0
0

Celkový:Kč 0.00

Viz košíkPřekontrolovat
LoginRegister
0

Celkový:Kč 0.00

Viz košíkPřekontrolovat
LoginRegister

HHIP 2420-0320 F320 adaptér brusného kotouče F320-US standardní Sopko styl

Brand:HHIP

3.4/5

Kč
2812.83

Adaptér brusného kotouče F320 ~ Používá se ve válci standardních brusek v USA. ~ Kalené a broušené. ~ Pro 1-1/4 I. D. brusné kotouče. ~ Kapacita šířky kola je 1/4 až 3/4. ~ 1 průměr na velkém konci kuželového otvoru. ~ Vyrobeno na Tchaj-wanu. ~ Styl Sopko. ~ Levé závity. ~ Závit je 1-1/4-16 LH. ~ Tvrdost je 20-25 HRC.

Množství
Přidat do košíkuKup nyní

EAN: 0769053011400

Kategorie Průmysl a věda, Brusivo a dokončovací materiály, Brusné příslušenství, Adaptéry pro kola,

Kalené a broušené. 1 průměr na velkém konci kužele. Tepelně upravené ořechy; Pro 1-1/4 I. D. kola. 1 průměr na velkém konci kužele; 1 průměr na velkém konci kužele.
Brand HHIP
Construction Type Coated
Country of Origin Taiwan
Grit Number 60
Item Dimensions LxWxH 4 x 2 x 4 inches
Item model number 2420-0320
Manufacturer ABS Import Tools Inc.
Product Dimensions 1"L x 1"W
Product Dimensions 4 x 2 x 4 inches; 12.7 Ounces

3.4

7 Review
5 Star
57
4 Star
21
3 Star
22
2 Star
0
1 Star
0

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: Billy Taylor
Surface grinder wheel hub
I had seen some reviews that said this was a cheap Chinese. If it is their quality has definitely improved. The finish on this thing was second to none. Everything is smooth burr free and fits. Absolutely beautiful run out was less than 1/10000 of an inch. I have purchased some US-made used ones off of eBay and paid more for them than this one and this one is hands-down better quality.
Scritto da: Robert L. Ginther
Good, Not Great
Unit was steel & not aluminum -- good. Taper inside unit was full, not segmented like a Sopko. Taper doesn't lock well or with much precision. Also Sopko's have spanner holes in the rear & HHIP does not. How to tighten the wheel without them so it can be balanced? Flanges did run true & were 2 ten thou tighter to the wheel than Sopkos. Will use for my non-precision surfacing sinceI have blued them & lapped the tapers to fit. Sorry, but the extra money for Sopko adapters are worth it.
Scritto da: Bruce A Reed
Doesn't accept a 3/4" thick wheel as described.
I bought this for a 3/4" wheel and when installed has only two threads protruding past the wheel to screw into the nut. Not adequate or safe. It's good for up to 1/2" wheels.
Scritto da: Tom B
Reasonably priced wheel adaptor
About half the price of a the name brand. Well made, nice finish. Fits my surface grinder and work very well.
Scritto da: ely
It works
The taper was a little sloppy but usable for the price I only paid 13 dollars but I see the price is quite a bit more now
Scritto da: Karl R.
Grinding wheel adapter
The grinding wheel adapter arrived quickly and fits well on the machine arbor. Good deal.
Scritto da: Jeanne H
Nicely machined, good value
Taper fits my Boyer-Schultz 612 perfectly. Adapter is well made and as good as the factory adapter. My only complaint, and it's a small one, is the threaded section used for removal is slightly larger than the original. Though a standard removal tool will probably work, you should make one up with a better fit to avoid long term damage to the threads of the adapter or tool.

Související produkty

hot
HHIP 2420-0320 F320 adaptér brusného kotouče F320-US standardní Sopko styl
3.4/5

Kč 2812.83

HHIP 2420-0320 F320 adaptér brusného kotouče F320-US standardní Sopko styl
3.4/5

Kč 2812.83

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array

Celkový:Kč 0.00

Viz košíkPřekontrolovat

Kategorie

Všechny kategorie
Jídelní lístek Kategorie U Vozík

Menu