Zildjian Sizzle nýty - 12 bal

Name: Zildjian Sizzle nýty - 12 bal
Brand: Avedis Zildjian Company
SKU: 0642388321621
Price: 622.51 CZK
Availability: InStock

Brand:Avedis Zildjian Company

3.3/5

Kč
622.51

Nýtovací činely, kdysi nazývané hřebíky od Armanda Zildjiana, byly inspirovány bubeníky, kteří do svých autentických čínských činelů vkládali skutečné hřebíky, aby jim dali větší výdrž. Chcete znovu vymyslet svůj jízdní zvuk nebo vylepšit činel FX o trochu více odpadu? Zildjian Sizzle Rivets jsou skvělou první zastávkou. Nýty se do činelů přidávají dodnes, tradičně ve skupinách po třech nebo rovnoměrně rozmístěných kruhových vzorech kolem činelu. Malý shluk nýtů vytváří hřejivý, kouřový jazzový syčivý efekt, který při hraní prodlužuje sustain, nebo přidejte ještě více nýtů, aby váš činel získal ostrý kousavý zvuk, který rychle udusí sustain pro sušší efekt. Slyšíš to. Zildjian Sizzle Rivets vám s tím mohou pomoci.

Množství

Přidat do košíku Kup nyní

EAN: 0642388321621

Kategorie Průmysl a věda, Hřebíky, Šrouby a spojovací materiál, Nýtky, Pevné nýty,

Balení 12 nýtů. Použijte nýty pro ostřejší záběr. 3-nýtový blok pro kouřovou jízdu. Vytvářejte výrazné šumivé efekty a nesmyslné zvuky. Znovu vynalezte svou jízdu nebo upgradujte svůj FX.

Color Name	Silver
Country of Origin	USA
Customer Reviews	4.2 4.2 out of 5 stars 108 ratings 4.2 out of 5 stars
Is Discontinued By Manufacturer	No
Item model number	ZIL ZRIVET
Item Weight	0.704 ounces
Product Dimensions	18 x 5 x 5 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napište svou recenzi

Váš email nebude zveřejněn. Všechna povinná pole jsou označena^*

Vase hodnoceni

Scritto da: Amazon Customer

The real deal

The right material (steel), size, and type for the perfect sizzle. Drill the holes 5/32" to get the right amount of wobble. Slightly widen the bottom ends using a punch or other drift with wide angle, and a hammer. (Withe the cymbal upside-down and the rivet head resting on a heavy piece of metal. ) Split type rivets are easy to install but to me they neither look nor sound right. Now your sizzler is indistinguishable from a factory made sizzle cymbal.

Scritto da: D. R. Hernandez

Not the good old days!

Having used Zildjian cymbals my entire career & having owned a Zildjian with factory rivets, these don’t clome close to the sound they should generate. No sizzle here! DRH.

Scritto da: Brian legner

Perfect

Easy to install with a hammer

Scritto da: Giuliano

A little pricey, they work!

I added this to a very cheap Wuhan China cymbal by punching some holes in it and it really changed the sound for the better. My band-mates were all very impressed.

Scritto da: Amazon Customer

They work

I bought these to take out my old 1965 Zildjian sizzle cymbal and clean, polish and put in new rivits.

Scritto da: J　o

Worked great

Wanted to get a different sound from one of my cymbals and these rivets were the perfect thing. Very easy to install.

Scritto da: Roger

Sizzle Rivets Too Small for traditional cymbal holes

These sizzle rivets are NOT GOOD. They are too narrow for traditional cymbal holes. Even MORE IMPORTANT, these are extremely difficult (if at all) to "spread" the back of so as to keep them in place. The "spreading" part on back of rivet needs to be twice as deep: core of rivet prevents anything to penetrate deep enough to spread properly. Even the slight spread, if/when accomplished, is not wide enough to hold sizzle rivet in place.

Scritto da: T. Weaver

amazing vintage sound returned to the cymbal

great to put the sizzle back, a bit pricy.

Scritto da: Mike

Perfect for the job

I wanted to add some sizzle to an existing surplus Paiste crash cymbal, so I first tried out the effect with a thin metal chain hung outwards from its centre. I then let the cymbal balance on its stand, by spinning it round several times to see where it rested, and marked three equidistant holes about one and a half inches from the edge (ensuring a gap for the place where the cymbal is usually struck, masked the spot with tape, and drilled, then gently smoothed the edges, . With the rivets in place, I was well pleased with the result. Generally speaking, the closer to the edge, the more effective the sizzle, and the heavier the cymbal, the more sustain you're likely to get. Remember it's important that the cymbal's balance should remain undisturbed, and a cheap cymbal will not become magically improved by a few rivets. I could have installed up to three extra rivets between the existing ones, but didn't need to - some drummers prefer to place three rivets close together on the far side of the cymbal in its balanced position, but I found the spaced out position perfectly OK. Zildjian rivets are ideal, right size, right weight. I found a small pair of crimping pliers to bend out the edges of the rivets, which otherwise is tricky. They're obviously very expensive for what they actually are, but I tried several types of paper rivets, etc., with no success. It's a worthwhile investment.

Scritto da: David

Too small. Doesn’t fit standard rivet size

Took a lot of hammering to get them to flare out to size. Maybe just visit your local hardware store instead.

Scritto da: Jimmy Mack

Nice looking bright rivets

- however I'm disappointed as they're not split on the shaft. I'm not sure if I'll be able to use them as intended.