GOOACC 5gangový kolébkový spínačový panel modře podsvícený s 4,8 A voltmetrem s duální USB nabíječkou Vodotěsný kolébkový spínač 12V 24V DC s nočním svícením Samolepky pro osobní automobily, čluny, RV, záruka 2 roky

Name: GOOACC 5gangový kolébkový spínačový panel modře podsvícený s 4,8 A voltmetrem s duální USB nabíječkou Vodotěsný kolébkový spínač 12V 24V DC s nočním svícením Samolepky pro osobní automobily, čluny, RV, záruka 2 roky
Brand: GOOACC
SKU: 0840323901079
Price: 1740.75 CZK
Availability: InStock

Brand:GOOACC

3.8/5

Kč
1740.75

GOOACC Multifunkční 5-násobný přepínač Panel Kolébkový přepínač: Podsvícení: Modré Vstupní napětí: 12V/24V DC Přepínač Terminál: 5 PIN Instalace: Montáž na panel, Předem zapojená Duální USB nabíječka: Výstupní napětí: 5V DC Výstupní proud: 4,8A (2,4 A 2,4A) Voltmetr: Způsob zobrazení: LED. Rozsah měření: 12V-24V DC. Poznámka: Jmenovitý proud pro KAŽDÝ PŘEPÍNAČ: 12V DC/20AMP; 24V DC/10AMP. Zapojte relé, pokud se chystáte připojit příslušenství, které má více než 20 AMP na zdroj 12 V DC. Nebo se spínač spálí kvůli vysokému proudu. Spínací panely GOOACC 5 gang lze použít k ovládání LED světelných lišt, LED pracovních světlometů, zadních světel, mlhových světlometů, dálkových světel, světlometů, zadních světel, terénních světel, přídavných světel, lodních světel atd. Vybaveno nálepkou můžete definovat název a přiřadit přepínače podle vašich potřeb. Produkt je vhodný pro většinu automobilů, SUV, čtyřkolek, UTV, 4X4, motocyklů, nákladních automobilů, Wranglerů, lodí, jachet a dalších terénních vozidel.

Nejsou k dispozici žádné jednotky

EAN: 0840323901079

Kategorie Sport a outdoor, Sport a fitness, Jachting a plachtění, Čluny a vybavení, Elektrické vybavení, Kolébka Přepínače,

Balení obsahuje: 1x 5-segmentový spínací panel, 4x upevňovací šrouby, 2 sady samolepek. Zajištění kvality: panel je vyroben ze zesíleného hliníku a dobře vodivých kolíků, zajišťuje dlouhodobou odolnost vysoce optimalizovanou pro všeobecné použití a poskytne vám příjemný zážitek. LED displej napětí: voltmetr je zabudován ve středu USB nabíječky, jasně ukazuje aktuální hodnoty pracovních voltů, snadno si všimnete stavu napětí vozidel. Efektivní nabíjení: duální USB nabíječka umožňuje nabíjet dvě zařízení současně plnou rychlostí s 2,4a v každém portu USB. s celkovým výkonem 4,8A funguje pro všechna zařízení napájená přes USB. Díky tomu je nabíječka o 40 % rychlejší než běžné nabíječky. Multifunkční design: tento přepínací panel je integrován s 5 kolébkovými spínači a 4,8A duální USB nabíječkou s voltmetrem. vhodné pro většinu 12v-24v dc automobilů, utv, čtyřkolek, nákladních automobilů, přívěsů, rv, karavanů, autobusů, námořních člunů, jachet atd.

Actuator Type	Rocker
Actuator Type	‎Rocker
Brand	GOOACC
Brand	‎GOOACC
Color	‎Blue
Connector Type	Usb
Connector Type	‎Usb
Country of Origin	‎China
Current Rating	4.8 Amps
Current Rating	‎4.8 Amps
Customer Reviews	4.7 4.7 out of 5 stars 25 ratings 4.7 out of 5 stars
Exterior	‎Painted
International Protection Rating	IP54
International Protection Rating	‎IP54
Item model number	‎Switch 138B
Item Weight	‎12 ounces
Manufacturer	‎GOOACC
Manufacturer Part Number	‎Switch 138B
Material	Aluminum
Material	‎Aluminum
Model	‎Switch 138B
Mounting Type	Panel Mount
Mounting Type	‎Panel Mount
Number of Items	‎1
Number of Positions	2
Number of Positions	‎2
Operating Voltage	24 Volts
Operating Voltage	‎24 Volts
Package Dimensions	‎7.52 x 4.09 x 3.23 inches
Switch Type	Rocker
Switch Type	‎Rocker
Unit Count	‎1.0 Count

5 Star

4 Star

3 Star

2 Star

1 Star

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena^*

Vase hodnoceni

Scritto da: RadRafael

Good for the value. Can't compare it to pro grade products

Overall these are a decent rocker switch panel. You can't compare or expect them to perform like some of the way more expensive pro grade models out there but they aren't priced in their range either. These are not individually fused or waterproof like the others but again, we are talking value here. For what they are, these are a great set. They provide a simple value based solution to a need for multiple rocker switch needs. Make absolutely sure you put a fuse on this thing and remember to keep spares because one fuse for them all will make everything inop if you blow a fuse.

Scritto da: LitlJay

Nice switch panel

This panel is good for almost any project, from a hot rod to an RV to a boat. It comes with a HUGE variety of labels for any imaginable application and the lights look good. It has a pretty good power capacity, but I suggest using relays for any higher-powered devices, essentially anything bigger than a light bulb.

Scritto da: C. Cox

New control center

Very glad to install this 6-place panel in my UTV dash! The green lights are easy on the eyes and match the body color of the ATV. The USB outlets have been a nice extra (with a voltmeter to let me know I'm not drawing the battery down too much in accessory mode). Cutting a hole in the dash was well worth it - thankfully the panel surround meant that I didn't have to be absolutely meticulous with my cuts. Wiring to the ignition switch was easy, I did change out one of the provided rocker switches for a dedicated GOOACC winch switch (3-way: in, out, and off). Also currently wired: Headlights, back up lights, and a sprayer control (on-off) which I had previously managed with a wireless remote. That leaves one for an undetermined future application.

Scritto da: fluffy

Great for all my RGB LEDs

Dash RGB trim, under-dash RGB mood lights, underbody glow, under hood glow, it's starting to get ridiculous. Well, on my beater, even more ridiculous. I wired everything up through this so I can turn off the potentially illegal LEDs when I'm feeling more pedestrian and it also gives me a nice VDC readout which helps me keep an eye on my hot-wired alternator. Yeah, I'm kind of abusing my electrical engineering abilities. Anyway, this switch panel is top notch. Seriously, you could forego relays with how robust these wires are and the build quality is outstanding. This is the kind of panel you'd find in NASA built command consoles.

Scritto da: Devolu

Easy install, great look new or older vehicle and easy for custom installs

It is hard to find more than the one issue that I have with these rockers. The mount is solid aluminum and the rockers are easy to remove but sit well when installed. The wiring comes installed out of the box. I used a relay to provide power through. The one complaint I have is personal. I prefer my accessory lighting to not need the vehicle key on to utilize and wiring it that way leaves a green (because I ordered the green lights to match my paint) glow in the cabin at night. They do not draw enough current to drain the battery, but the slim light letting you easily find the switches stays on all the time. I currently have a small spot/flood light bar above my winch, 2 bumper spot/floods, 2 floods facing the sides and two floods on the rear bumper. They are all LED and I have had 4 of the 5 switches on at the same time with no issues of heat or current draw, which you can monitor the current draw through the quite accurate voltage display in the center of the USB port. Having a dual USB that doesn't sit in a cigarette lighter or hidden in some hard to access place is worth the effort to install this panel. I installed mine in an overhead console and as the pictures show, it looks clean and neat. The provided stickers are either symbol or nautical, but I found enough to identify which switch activates which lights. The recommended gauge wire for installing is 16. Because of the long routing I stepped it up to 14 but I am nor familiar with the characteristics of LED lights as I grew up using 140W incandescent that would cook a 25A switch if you didn't use a relay so that part may have been overkill, but it makes me feel safer.

Scritto da: devildawg

Nice compact solution to adding controled curcuits to any project

This is a nice compact solution to adding multiple additional circuits to your project. It is built very solidly and makes for a clean and professional-looking installation. Additionally, the provided stickers make each toggle easily known at a glance. And it's nice to have 2 USB A charging ports. Being a volunteer firefighter, I have had to add several things to my vehicle to respond to fires. With this module, I can easily control every aspect of the lights installed as well as my siren module. I am able to control areas of lighting for specific situations, be it responding, providing traffic control and lessening the overall load on my battery and alternator. The two main things that would make this even better is to have a fuse on each toggle. It will be best to run power to this, being multiple toggles, direct from the battery and you will have to put an in-line fuse for protection anyway but to have each toggle separately fused would add more protection and allow you to control the amperage to each individually. Plus, if they were individually fused, if a the fuse blew, you would not lose all toggles and still be able to control them.