANDARDNÍ KONEKTOR. Tuto zásuvnou 4-plochou kabeláž přívěsu lze použít k připojení koncových světel přívěsu, brzdových světel a směrových světel. 4cestná kabeláž osvětlení přívěsu je oblíbená u různých přívěsů a přidává všestranné možnosti tažení vašeho vozidla. SNADNÁ INSTALACE. Žádné řezání! Žádné spojování! Tato sada kabelového svazku přívěsu se zapojuje do stávající tovární kabeláže na vašem vozidle a vybavuje jej standardním zadním 4kolíkovým konektorem kabeláže přívěsu pro připojení a tažení přívěsu.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 327 ratings 4.7 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 6 x 3 inches
Item model number ‎56147
Item Weight ‎1.04 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56147
Material Rubber
Model ‎56147
OEM Part Number ‎56147
Product Dimensions ‎9 x 6 x 3 inches

3.8

10 Review
5 Star
86
4 Star
9
3 Star
1
2 Star
2
1 Star
2

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: Tim
Plug and play
Very easy to install, just follow the directions and route the wires correctly. You have to remove quite a few body panels if you want the wires fully hidden so I’d recommend a panel trim tool
Scritto da: charles
Works great
Easy installation and works exactly as described
Scritto da: TKJ
Curt products are good
Good product
Scritto da: Manila Mike
Simple Satisfaction
I'm just glad for everyone who decides to put a hitch and trailer hookup on their Prius! This certainly will not answer every hauling need but it will help save fuel and money with quite a few. Great instructions with pictures specific to my car made it easy to install this wiring harness in my 2010 Prius Five. There was plenty of wire to reach all the places needed to plug it in. The directions suggest finding a screw for attaching the ground terminal but I could not really locate any that would work in the area so took it directly to the negative side of the battery. Installation took close to half-an-hour. I opted not to run mine out through the rubber drain plug under the spare tire as I could already see a little corrosion built up there. I wanted to keep the plug end and the underside of the spare nice and clean. Instead, I just run it out the hatch door when I use it. It pinches firmly enough in the rubber gasket to hold it in place but not too much to damage the wire. I do need to remember to stay clear of the latch in the middle when I feed it out toward my trailer tongue. It was such a great feeling of satisfaction when I plugged this into my trailer lights and everything worked the way it should. If only all of life could be as simple and fulfilling.
Scritto da: Dave
Works nice
Very easy kit to install on your Prius, works well. I have a 2010 Prius III with 185k on it. I've used this kit and the Curt Receiver and hitch kit 112763 and Curt ball 40003. I towed a 2040lbs trailer with 300-400lbs tongue which was very overloaded on the tongue. I even hit a nasty dip in a parking lot at 10-20mph and didn't seem to bend anything. Can cruise at 65mph with my oversized AT tires and 1.5" lift. You definitely feel the trailer back there and it does push you but it's pretty much a 90's Ford Ranger. The only problems I had towing were possibly drastically increased oil consumption and a very random burning smell coming from the AC, which I couldn't really figure out.
Scritto da: Bill Foster
Installed on my 2007 toyota prius
This was very fast to install (10-15) mins max. If you're handy you'll have no problems putting this on your prius. I'm very happy with the purchase and can't wait to make use of this in the future.
Scritto da: Amazon Customer
good idea but poor quality
Apparently this article has been in the warehouse for too long, the tapes did not work, the rubber pairs to protect the fuse and connectors, everything was broken. Either it is very old or it is of poor quality. north
Scritto da: Jane M.
Works well, Reese might be slightly easier install
Curt 56147 Prius trailer lights harness. Install was easy enough and it works as it should. Packing it efficiently into the space instructed was a PIA but it's in there. There really isn't a goid place to adhere the module as the wire stiffness over powers the double sided mounting pad so I just wrapped and taped it with poly foam and carefully tucked it in there. The connectors were easy to use. I don't think the Reese unit requires a separate power source direct to the battery which required removing some covers and brackets, not a huge problem,but time consuming. The room for attaching the ground lead I'd very limited so I drilled a pilot hole with a drill bit b4 using the self tapper, saved some hassle getting it to start
Scritto da: Andrew Sinclair
Worked great on 2008 Prius
Very easy install on my 2008 prius.
Scritto da: Serge L
Connecteur Prius bon produit
Très bon produit

Související produkty

hot
AP Products 014-122106 Ekvalizér
3.4/5

Kč 1200.15

AP Products 014-122106 Ekvalizér
3.4/5

Kč 1200.15

hot

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array