Držák na stěnu Leonardo Bike Rack od Delta Cycle – Elegantní design vertikálního závěsného háku poskytuje snadný přístup k uskladnění jízdních kol – Bezproblémová instalace – Vertikální držák pojme až 40 lb Fat Tire Bike Hook

Name: Držák na stěnu Leonardo Bike Rack od Delta Cycle – Elegantní design vertikálního závěsného háku poskytuje snadný přístup k uskladnění jízdních kol – Bezproblémová instalace – Vertikální držák pojme až 40 lb Fat Tire Bike Hook
Brand: ‎Delta Cycle & Home
SKU: 0799403299400
Price: 1600.23 CZK
Availability: InStock

Brand:‎Delta Cycle & Home

3.5/5

Kč
1600.23

Jízda na kole jako způsob dopravy a klidu by neměla znamenat obětování podlahové plochy pro umístění vašeho vybavení. Díky prostorově úspornému vertikálnímu půdorysu a patentovanému designu háku na kolo je vaše kolo bezpečně uloženo nad podlahou u jakékoli zdi. Ideální pro váš byt, domov nebo garáž, nástěnný držák na jedno kolo Leonardo lze namontovat na jakýkoli nástěnný kolík s přiloženým hardwarem pro snadné řešení pro uložení kol. Tento držák na kolo je navržen tak, aby vyhovoval jakémukoli stylu kol, unese jedno kolo až do hmotnosti 40 liber s pneumatikami. měření pod 2,5”. Pro kola Fat Tire vyberte nástěnný stojan na jedno kolo pro Fat Tires. Díky modernímu designu, který obsahuje protiskluzový pogumovaný háček na kolo pro ochranu ráfku pneumatiky, můžete přidat eleganci A úložný prostor do každé místnosti. Snadná instalace přihrádky na pneumatiky odlupováním a přilepením umožňuje vlastní umístění a zároveň udržuje vaši stěnu bez škrábanců a chrání ráfek a povrch pneumatiky. Jako důvěryhodný lídr v oblasti skladování kol více než 1 milion cyklistů důvěřuje svému kolu v háčky na kola Leonardo. Navrženo a zkonstruováno v USA se zákaznickou podporou se sídlem v USA, naším cílem je poskytovat zákazníkům A+ zkušenost.

Množství

Přidat do košíku Kup nyní

EAN: 0799403299400

Kategorie Sport a outdoor, Sport a fitness, Cyklistika, Nosiče na auta, Přeprava a skladování, Kryté úložné prostory na kola,

Značka, které důvěřujete. Příslušenství, které potřebujete: Již více než 30 let je Delta značkou, které můžete důvěřovat díky americkému designu a konstrukci. Naše malá, koncentrovaná produktová řada odráží pečlivé myšlení a odhodlání investované do každého produktu, který vytvoříme. Kvalitní konstrukce: Tento produkt je vyroben z odolné oceli s práškovým nástřikem a na zakázku tvarovaného krytu. Stylový povrch: Moderní design tohoto stříbrného háku vypadá dobře v každé místnosti nebo garáži. Bezpečnost především: Zásobník na pneumatiky zajišťuje zadní kolo a chrání vaši stěnu. Moderní a čisté úložiště kol: Uložte téměř jakékoli kolo pomocí nástěnného háku na jedno kolo Delta Cycle Leonardo Fat Tire. Je kompatibilní s tlustými pneumatikami a pojme jedno kolo s šířkou ráfku až 3,5” a šířkou pláště 5”. Udrží až 50 liber. 11" x 3,5" x 5".

Assembly Required	‎Yes
Batteries Included?	‎No
Batteries Required?	‎No
Brand	‎Delta Cycle & Home
Color	Fat Tire Bike Hook
Color	‎Fat Tire Bike Hook
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 245 ratings 4.4 out of 5 stars
Finish	‎Powder Coated
Finish Type	‎Powder Coated
Included Components	‎Fat tire rack
Is Discontinued By Manufacturer	‎No
Item model number	‎RS4008C
Item Package Quantity	‎1
Item Weight	‎0.4 Pounds
Item Weight	‎6.4 ounces
Manufacturer	‎Delta Cycle Corp
Material	Alloy Steel
Material	‎Alloy Steel
Mounting Type	‎Wall Mount
Number Of Pieces	‎1
Number of Shelves	1
Number of Shelves	‎1
Part Number	‎RS4008C
Product Dimensions	5.5"D x 5.4"W x 4.7"H
Product Dimensions	‎5.4 x 5.5 x 4.7 inches
Product Dimensions	‎5.5"D x 5.4"W x 4.7"H
Room Type	‎Office
Size	‎Fat Tire
Special Feature	Durable, Space saving
Special Feature	‎Durable, Space saving
Special Features	‎Durable, Space saving
Style	‎Fat Tire Bike Hook
Usage	‎x

5 Star

4 Star

3 Star

2 Star

1 Star

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena^*

Vase hodnoceni

Scritto da: T. Patton

Lacks Sturdiness

First time I hung bike, the top wall screw snapped in half. Books feels a little too flexible. May be good for light weight street bikes, but a little flimsy for a heavier fat tire mountain bike. Next time I'll probably go with a sturdier one for peace of mind.

Scritto da: Amazon shopper

Hook is great, plastic rear wheel holder is brittle

The plastic piece for the rear wheel cracked a little bit the first time I used it in the cold.

Scritto da: Brandon & Cacia

Good wall mount

This is a pretty good wall mount, easy installation, holds bike well. My only complaint is the crappy adhesive strip on the lower tray and the fact that there isn't a pre-drilled hole on the lower tray. I have the rack installed on a naked stud and every time the rear wall hits the lower tray at an angle other than straight on, it pops the tray off. Finally drilled it out and screwed it to the stud. Much better.

Scritto da: J. Shyloski

Works well with balloon tires on cruiser bike.

Mostly upsides and happy. The red covering is a length of plastic sleeve. It may or may not last, but should be relatively easy to replace if/when it gets chewed up. Clear wall protector for bottom tire is discreet but seems like it could be a deeper trough; doesn't hold tire securely against bumps. Also, self-adhesive will likely to more damage to wall finish on removal; suggest using short screws -- there's not a lot of stress on the part.

Scritto da: Ferrstein

Very well made and sturdy. I use these with mountain bikes as well ...

Very well made and sturdy. I use these with mountain bikes as well as fat bikes. Do make sure you have a solid mounting surface. I used a 2x8 "cleat" on the wall and in my case ran a couple returns to the floor. I only did this because my walls are 100 year old clay tile and a toggle or Tapcon will not hold. Most folks should be able to simply attach the hooks directly into a stud or install a cleat similar to mine to the studs and then mount these. Well worth the effort - these freed up a bunch of space in my basement!

Scritto da: Amazon Customer

Must mount to wall stud.

After reading many reviews of bike racks this one looked to be the most sturdy. It lived up to my expectations and holds my fat tire bike securely to the wall. Due to the nature of how this rack works it's imperative to mount it to a wall stud. Using a drywall anchor will most likely fail over time.

Scritto da: Nate Schwartz

Awesome bike rack

This bike rack is awesome. The fat bike one is honestly better than the original in my opinion. They are super easy to hang but the fat bike one is easier to get your bike on and I prefer the galvanized look. Perfect for hanging bikes and getting them out of the way.

Scritto da: Dylan Meadows

Missing Parts

So I know that when you buy this new you get four screws and four washers. I bought this used and it came with only two screws and no washers. I will have to go by the hardware store after work today to get the extra parts.

Scritto da: CS

Very poor description - great product.

Why this is listed as a "woman's" bike rack I cannot understand. But Amazon seems to have a problem with gender (I bought a "unisex" knife the other day!). I don't know why it is so hard to find a good bike rack, I had ones where the hook part is hinged so you have to lift the hook with one hand while lifting the bike with the other, even those that say they fit MTB tyres don't. I use this for my MTB with 2" tyres, works great.

Scritto da: Iem

Calidad y precio excelentes

La foto de la publicación me hizo dudar un poco la compra pero el tono en que llegó me gustó mucho, por lo que debería decir que la foto no corresponde con el producto y es algo que debería corregirse, en cuanto a materia la parte superior es de metal y parece de buena resistencia y la parte de abajo es de plástico que parece igual muy resistente, me gustó mucho

Scritto da: Guy L

Only fatbike hanger I could find but does the job

This hanger seems like good quality. I gave 4 stars because with my 27.5in wheels and 4.5in wide winter tires it was too thick to hang on the hook, I had to cut about an inch of the hook to be able to install my wheel on it. I also drilled through the plastic thingy for the rear wheel to put a screw because I didn't trust the sticker (not 3M)

Scritto da: Kardnal

Very well built.

What arrived was very well built. (Though different in colour than the images pictures. Much darker metal, and rubber guard on the hook.) The mounting screws were serious hardware. Installation was a snap. Must install it into a stud though. I wouldn’t trust a bike hanging from this with just anchors in drywall.

Scritto da: Hannah Connon

Does indeed hold a fat tire

Can confirm, this rack does indeed hold a fat tire. I have a 2017 Norco Bigfoot with 4.7 or even 4.8 inch tires and it fits fine. Put it up 2 weeks ago and my bike is still secured firmly to the wall. You absolutely have to hang this on studs, do not even attempt drywall. The only reason I took 1 star off was because the rack left a lot of marks on my freshly renovated/painted wall. It is coated in something that leaves scuffs marks just by touching the wall. Might be an issue if you are looking to hang your bike inside your house. Also, the picture of the tray makes it look like it screws into your wall, but it is a peel and stick, fyi.