0
0

Celkový:Kč 0.00

Viz košíkPřekontrolovat
LoginRegister
0

Celkový:Kč 0.00

Viz košíkPřekontrolovat
LoginRegister

Stolní pohlcovač kouře Weller WSA350 120v

Brand:Weller

3.6/5

Kč
3847.24

POPIS PRODUKTU Umění ručního pájení existuje již velmi, velmi dlouho, ve skutečnosti tisíce let. Ale bylo to jen do roku 1941, kdy netrpělivý americký opravář rádií, který byl unavený sezením a čekáním, až se jeho pájecí pistole zahřeje, vyvinul metodu pájení s okamžitým ohřevem na bázi transformátoru. Carl E. Weller musel počkat až do konce 2. světové války v roce 1945, aby mohl svou Weller Manufacturing Company spustit. V roce 1960 si společnost Weller Manufacturing Co. v USA patentovala páječku „Magnastat“, která používala magnetickou součást k regulaci teploty na špičce žehličky. V rámci expanze do zámoří, která začala v roce 1959, byl závod Weller GmbH v Besigheimu v Německu spolu s novými závody v dalších zemích organizován na výrobu žehliček s regulovanou teplotou a pájecích pistolí pro primárně průmyslové trhy v celé Evropě a na Blízkém východě. Weller Germany drží krok s rostoucí složitostí potřeb našich zákazníků a stal se celosvětově lídrem na trhu vývoje a výroby produktů pro ruční pájení. Naše výrobky byly hrdě označeny „Made in Germany“, což znamená inovaci a spolehlivost. OD VÝROBCE Weller WSA350 je stolní pohlcovač kouře, který odstraňuje výpary z tavidla z pájecího pracovního stolu. Skvělé pro pracovní prostory používající aktivnější tavidla používaná s bezolovnatou pájkou. Výpary jsou absorbovány vyměnitelným uhlíkovým filtrem - obsahuje jeden náhradní filtr (WSA350F). Stojan umožňuje nastavení pohlcovače kouře do různých úhlů. Ventilátor je tichý a nezpůsobuje výrazný hluk v pracovním prostoru. ESD bezpečné.

Množství
Přidat do košíkuKup nyní

EAN: 0013161054737

Kategorie Nástroje a domácí potřeby, Svařovací & Pájení, Svařovací a pájecí zařízení, Odsávání kouře a dýmu, Extraktory,

Ventilátor je tichý a nezpůsobuje výrazný hluk v pracovním prostoru. Obsahuje jeden náhradní filtr (WSA350F), bezpečný proti ESD. Výpary jsou absorbovány výměnným uhlíkovým filtrem. Odstraňuje výpary tavidla z pájecího pracovního stolu. Skvělé pro pracovní prostory používající aktivnější toky.
Batteries Included? ‎No
Batteries Required? ‎No
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 149 ratings 4.5 out of 5 stars
Included Components ‎1 Weller Branded Product
Is Discontinued By Manufacturer ‎No
Item model number ‎WSA350
Item Package Quantity ‎1
Item Weight ‎2 pounds
Manufacturer ‎WELLER
Material ‎Plastic
National Stock Number ‎3439-01-574-0013
Part Number ‎WSA350
Power Source ‎Hand Powered
Product Dimensions ‎11.3 x 10.2 x 7.1 inches

3.6

3 Review
5 Star
71
4 Star
20
3 Star
3
2 Star
1
1 Star
4

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena*

Scritto da: Brad H
Doesn't seem to have enough suction
I got this to be safe while soldering keyboard kits and it's definitely better than the cheapo one I tried before it, but I have to assume there are better options. It's very big. If you have a small workspace, this might be tricky to work around. It's loud. Not surprising, it's a fan and you need lots of suction to whisk the fumes away so I wasn't surprised by that. For it being so big and loud, it doesn't seem to have a lot of suction if you're not directly against the fan. For instance, I had it tilted down toward the board I was soldering, and if I wasn't 2-3" away from it, the fumes would still come up toward my face. It seems like the front of the fan could be changed to create more of a vacuum where as the wide front it does have doesn't really direct the power of the fan if that makes any sense. I've found that I almost need to have the fan tilted forward and my soldering job be almost underneath it. That makes soldering a bit tough so I have to get a lamp to point under there so I can see. It's not ideal, but it's better than sucking in bad fumes.
Scritto da: Gregory
I'm soldering for a good amount of time and going through quite a bit ...
I do stained glass, and when I'm working on a sizable project, I'm soldering for a good amount of time and going through quite a bit of brushed on flux. My work room is small and has just a small ceiling exhaust fan. I looked at a lot of options and did a lot of online research before buying this. There are a lot of smoke absorbers with the same 5" square filter, and most of them are cheaper than this. My decision came down to a question of air flow. This fan seems to have the highest CFM rating of any that I found. The cheapest competitors are much lower. I wanted to make sure that the fan pulled as much of the smoke as possible away from the work. I'm very happy with the result, as I never see smoke drifting toward me and can't even smell the flux being burned away. The whole device is very solidly built. No cheap parts anywhere that I can see. It should last a long time. There's nothing loose, nothing that looks like it will break or fall apart. Nice construction, and nothing that looks "cheap". Some web sites indicate that this is a "quiet" fan, which I suppose is true compared to a lot of other fans, but in my small space it's very noticeable. When listening to music, I have to turn up the volume a little. The fan doesn't screech or make any noise itself, but there IS a lot of air being moved. The trade off between a little more air noise and a lot less smoke is one I'll take every time. The mounting legs for the unit are small but sturdy, the whole fan is fairly light and easy to move with a convenient handle on the top. Being able to adjust the intake angle is great, and it's very easy with this product. I can get it fairly close to my work at a good angle and that helps keep the smoke down. The whole thing is a little big for my work area, but I can't imagine a smaller device that would do the job, so I think I've got the best possible in this regard until someone changes the laws of physics. You need a high amount of airflow, and a smaller device would have to be very, very noisy. Net result: Outstanding performance for the job, a little louder and bigger than I'd like but probably the best that can be done today. I'm glad I didn't purchase any of the less expensive competitors.
Scritto da: Andrew
Perfect for a hobbyist/occasional soldering!
This is a great little unit for the money! While someone who solders every day/all day (or with lead-free solder, which creates more fumes) will probably want something more powerful/bigger than this, this extractor does a fine job of sucking up flux fumes for hobby use or occasional soldering, which is more my application (I'm a soldering novice who bought it for audio electronics work). I'm not working in the most well ventilated room, and this thing does just fine keeping the air clean. It feels like a good quality, well made unit with a bit of heft to it. It's not terribly loud, but not exactly quiet either. You do need to have it fairly close to what you're soldering for it to suck up all the fumes - it won't work as well from several feet away (it also helps to point the fan inlet directly at what you're working on). So it's fine for things from quick and simple jobs up to component replacement on a smaller to medium sized PCB board. I'd say in the grand scheme of things, it's probably a 4/5 score - but I'm rounding up to 5 due to being a good value for the money IMO. Just be realistic about what a tabletop unit like this can do and you won't be disappointed.

Související produkty

hot
Stolní pohlcovač kouře Weller WSA350 120v
3.6/5

Kč 3847.24

Stolní pohlcovač kouře Weller WSA350 120v
3.6/5

Kč 3847.24

Objevte naši mezinárodní síť

Dodáváme do 28 zemí, více než 200 000 produktů. Zůstaňte v obraze, přihlaste se k odběru newsletteru.

Array

Celkový:Kč 0.00

Viz košíkPřekontrolovat

Kategorie

Všechny kategorie
Jídelní lístek Kategorie U Vozík

Menu