Sada pneumatické sešívačky na čalounění Surebonder 9600B typu T-50 s 6 250 sponkami, 1/4 palce - 9/16 palce, včetně přepravního pouzdra (nutný vzduchový kompresor, ale není součástí dodávky)

Brand:Surebonder

3.8/5

2073.71

Vezměte prosím na vědomí, že tento nástroj potřebuje ke svému provozu vzduchový kompresor. Vzduchový kompresor se nedodává s nářadím/sadou. Tato uživatelsky přívětivá a lehká vzduchem poháněná sešívačka je nutností pro domácí kutily. Své projekty nebo opravy zvládnete dokončit za polovinu času a budete se u toho bavit. V této sadě obdržíte 1250 sponek každé různé délky: 1/4, 5/16, 3/8, 1/2 a 9/16. Jedná se o sponky Surebonder #4 standardní velikosti pro vysoké zatížení, stejné jako sponky typu Arrow T50. Sada také obsahuje pouzdro na přenášení s vysokým nárazem, imbusový klíč, malou lahvičku s olejem na nářadí a snadno dosažitelné pokyny k obsluze. Aplikace jsou nekonečné - zde je několik; čalounění, izolace, opravy obrazovek, dřevoobráběcí projekty, opravy oplocení. Mezi standardní funkce patří: bezpečnostní mechanismus, který zabraňuje náhodnému výstřelu, nastavitelný výfuk vzduchu, gumová čalouněná rukojeť pro pohodlí, zásobník s rychloupínáním pro snadné vkládání svorek, prohlížeč svorek a 1/4 rychloupínací konektor. (Potřebný vzduchový kompresor, ale není součástí dodávky). Použijte vzduchovou hadici, která odolá alespoň 150 psi, NEBO 150 % maximálního tlaku kompresoru. Nikdy nepřipojujte tento nástroj ke stlačenému vzduchu, pokud by tlak mohl překročit 200 psi, protože by sešívačka mohla prasknout.

Nejsou k dispozici žádné jednotky
ZAHRNUTO KUFRE – Vaše nová sešívací pistole je nyní dodávána v odolném přepravním kufříku, který umožňuje skvělé skladování, když nástroj nepoužíváte. Kufr obsahuje pneumatickou sponkovačku 9600B, 6 250 spon v 5 různých délkách, imbusový klíč, lahvičku oleje na nářadí a návod k obsluze. APLIKACE - Tato sešívací pistole může být použita pro různé projekty, včetně zadních stěn skříněk, plsti skříněk, čalounění koberců, opravy dveří se zástěnami, projektů malého nábytku, izolace, střešní lepenky, domácích obalů, obložení automobilů a námořních vinylů, lehkých úprav, lišty, obrazové rámy, obecné použití sešívačky a další. VLASTNOSTI - Průhledné okénko sponek, nastavitelný výfukový otvor, snadné vkládání svorek, gumová pohodlná rukojeť a vystřelovací bezpečnostní mechanismus pro zvýšenou ochranu. ZAHRNUTO 6 250 SPOJEK - Sada obsahuje 1 250 kusů každé z následujících délek nohou: 1/4, 5/16, 3/8, 1/2 a 9/16. Tyto sponky jsou také kompatibilní se sešívačkou Surebonder Triggerfire a sešívačkou Arrow T-50. VZDUCHOVÝ KOMPRESOR POTŘEBNÝ NENÍ SOUČÁSTÍ SOUČÁSTI - K provozu nářadí je nutný vzduchový kompresor. Vzduchový kompresor není součástí této sady. Rozsah PSI pro tuto sešívací pistoli je 60-100 PSI. NEPŘESAHUJTE 100 PSI.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Surebonder
Color Silver, Light Green, Black
Color ‎Silver, Light Green, Black
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 1,660 ratings 4.7 out of 5 stars
Included Components ‎Staple Gun, Staples, Case
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10 x 2 x 6.75 inches
Item model number ‎9600BKA
Item Package Quantity ‎1
Item Weight ‎5.59 pounds
Manufacturer ‎FPC CORPORATION
Material Metal
Material ‎Metal
Measurement System ‎inch
Number of Fasteners 6250
Number of Handles ‎1
Part Number ‎9600AKA
Product Dimensions ‎10 x 2 x 6.75 inches
Size ‎1/4-Inch - 9/16-Inch
Style ‎Heavy Duty
Warranty Description ‎90 Days from consumer purchase date

3.8

13 Review
5 Star
82
4 Star
12
3 Star
3
2 Star
1
1 Star
3

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: Molokaikahu
Easy to use...just press the button
I like the simplicity of this tool and it gets the job done right!
Scritto da: Blazndeals
Stapler worked amazingly well
Used this for carpet stapling my trailer runners. Used stainless steel staples and it came out great. Not one misfire. Very easy to use and comes in a nice case. Highly recommend.
Scritto da: rbrown226
Easy to use and great quality!
I was skeptical at the price, however, it works great and is super easy to use. Helped me complete my project quickly.
Scritto da: JR
great product
I'm new at using an air stapler and this one is easy and hasn't jammed yet. I only gave 4 stars because the oil seems to leak out a lot when you set it down. I'll admit that could be operator-error.
Scritto da: Jason Wallen
works as advertised
if you're doing seat covers on a bike or atv this is the ticket! only gripe would make the length of head 1/4 longer but not a deal breaker.
Scritto da: Rf Foley
Almost 5 stars
Works like a champ. I did have one issue. Banged a hand full of staples then when not in use, air was leaking out of the exhaust. I called cust serv and was given the OK to open up the gun. The problem was as I thought. A piece of metal (vry small chip) , likely from machining the barrel had gotten into the seal and was allowing the air to pass. Not much but a hissing when the gun was sitting under pressure. The maker supplies a couple of allen wrenches so the take apart was quick and easy. The 10 minute take apart and reassemble was a lot easier than a return. For the money, nice stapler. It seems well enough made for home owners. Not sure if it would hold up to 8 hour a day use constantly, but for the amateur DIY'er, perfect gun for the price. Took a couple of practice shots to get the PSI where I wanted it but that is to be expected for any such device. And you get a bunch of different size staples. Not a bad deal.
Scritto da: Bern
Works very well
We reupholstered 8 chairs using the Surebonder staple gun. It worked extremely well and gave no problems. I put in a drop of the included machine oil in the air inlet when every new stick of staples was loaded. The recommended air pressure range of 60 to 100 psi is spot on --- below 60 psi the gun will fail to insert a staple. This tool was a bargain for the price.
Scritto da: Kramo
Worked well and without any issues
I rarely purchase a tool that is not "Top Shelf" but I really only ever saw my needing his for one job - installing insulation in a crawlspace. The review looked good and I knew I could complete the task with in the return period for Prime so I took a chance. This little stapler worked flawlessly from the first staple to the last; my guess is I used well over 3,000 staples. Every day when I started and after 3 refills I would drop 1-2 drops of oil in the air fitting as someone here suggested and it worked like a champ. It is light and maneuverable. The tip allowed me to put staples in tight places, some others I was considering looked like the tip would not allow me to maneuver as well. Most of my pneumatic nail and brad guns are Porter Cable, this is every bit as nice as those. As I said I have no idea how it would perform as a commercial installation tool but for my purposes it was a pleasure to use. The case is large enough for the tool and a wrench but it would have been really nice if it also held a decent amount of staples but i'm nitpicking here.
Scritto da: Amazon Customer
Solid gun - needed tweaking
The gun is great. The staples embed nicely and I was able to fire 30 of them off into scrap 2 by 4, the deepest staples provided, no problems. However marking this a 4, because it was not like this out of the box. This did not point to a quality issue - per say but more of a quality assurance issue. When I first used it, it fired a staple and it was perfect. Then I went to fire the second staple; nothing. tried again; nothing. Took the staple track out, and looked and the staple driving pin was bout 3 mm out into the staple track, not allowing the next staple to feed to it. It pushed back in fine. I fired a staple and then it was stuck out again. So I took it to bits a little and removed the inner piston and the staple drive pin showed a little evidence of scraping on one side - so it may not have been 100% flat, perhaps a tiny bit curved. I just rotated the staple pin so that it faced 180 degrees the other way, put it back together. Perfect. Staple after staple. Whilst in there, the bore that the piston slides in is very smooth, the parts appear to be very nicely made. Seeing the internals gives me confidence this will last a long time. Giving a 4 out of 5, not because it is not a good product, but because if anyone tried to shoot more than 1 staple in testing, they would have caught this. A non-tweak-er would likely have sent it back.
Scritto da: HRG
Excellent value - quality gun
I recovered a pool table and had to drive over a thousand T50 staples. Decided I didn't want to squeeze the manual one that many times. Bought this one. It came with 5 packs of staples so the gun really only cost about $25. After shooting said one thousand staples I can say that this is a really well made gun. Didn't misfire once. This one has a viewing window so you can see when you are running low on staples. I am not sure how well it would hold up in a commercial environment but for hobby or occasional use I highly recommend it.
Scritto da: Carloos Mtz
Excelente opción para tapizar, compacta.
Me gustó mucho es mi primer herramienta neumática, la usé para tapizar sillas, funciona muy bien no se trabó ninguna grapa puse más de 1000, llega con maletín de plástico rígido no es la gran maravilla pero cumple su función por el precio, yo compré la que viene con grapas de la marca y llegó completo unos días antes, para los que tienen acceso a tiendas o tlapalerías donde venden Truper sus grapas son compatibles (T-50) eso creo que ayuda mucho ya que son fáciles de encontrar, no tiene ajuste de profundidad eso se regula un poco desde la compresora, para tapizar está bien porque no rompe la tela, consume poca presión y aire eso también me gustó, es una herramienta muy compacta. Lo que no me gusto del todo son los acabados de la herramienta la parte de goma parece que es de otro Modelo tiene buen agarre pero visualmente si es raro, la marca solo son calcomanías, pero en general es un buen producto y lo recomiendo.
Scritto da: Dale
Not T50 compatible
T50 staples will not work in this stapler, the included ones will. So when these are gone so is the stapler. DO NOT wait to test tools until after the return date.. Amazon is good, suppliers are not as accomadating nor honest. T50 staples would jam in the slot if you force them in.
Scritto da: Justin
Works Great And Good Value!
We bought this to make some alterations to old furniture and it worked well out of the box, it does need to be oiled so make sure to oil it every use and after or it may lock up, or install a air oilier on your compressor air line and another for clean air with a hose only used for non oiled air or you will spray oil mist if you do any blowing or cleaning with air like I do. Overall this is decent for the money and the staples make it worth it if you want to be up and running right away.

Související produkty

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array