Sierra International 35-SS625 námořní třída z nerezové oceli Panther Safe-Skeg pro přívěsné motory Select Force, Honda, Mercury/Mariner, Nissan, Tohatsu a Yamaha

Brand:‎Sierra International

3.8/5

3409.70

Sierra International 35-SS625 námořní skeg z nerezové oceli Panther Safe-Skeg pro motory Select Force, Honda, Mercury/Mariner, Nissan, Tohatsu a Yamaha Ať už chcete chránit svůj nový skeg, opravit poškozený nebo jen chcete přidat Nerezová konstrukce 316 námořní třídy Sierra Panther Safe-Skeg je skvěle vyleštěná a instalace trvá jen několik minut! Sierra nabízí celou řadu Ultimate Skeg Protection and Repair. DALŠÍ PODROBNOSTI • Nabízí ochranu z nerezové oceli 316 námořní třídy • Brilantně leštěné s bezešvým designem • Obsahuje odtokový otvor pro ochranu proti korozi a zamrznutí • Instalace trvá jen několik minut • Tloušťka materiálu: 1,5 mm (50 % tlustší než konkurence) • Skluzová deska není nutná kvůli extra tloušťce materiálu Safe-Skeg • Sada obsahuje: Safe-Skeg, montážní materiál, instrukce, imbusový klíč a Loctite 262 INFORMACE O APLIKACI •Navrženo tak, aby pasovalo: Force Outboard – 70-90 HP (od Mercury), 2-taktní přívěsný motor Honda – 75-90-115 HP, 4-taktní přívěsný motor Mercury/Mariner – 50-60 HP (Big Foot), 2- a 4taktní od let 2003 přes současný přívěsný motor Mercury/Mariner – 70-75-80 HP, 2 a 4taktní od let 1984 do současnosti přívěsný motor Mercury/Mariner – 70-90-100-115-125 HP Optimax, 2 a 4taktní od let 1983 do současnosti Nissan Závěsný motor – 70-90-115-120-140 HP, 2-taktní od let 1983 do současnosti Závěsný motor Tohatsu – 70-90-115-120-140 HP, 2-taktní od let 1993 do současnosti Yamaha Outboard- 60-70 80-90-100 HP, 2 a 4 zdvih od roku 1998 do roku 2001 O SIERŘE Sierra se věnuje ochraně vás a vašich investic. Již 50 let Sierra, jedno z nejdůvěryhodnějších jmen v námořním průmyslu, hrdě nabízí vysoce kvalitní díly motoru a pohonu. Jejich produkty splňují nebo překračují část původního vybavení, kterou nahrazuje, a jsou navrženy tak, aby splňovaly dnešní požadavky na motory s vysokým výkonem a zároveň odolávaly drsnému mořskému prostředí. SIERRA. /b> Všechny díly Sierra se kvalifikují pro Sierru. Sierra ručí za to, že její produkty budou bez závad ve zpracování a materiálech po celou dobu životnosti produktu. Sierra bezplatně opraví nebo vymění vadný výrobek. podmínky a omezení. Můžete si prohlédnout Sierru.

Tloušťka materiálu: 1,5 mm (50 % silnější než konkurence). Pro: Select Force, Mercury/Mariner, Nissan, Honda, Tohatsu a Yamaha Outboard Marine Engines. Úplné informace o aplikaci naleznete v popisu produktu níže. Obsahuje odtokový otvor na ochranu proti korozi a zamrznutí. Brilantně leštěné s bezproblémovým designem. Sada obsahuje: Safe-Skeg, montážní materiál, návod, imbusový klíč a Loctite 262.
Brand ‎Sierra International
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 1,132 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎35-SS625
Item Weight ‎1.62 pounds
Manufacturer ‎MARINETECH PRODUCTS INC.
Manufacturer Part Number ‎35-SS625
Model ‎35-SS625
Product Dimensions ‎0.75 x 9 x 18 inches

3.8

13 Review
5 Star
82
4 Star
11
3 Star
4
2 Star
1
1 Star
2

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: PPL who love the South West
Awesome for repairing accident damagd!
Last year after a long weekend at the lake in haste to beat a storm. We jumped in the truck after securing my boat. I for got to raise the outboard. I didn't realize it until after 5 miles of driving. The Skeg was destroyer. I found this product t asked me thousands of dollars. In 20 minutes. Follow the instructions step by step to achieve desired results.
Scritto da: Christian
A++++++
A++++++
Scritto da: Brock Eggleston
Saved my lower unit due to cracked skeg
Skeg on Lower unit had cracked due to hitting a rock. Installed this and it not only looks great it works well. Was easy to locate and install onto the lower unit. Stainless steel fasteners look very nice
Scritto da: DRay
Awesome product
I installed it in the beginning of the season with ease. Probably half hour install. Much thicker and heavier than I imagined. It looks fantastic and add lots of character to my boat when on the trailer. It also helps steering as my other skeg broke off from previous owner. No welding was going to be considered for this aluminum area by me so this is really only option. And I’d recommend it for sure
Scritto da: Chuck
Easy to install, quick fix for a broken skeg.
I bought a SeaRay 180 BR with a 3.0 liter Mercruiser last fall from a dealer that had it on consignment. I saw that it had a big chunk broken out of the rear of the skeg so I almost passed on it. The sales guy (a friend of mine) said just install one of these and it will be good as new. It was super easy to install. Just file off any burrs or divots, tap it in place with a rubber hammer and drill the mounting holes. One little trick I have learned over the years is to use a center punch on the aluminum first to center the drill in the holes on the fitting and keep if from "walking". Then start drilling with a smaller drill bit than the final size. Drill about half way through with the small drill then go to the other side and drill the rest of the way through. The first pilot hole you drilled from the first side will help direct the drill back to the center. When you use the recommended drill size to drill the final hole it will hit the other side dead on.
Scritto da: Kindle Customer
looks great
Does exactly what it says
Scritto da: andrey
Easy installation, perfect fit
Easy installation, perfect fit
Scritto da: Kenneth Baca
A must if your operating your boat in low water level.
Easy install a must for boats that operate in shallow water.
Scritto da: Hootie57
Easy to install
Solid piece to help repair my Skeg after we had found some “hard water” during the last trip out. Fitment was a little off but made a few small modifications and seemed to work well. I’ve used a lot of panther products in the past and they’ve never disappointed
Scritto da: Bev
Fit on a Mercury Classic 60
So although not designed for my 87 Mercury Classic 50, (45 hp 2 stroke, 4 cyl 45 hp) I was able to grind my old front edge slightly and get a great fit. Based on my measurements and the manufacturers feedback, this is the one I chose. The 650 did not fit. This did. Great quality and value. Easy to install 30 minutes.
Scritto da: Marc Sarrazin
Super facile à installer
Parfait pour réparer la pièce briser
Scritto da: Edward W de Jong
Easy to install.
Great product.
Scritto da: Amanda
It was great to hide the damage we had done to our skeg.
Easy to install

Související produkty

hot
hot
Originální Hubometr Stemco - 650-0605
4/5

Kč 3249.44

Originální Hubometr Stemco - 650-0605
4/5

Kč 3249.44

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array